Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs w/ LCD Display Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply

Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery

* NiMH/NiCD 1~15 cells ( 1.2v to 18v) * Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v) * Li-Fe 1~6 series * Sealed Lead Acid (SLA) * Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v * Charge your LiFE Packs: 6.6v * Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v * Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v * Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v * Charge your Airsoft LIPO/LiFe Packs Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately. Charger Specifications: DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source. Specification Operating voltage DC 11~18 volts AC 100~240V, 50/60Hz Charge/discharge power max. 50/5 Watts Pb 2~20V Charge current 0.1 to 5.0A Discharg current 0.1 to 1.0A No. of cycle 1 to 5 times Dimension 130x85x33 mm< User's setting-up parameters Battery voltage type LiIo:3.6V, LiPo:...

  • Brand: Tenergy
  • ASIN: B00466PKE0
  • UPC: 793631761166

XCSOURCE 5pcs 3.7V 1200mAh 25C Lipo Battery + 5 in 1 Battery Charger for Syma X5S X5SW X5SC Quadcopter BC636

XCSOURCE 5pcs 3.7V 1200mAh 25C Lipo Battery +

Features: Good product with superior material, which is more durable & practical, and not easy to damage. It supports charging 5 batteries at the same time, saving a lot of time. It provides overcharge and short circuit protection, more safety. With stable performance, it is practical and durable. Fine workmanship and perfect style. It can help your quadcopter fly much higher and quicker, more secure. Easy to install and convenient to use. When charging is completed, the charging indicator light will automatically turn off. Compatible Model: Syma X5S X5SW X5SC. Specifications: Battery: Lithium Polymer (Li-Po) Battery Maximum Continuous Discharge Rate: 25C Capacity: 1200mAh Voltage: 3.7V Size: 54*28.5*9mm Charger: Type: 5in1 Charger Input: DC 5V, 0.5-2.5A Output: DC 3.7V, 500mA Supported charging 5 batteries at once: Yes Size: 40*35*13mm Package Includes: 5 x Lipo Battery 1 x Battery Charger 1 x USB Cable

  • Brand: XCSOURCE
  • ASIN: B01M6V2VVV

AT LCC AC DC Adapter for E-flite 1-Cell 3.7V 0.3A DC Li-Po EFLC1000 E-flite 1-Cell 3.7V 0.3A DC Li-Po EFLC1000 Battery ChargerCharger Power Supply Cord Cable PS Wall Home Charger

AT LCC AC DC Adapter for E-flite 1-Cell

This products from AT LCC is specially designed to meet the power needs of your device. It will enables you to simultaneously operate your device and charge its battery (if applicable) from any standard electrical power outlet either at home, office, or while traveling abroad. This lightweight and easy-to-carry adapter is the ideal portable power source for your deviceNotice: 1. Please make sure the output and plug size of this item are accordant before you order. 2. If you use this item for a long time, please keep it suitable ventilating and humidity. Do not put it on the skin products. 3. Please feel free to contact us if you have further questions.We will be more than happy to assist youWarranty: 30 Days Money Back Guarantee / 60 Days Free Exchange With Paid Return Label / 360 Days Anytime Worry-Free Warranty! / Please contact us with any questions or concerns - we are here to help!

  • Brand: AT LCC
  • ASIN: B07CKR1GGL
  • UPC: 765044689382

18650 Battery Charger,MiBOXER 4 Bay LCD Display Universal Smart Battery Charger for Rechargeable Batteries NiMH NiCd Li ion LiFePO4 IMR 12440 14500 16340 18650 RCR123 26650 AAA AA Battery Charger

18650 Battery Charger,MiBOXER 4 Bay LCD Display Universal

SpecificationsC4 is a smart charger designed by miboxer team,compatible with almost all types of rechargeable batteries like Li-ion/IMR/INR/ICR/Ni/MH/Ni/Cd/LiFePO4 batteries,as well as a high grade performance.With a large digital LCD display,easy to understand battery charging parameters and processes.C4 has different charging features and modes according to different type battery charging.It use standard Li-ion battery charging mode when work with Li-ion/IMR/INR/ICR/LiFePO4 batteries;Use a full charge mode for Ni-MH, Ni-Cd batteries charging process.Current:Li-ion/LiFePO4:(High:800mA*4,Low:100mA*4)Ni-MH/Ni-Cd:4.【Compatible Batteries & Voltage Options】MiBOXER universal battery charger with input,Li-ion / IMR / INR / ICR / LiFePO4: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430,14500, 14650, 16500,16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490,18500,18650,22500, 22650,25500, 26500, 26650 ; Ni-MH / Ni-Cd: AA, AAA, AAAA, C>Features1. Capable of charging four batteries simultaneously2. Each of the Four battery slots monitors and charges independently3.Compatible with all different type of cylindrical rechargeable lithium battery.4.Up to 800mA charging speed in a single slot.5.High precision calibration of voltage source.6.Rever...

  • Color: C4
  • Brand: MiBOXER
  • ASIN: B07G39184Q
  • UPC: 735551812306

Kamas AOKoda CX605 CX610 CX610HV 6CH DC/XT60/USB Battery Charger for 3.7V 1S Lipo Battery - (Color: CX610HV)

Kamas AOKoda CX605 CX610 CX610HV 6CH DC/XT60/USB Battery

CX605: 0.1A~0.5A Red LED digital displayCX610: 0.1A~1A White LED digital displayCX610HV: 4.35V Upgrade Version can not charge 3.7V lipo battery. Features:1. Simple operation, plug and play.2. Internal chip intelligent temperature test, to ensure the safety of charging.3. Six channels independent charging output, can charge six batteries simultaneously.4. DC 3.5mm jack / battery dedicated XT60 interface / Micro USB, three input methods.5. Charging current setting range 0.1A~1A CX610 / 0.1A~0.5A CX605.6. LED digital tube shows input voltage, six channel battery voltage, input low voltage protection value and setting current value.7. USB 5V 2.4A/2.0A/1.0A Smart fast charging interface to support apple, Android mobile fast charge protocol.Descriptions:1. Round 3.5mm jack dc input range: 9V-26V 24W2. XT60 battery specific interface voltage input range: 9V-26V  3~6S LiPo3. Micro USB interface input voltage current range: 5V 1A/2A/2.4A4. In the DC input mode, the setting range of the over discharge voltage: 9V~24V5. XT60 battery interface, over voltage setting range: Smart settings and user manual tuning6. Battery charging end voltage: 4.20V+-1%7. Battery charging power: 4Wx6ch CX610. 2Wx6ch CX6058. Battery charging current: (0.1-1.0A)x6ch CX610. (0.1-0.5A)x6ch CX6059. Suppo...

  • Color: Cx610hv
  • Brand: Kamas
  • ASIN: B07R743NVL
  • UPC: 786149262799

T-Power (6.6 ft Long Cable) Compatible with BC-1S06 6 Ports 1S 3.7V Li-Po Battery Balance Charger Replacement Ac Dc Adapter Switching Power Supply Cord Charger

T-Power (6.6 ft Long Cable) Compatible with BC-1S06

T-Power ac adapters are made with the highest quality materials tested by manufacturer to match and /or exceed specifications of OEM products . Total Cord Length Is Extended to 6.5 ft Input Voltage Range: AC 100V - 240V 1-year limited warrantyCompatible with: 12V 2A Power Supply Adapter For Walkera Hubsan RC Quadcopter

  • Brand: T POWER
  • ASIN: B010EGM9NA
  • UPC: 709112395089

3 Sets Kits 3.7V Li-ion 18650 Lithium Lipo Battery Charging Board 5V USB Step UP Module

3 Sets Kits 3.7V Li-ion 18650 Lithium Lipo

Battery Charging Module: 1.Module type: Micro usb input Lipo Battery Charging Board 2.Charge mode: Linear charging 3.Charge Current: >=1A 4.Charge precision: 1.5% 5.Input voltage: 4.5V-5.5V 6.Full charged voltage: 4.2V 7.Led indicator: Red is charging, Blue is full charged 8.Input interface: Mirco USB 9.Work temperature:-10â"ƒ~85â"ƒ 10.Battery discharge protection voltage:2.5V 11.Battery overcurrent protection current:3A 12.Size: 26*17 MM 13.This module is used for 18650/lithium Polymer charging and Protection. USB Step Up Board: 1 Ultra-small PFM Control onboard DC / DC boost controller chip. 2. Input voltage: DC 0.9V-5V 3. output:DC 5V 0.6A 4. On-board with working indicator light. 5. PCB size: 29x18.8x8.5 (mm) Package include: 3x TP4056 battery charing protection board 3x USB 5V 0.6A Step Up Board 3x on/off switch

  • Brand: Delinx
  • ASIN: B07JNT728T
  • UPC: 657008885438

GeeWin 4 Set Mini MP1584EN DC-DC 2A Boost Converter Adjustable Power Step Up Module 3.7V to 9V 5V + TP4056 Lithium Battery Charger Module Micro USB 5V 1A with Protection

GeeWin 4 Set Mini MP1584EN DC-DC 2A Boost

Specification: TP4056 Lithium Battery Charger Module: Input voltage: 5V Charging cut-off voltage: 4.2V ± 1% Maximum charge current: 1000mA Battery over-discharge protection voltage: 2.5V Battery overcurrent protection current: 3A Board size: 2.6 * 1.7CM Note: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly. Boost Converter Adjustable Power Step Up Module: Input voltage: 4.3 V to 27 V Output voltage: 4.5 V to 8 V Output current: 2 A (maximum) Static current: about 0.5 mA Size: 3.3X2.3X0.9 CM Warm Tips: These boards are adjustable current limiting, fixed 2A current limit. Please make sure that this module within its working range before using. Please don't output short circuit, otherwise the board would burn out. When setting the parameter, please make sure output voltage is stable before using the module to avoid any possible damage. Package Included: 4 * TP4056 Lithium Battery Charging Board Charger Module 4 * Mini DC-DC 2A Boost Converter Step Up Module

  • Brand: GeeWin
  • ASIN: B07PS7S3SC
  • UPC: 791281406284

uxcell Power Supply DC 3.7V 2000mAh 455572 Li-ion Rechargeable Lithium Polymer Li-Po Battery

uxcell Power Supply DC 3.7V 2000mAh 455572 Li-ion

Description:This battery is really the latest state of the art technology in rechargeable. It is extremely thin, light weight and super thin compared to any rechargeable chemistry.Low weight, small size but huge capacity.The other advantage of the Lithium Polymer technology is the very low self discharge . Features:* Excellent safety performance* Lightweight* High capability* Low internal resistance* Excellent discharge performance* 1C Discharge Rate* Long cycle time Applications: Electrical Teethbrush, MP4, MID, monitor, backup power, Portable DVD, POS machine, Desk vidio, motor, drill and Digital camera . Note :Red connect "+" ,Black connect "-" ; the battery size has -3mm-1mm tolerance, In order not to damage the battery or shorten battery life, high voltage charging and incorrect connecting of the positive and negative pole is prohibited.Please make sure there are no wrong positive and negative connection between your charging device and the JST Head.This battery is not suitable for high rate discharge UAV applications.

  • Brand: uxcell
  • ASIN: B0798PBZCP

XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420

XCSOURCE 5 pcs 1A 5V Micro USB TP4056

MINI USB input terminal with a female, can be directly input to do with the phone charger rechargeable lithium battery, and still retains the input voltage wiring pads, can be very convenient DIY. This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. Specifications: Input Voltage: 4.5~5.5V Full charging voltage: 4.2V Max output current: 1A Power Indicator: Red stands for charging, Green stands for fullly charged. Input interface: MINI interface Item Size: 25mm*19mm. It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection. Instructions / Precautions: Test current meter in series with the charge sheet only 5V input. Charge current is best battery capacity 0.37C, is 0.37 times the capacity, such 1000mAH battery charging current 400 this is enough. The effect of excessive charging speed backward, rushed over battery voltage out on much! Not too small and too long charging connector wires. Such big connection resistance. Too thin, then rushed over battery voltage out on much. Connected to the battery the best good contact. Otherwise rushed over battery voltage out on much. If the 5V input voltage is high, such as 5.2 or even 5.5, will result in insufficient cha...

  • Brand: XCSOURCE
  • ASIN: B01DRT4PWY
Similar 3.7v Dc Lipo Charger Results
3.7v Dc Lipo Charger Video Results

220V AC to 3.7V DC converter for Charging Battery with Transformer - 18650 Lithium ion Charger 3.7 v

3.7v Dc Lipo Charger

220V AC to 3.7V DC converter for Charging Battery with Transformer - 18650 Lithium ion Charger BUY Power Bank : https://bit.ly/2Y5UsGI RELATED VIDEOS 1.How to make 220v AC from a 12v Car Alternator at Low RPM https://www.youtube.com/watch?v=Be5f1WUfhUM 2.How to make a 5V Aluminium Battery at h...

  • Likes: 433
  • View count: 73635
  • Dislikes: 83
  • Comments:
Tags: 220v,3.7v,3.7 v,220V AC,3.7V DC,DC converter,Charging Battery,DC converter for Charging Battery,C...

3.7v Charging Circuit and Battery

3.7v Dc Lipo Charger

Today at Badgerworks we look at how build a rechargeable power supply for your projects, all with cheap components and some simple soldering. Music: The SteamGeezer Shuffle - Agricultural Light & Magic

  • Likes: 118
  • View count: 15311
  • Dislikes: 17
  • Comments:
Tags: Battery,LiPo,Lithium Polymer,Charging,USB,Soldering,Solder,Electronics,DIY

How To Make 3.7V Lithium-ion Battery Charger Without IC. Make 3.7v battery full indicator circuit

3.7v Dc Lipo Charger

How to make 3.7v battery charger at home. 3.7v battery fully charged indicator without ic. How to make 4v battery chager at home without any IC. Simplest 3.7v battery chager circuit build at home with battery high/low voltage indicator. kese 3.7v battery charger banaya jaye gharmae. 3.7 volt ba...

  • Likes: 145
  • View count: 6227
  • Dislikes: 9
  • Comments:
Tags: 3.7v lithium-ion battery charger circuit,Basic 3.7 volt battery chager circuit build at home,Batt...

How to Make 3.7V Battery Charger At Home

3.7v Dc Lipo Charger

How to Make 3.7V Battery Charger At Home Awesome idea 2 life hacks how to make Night light Night lamp https://youtu.be/HQ0mKr4mHh8 How to make POWERFUL cutter diy TOOL https://youtu.be/VrDl40xyElg Bulbs Brightness Control Dimmer Switch https://www.youtube.com/watch?v=NIWfbZb4u1s Convert ol...

  • Likes: 167
  • View count: 18901
  • Dislikes: 40
  • Comments:
Tags: Technical Creative Channel TCC,How to Make 3 7V Battery Charger At Home,How,How to,How to Make,Ho...

3.7v Li-Ion 18650 Battery charger using LM2596 DC-DC buck converter | single battery

3.7v Dc Lipo Charger

In this video how to make a 3.7v Li-Ion 18650 Battery charger using LM2596 DC-DC buck converter step-down power module. 18650 Battery Maximum charger voltage should be 4.0v o 4.2v DC ------------------------------------------------------------------------------- Download Circuit diagram and detai...

  • Likes: 181
  • View count: 26565
  • Dislikes: 41
  • Comments:
Tags: power supply,dc to dc step up converter,step up converter,battery,18650,charge,power bank,lipo,el...