SKF GE 40 ES-2RS Spherical Plain Bearing, Double Sealed, 40mm Bore, 62mm OD, 28mm Inner Ring Width, 22mm Outer Ring Width

SKF GE 40 ES-2RS Spherical Plain Bearing, Double

This SKF GE series radial spherical plain bearing is double sealed and is suitable for pivoting, high load bearing applications where angular misalignment is required, such as in hydraulic cylinder rod ends. Its outer race has a single fracture for ease of inner ring installation, its inner and outer rings have grooves and oil holes for ease of lubrication, its double Nitrile seals keep out contaminants, and its wide inner ring cross section provides high misalignment adjustment. This roller bearing's CN (normal) radial clearance is for applications where thermal expansion does not reduce clearance. This bearing's inner and outer rings are manufactured from through-hardened carbon chromium steel and heat treated to increase hardness for optimum wear resistance. Its spherical contact surfaces are precision ground to maximize surface-to-surface contact of inner and outer rings. This bearing is phosphate treated prior to coating with a dry film lubricant for corrosion resistance and it has an operating temperature range of -22 to 266 degrees F (-30 to 130 degrees C). This spherical plain bearing is suitable for use in vehicle suspensions and heavy equipment articulated joints.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are...

  • Brand: SKF
  • ASIN: B007VHH846

GE25ES-2RS Spherical Plain Bearing, 25x42x20 mm, Double Sealed

GE25ES-2RS Spherical Plain Bearing, 25x42x20 mm, Double

This VXB GE25ES-2RS spherical plain bearing is made of carbon steel and has double seals. It has a 25 mm inside diameter, a 42 mm outside diameter, and a 20 mm depth. This spherical plain bearing has a wide race cross-section for applications that provide high misalignment adjustment. This bearing's race and ball are made of carbon steel for durability and resistance to deformity under heavy loads. Lubrication grooves and holes in the race direct grease into the bearing. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are ra...

  • Brand: VXB
  • ASIN: B002BBF4Z2

GE20ES-2RS Double Sealed Spherical Plain Bearing 20x35x16 Plain Bearings VXB Brand

GE20ES-2RS Double Sealed Spherical Plain Bearing 20x35x16 Plain

This GE20ES-2RS spherical plain bearing is made of carbon steel and has double seals. It has a 20 mm inside diameter, a 35 mm outside diameter, and a 16 mm depth. This spherical plain bearing has a wide race cross-section for applications that support high misalignment adjustment. This bearing's inner and outer races are made of carbon steel for durability and resistance to deformity under heavy loads. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball b...

  • Brand: VXB
  • ASIN: B002BBCTK0

GEZ108ES-2RS Spherical Plain Bearing, 1-1/2 x 2-7/16 x 1-5/16 Inch, Double Sealed

GEZ108ES-2RS Spherical Plain Bearing, 1-1/2 x 2-7/16 x

This VXB GEZ108ES-2RS spherical plain bearing is made of chrome steel and has double seals. It has a 1-1/2" inside diameter, a 2-7/16" outside diameter, and a 1-5/16" depth. This spherical plain bearing has a wide race cross-section for applications that provide high misalignment adjustment. This bearing's race and ball are made of chrome steel for durability and resistance to deformity under heavy loads. Lubrication grooves and holes in the race direct grease into the bearing. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings...

  • Brand: VXB
  • ASIN: B004YL4G5G

GE50ES-2RS Double Sealed Spherical Plain Bearing 50x75x35 Plain Bearings VXB Brand

GE50ES-2RS Double Sealed Spherical Plain Bearing 50x75x35 Plain

This GE50ES-2RS spherical plain bearing is made of carbon steel and has double seals. It has a 50 mm inside diameter, a 75 mm outside diameter, and a 35 mm depth. This spherical plain bearing has a wide race cross-section for applications that support high misalignment adjustment. This bearing's inner and outer races are made of carbon steel for durability and resistance to deformity under heavy loads. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball b...

  • Brand: VXB
  • ASIN: B002BBCTQE

GE30ES-2RS Double Sealed Spherical Plain Bearing 30x47x22 Plain Bearings VXB Brand

GE30ES-2RS Double Sealed Spherical Plain Bearing 30x47x22 Plain

This GE30ES-2RS spherical plain bearing is made of carbon steel and has double seals. It has a 30 mm inside diameter, a 47 mm outside diameter, and a 22 mm depth. This spherical plain bearing has a wide race cross-section for applications that support high misalignment adjustment. This bearing's inner and outer races are made of carbon steel for durability and resistance to deformity under heavy loads. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball b...

  • Brand: VXB
  • ASIN: B002BBCTMI

RBC Bearings B20LSS Radial Sealed Spherical Plain Bearing, 52100 Bearing Quality Steel, Inch, 1.25" Bore, 2" OD

RBC Bearings B20LSS Radial Sealed Spherical Plain Bearing,

This RBC Bearings radial spherical plain bearing has seals on both ends and supports high oscillating radial loads, moderate axial loads in two directions, and moderate angular misalignments. The inner and outer rings are made of through hardened 52100 steel, which meets ASTM International standard A485 for strength, and the contact surfaces are ground and heat treated to a Rockwell hardness of HRC 56 minimum for resistance to wear. Surfaces are phosphate treated and coated with a dry film lubricant for static applications and occasional movements. The outer ring is single fractured (split) for simplified assembly and disassembly. The bearing has oil holes and lubrication grooves in both rings for lubrication in place. Lip contact seals at both ends help retain lubricants and exclude dirt and moisture. The bearing has a maximum operating temperature of 250 degrees F (121 degrees C). This spherical plain bearing meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 22 for quality assurance, and is used in applications such as automobiles, construction equipment, and agricultural machinery, among others.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of...

  • Brand: RBC Bearings
  • ASIN: B003UHVS5Q
  • UPC: 637400001131

RBC Bearings B24LSS Radial Sealed Spherical Plain Bearing, 52100 Bearing Quality Steel, Inch, 1.5" Bore, 2.438" OD

RBC Bearings B24LSS Radial Sealed Spherical Plain Bearing,

This RBC Bearings radial spherical plain bearing has seals on both ends and supports high oscillating radial loads, moderate axial loads in two directions, and moderate angular misalignments. The inner and outer rings are made of through hardened 52100 steel, which meets ASTM International standard A485 for strength, and the contact surfaces are ground and heat treated to a Rockwell hardness of HRC 56 minimum for resistance to wear. Surfaces are phosphate treated and coated with a dry film lubricant for static applications and occasional movements. The outer ring is single fractured (split) for simplified assembly and disassembly. The bearing has oil holes and lubrication grooves in both rings for lubrication in place. Lip contact seals at both ends help retain lubricants and exclude dirt and moisture. The bearing has a maximum operating temperature of 250 degrees F (121 degrees C). This spherical plain bearing meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 22 for quality assurance, and is used in applications such as automobiles, construction equipment, and agricultural machinery, among others.Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of...

  • Brand: RBC Bearings
  • ASIN: B003UHVS7O
  • UPC: 637400001339

GEG30ES-2RS Spherical Bushing Plain Bearing 30 X 55 X 20

GEG30ES-2RS Spherical Bushing Plain Bearing 30 X 55

GEG30ES-2RS Double Sealed Spherical Plain BearingOne Bearing GEG30ES-2RS Double Sealed Spherical Plain Bearing, the inner race can swivel like a ball joint, the inner diameter is 30mm, outer diameter is 55mm and the width is 20mm, this is a popular size that could be used in many applications, bearing has 2 Rubber Seals to protect the bearing from dust or any possible contamination. Item: GEG30ES-2RS Bearing Type: Double Sealed Spherical Bushings Plain Bearing Material: Carbon Steel Closures: 2 Rubber Seals inner Diameter (ID): 30mm outer diameter (OD): 55mm Width/Height/thickness: 20mm Size: 30 X 55 X 20 mm Quantity: One Bearing Basic Dynamic Load Rating: 79,000 KGF Basic Static Load Rating: 399,000 KGF GEG30ES-2RS=GE80D0-2RS Dimensions d D B C 30mm 55mm 32mm 20mm

  • Brand: VXB
  • ASIN: B015RPDME8

GEZ012ES-2RS Double Sealed Spherical Plain Bearing, 3/4 x 1-1/4 x 21/32"

GEZ012ES-2RS Double Sealed Spherical Plain Bearing, 3/4 x

This GEZ012ES-2RS spherical plain bearing is made of carbon steel and has double seals. It has a 3/4" inside diameter, a 1-1/4" outside diameter, and a 21/32" depth. This spherical plain bearing has a wide race cross-section for applications that support high misalignment adjustment. This bearing's inner and outer races are made of carbon steel for durability and resistance to deformity under heavy loads. Rubber seals on both sides of the bearing keep the lubricant in and contaminants out. This spherical plain bearing is suitable for use in pivoting, high load bearing applications, such as in heavy equipment suspensions and articulated joints.Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the bal...

  • Brand: VXB
  • ASIN: B004YL4FNO
Similar 2rs Spherical Bushing Plain Bearing Results
2rs Spherical Bushing Plain Bearing Video Results

GE90ES-2RS Spherical Bushing Plain Bearing by VXB

2rs Spherical Bushing Plain Bearing

http://www.vxb.com/page/bearings/PROD/Kit7880 GE90ES-2RS Double Sealed Spherical Plain Bearing, the inner race can swivel like a ball joint, the inner diameter is 90mm, outer diameter is 130mm and the width is 60mm.

  • Likes: 1
  • View count: 1149
  • Dislikes: 0
  • Comments: 0
Tags: Plain Bearing,Bearing (Invention)

GE90ES-2RS Spherical Bushing Plain Bearing 90x130x60 Plain Bearings

2rs Spherical Bushing Plain Bearing

GE90ES-2RS Spherical Bushing Plain Bearing 90x130x60 Plain Bearings VXB.com, the online supplier of ball bearings, distributor of linear motion and ceramic bearings. http://www.vxb.com/GE90ES-2RS-Spherical-Bushing-Plain-90x130x60-Plain-p/kit7880.htm Product Code: KIT7880

  • Likes: 0
  • View count: 1
  • Dislikes: 0
  • Comments: 0
Tags: VXB Bearings,ball bearings,official,vxb.com,bearings,bearing,supplier,distributor,online

GEG30ES-2RS Spherical Bushing Plain Bearing 30x55x20

2rs Spherical Bushing Plain Bearing

GEG30ES-2RS Spherical Bushing Plain Bearing 30x55x20 VXB.com, the online supplier of ball bearings, distributor of linear motion and ceramic bearings. http://www.vxb.com/GEG30ES-2RS-Spherical-Bushing-Plain-30-X-55-X-20-p/geg30es-2rs.htm Product Code: GEG30ES-2RS

  • Likes: 0
  • View count: 6
  • Dislikes: 0
  • Comments: 0
Tags: VXB Bearings,ball bearings,official,vxb.com,bearings,bearing,supplier,distributor,online