Lyman 4 Cavity 452460 4C Mould 45 Cal. 200 Grains Pistol Bullet Mould

Lyman 4 Cavity 452460 4C Mould 45 Cal.

Popular semi wadcutter bullet for the 45 Auto. Excellent target accuracy.

  • Brand: Lyman
  • ASIN: B005I0KGHY
  • UPC: 011516204608

Lyman, Pistol Bullet Mould, 9mm Luger, 147 Grains

Lyman, Pistol Bullet Mould, 9mm Luger, 147

Lyman Bullet Molds are made from solid leaded-steel and machined to an exact and smooth super fine finish. The molds are then heat treated (that is why they are blue in color) and feature hardened steel alignment pins to provide many years of bullet casting service. Sprue plates are made from solid steel, ground flat and held tightly in place with tempered steel spring washers and screws. In addition, break-in is often half the time required for iron molds. Mold handles are not included. Hardwood Handles are not included and must be purchased separately. Weight given are Lyman's weights with suggested alloy; actual weight may vary due to alloy mixture used. Specifications: - Material: Steel - Capacity: 2 - Diameter: 0. 356" - Bullet Style: Flat Nose Bevel Base - Handle Included: No - Gas Check: No - Bullet Weight: 147 Grains - Mold Caliber: 9mm

  • Color: Unknown
  • Brand: Lyman
  • ASIN: B005I0I7A2
  • UPC: 011516506375

Lyman Cast Bullet Handbook 4Th Edition

Lyman Cast Bullet Handbook 4Th

Comprehensive manual on cast bullets and performance from the world's leading cast bullet authority.

  • Color: Multiple
  • Brand: Lyman
  • ASIN: B004DWBKQY
  • UPC: 757183305872

VANKER 6 Cavities Waterdrop Aluminium Lipstick Mold Makeup Mould for DIY Lip Rouge Balm

VANKER 6 Cavities Waterdrop Aluminium Lipstick Mold Makeup

Description:100% Brand New! High qualityUsage: Pour liquid lipstick into the mold, wait for 30 minutes, or put it into refrigerator or 20 minutes, so that liquid can be cooled to solid.1. When receive the mold please check if there is any stain inside the filling slot, if there is. Please wipe it off with soft cloth. 2. When cleaning the mold. Please wipe the mold and inside slot with soft cloth, if needed to storage for long time please apply  white oil or olive oil to the slot.If for frequent use, please remember to apply White Paraffin or Silicone Oil to the slot for maintenance the mold in good condition.3. If it was the first time to use the mold or after long time storage, it will be better that you give up the first 2-3 batches of the filled material. In this case you can remove off the maintenance oil or lipstick residue left by last time.4. Warning: Please avoid to touch with water, if you are not careful and touch with water please take dry and wipe it with a soft cloth immediately.Specification:Material: Aluminium Color: SilverShape: Water dropSize: 6 holesPackage Included:1 * 6 holes Lipstick Mold Please kindly Note: Items will be repackaged to save your shipping charge & to be environmentally friendly. We guaranty the item will be protected well in bubble bags,...

  • Brand: Vanker
  • ASIN: B07143RW8Y
  • UPC: 095347907549

Bullet Mold 2 Cavity Aluminum .300 Caliber Hollow Base 59gr Bullet with a Round/Flat Nose Profile Type. Designed for use

Bullet Mold 2 Cavity Aluminum .300 Caliber Hollow

NOE Bullet Mould 300-59-RF-BZ5-102The 300-59-RF-BZ5-102 is a 2 Cavity Aluminum bullet mold. This bullet mold drops a .300 caliber Hollow Base 59 grain bullet with a Round/Flat nose profile type. Designed for use in airguns. This is an RG2 Removable Guide Style Hollowpoint bullet mold. This bullet mold can be cNOE Bullet Moulds is a premium manufacturer of bullet molds and casting tools. All molds are cut from 2024 T351 Aluminum or Free cutting brass with a heavy steel sprue cutter and pins to provide a lifetime of trouble free service. We recommend the use of sprue plate lube to help maintain your mold. We use state of the art CNC mills and lathes to produce some of the most innovative products available. Moulds do not come with handles. For Best results, we recommend our premium mould handles or Lee 6 Cavity handles may fit with some minor alteration.Manufacturer: NOE Bullet Moulds, LLCModel Number: 300-59-RF-BZ5-102

  • Brand: NOE Bullet Moulds
  • ASIN: B07CT951S5
  • UPC: 812017004366

Bullet Mold 2 Cavity Aluminum .454 Caliber Plain Base 167gr Bullet with a Semiwadcutter Profile Type. This Mould Casts t

Bullet Mold 2 Cavity Aluminum .454 Caliber Plain

NOE Bullet Mould 454-167-SWC-AC2-21The 454-167-SWC-AC2-21 is a 2 Cavity Aluminum bullet mold. This bullet mold drops a .454 caliber Plain Base 167 grain bullet with a Semiwadcutter profile type. This bullet mold casts the classic semi-wadcutter profile bullet for 45 ACP. NOE Bullet Moulds is a premium manufacturer of bullet molds and casting tools. All molds are cut from 2024 T351 Aluminum or Free cutting brass with a heavy steel sprue cutter and pins to provide a lifetime of trouble free service. We recommend the use of sprue plate lube to help maintain your mold. We use state of the art CNC mills and lathes to produce some of the most innovative products available. Moulds do not come with handles. For Best results, we recommend our premium mould handles or Lee 6 Cavity handles may fit with some minor alteration.Manufacturer: NOE Bullet Moulds, LLCModel Number: 454-167-SWC-AC2-21

  • Brand: NOE Bullet Moulds
  • ASIN: B07CT871G7
  • UPC: 812017014792

Bullet Mold 2 Cavity Aluminum .503 Caliber Plain Base 354gr Bullet with a Round/Flat Nose Profile Type. This Mould Casts

Bullet Mold 2 Cavity Aluminum .503 Caliber Plain

NOE Bullet Mould 503-354-RF-AF4-101The 503-354-RF-AF4-101 is a 2 Cavity Aluminum bullet mold. This bullet mold drops a .503 caliber Plain Base 354 grain bullet with a Round/Flat nose profile type. This bullet mold casts a light for caliber plinking bullet for the 500 S&W Magnum. This is an RG2 Removable GuNOE Bullet Moulds is a premium manufacturer of bullet molds and casting tools. All molds are cut from 2024 T351 Aluminum or Free cutting brass with a heavy steel sprue cutter and pins to provide a lifetime of trouble free service. We recommend the use of sprue plate lube to help maintain your mold. We use state of the art CNC mills and lathes to produce some of the most innovative products available. Moulds do not come with handles. For Best results, we recommend our premium mould handles or Lee 6 Cavity handles may fit with some minor alteration.Manufacturer: NOE Bullet Moulds, LLCModel Number: 503-354-RF-AF4-101

  • Brand: NOE Bullet Moulds
  • ASIN: B07CT6L1M5
  • UPC: 812017016741

Copper Foil Tape with Conductive Adhesive (1inch X 12yards) - EMI Shielding, Stained Glass, Paper Circuits, Electrical Repairs, Soldering - Extra Long Value Pack at A Great Price

Copper Foil Tape with Conductive Adhesive (1inch X

Self-adhesive copper foil tape. Each roll is 12yards long and 1 inch wide. The tape has Dual conductivity so current will flow through both sides and the adhesive. One side is coated with a strong adhesive which is protected by paper backing on the roll. Tape is resistant to oxidization and discoloration. Suitable for indoor and outdoor use. The tape has a wide variety of uses and will perform perfectly when applied in the following roles: EMI guitar shielding, soldering, stained glass, paper circuits, educational aid, electrical repairs, household repairs, bonding, grounding, decoration and many more. We are so confident that our laboratory tested product will arrive in perfect condition and solve your problems that we give you a FULL REFUND if it doesn't. Click "Add to Cart" now to buy with confidence.

  • Brand: Kraftex
  • ASIN: B018RDZ3HG
  • UPC: 683203920681

Bullet Mold 3 Cavity Aluminum .225 Caliber Plain Base 51gr Bullet with a Spire Point Profile Type. Designed for The 222

Bullet Mold 3 Cavity Aluminum .225 Caliber Plain

NOE Bullet Mould 225-51-SP-BA5-42The 225-51-SP-BA5-42 is a 3 Cavity Aluminum bullet mold. This bullet mold drops a .225 caliber Plain Base 51 grain bullet with a Spire point profile type. Designed for the 222 223 and 22-250. NOE Bullet Moulds is a premium manufacturer of bullet molds and casting tools. All molds are cut from 2024 T351 Aluminum or Free cutting brass with a heavy steel sprue cutter and pins to provide a lifetime of trouble free service. We recommend the use of sprue plate lube to help maintain your mold. We use state of the art CNC mills and lathes to produce some of the most innovative products available. Moulds do not come with handles. For Best results, we recommend our premium mould handles or Lee 6 Cavity handles may fit with some minor alteration.Manufacturer: NOE Bullet Moulds, LLCModel Number: 225-51-SP-BA5-42

  • Brand: NOE Bullet Moulds
  • ASIN: B07CT871G2
  • UPC: 812017001976

LEE PRECISION 90268 1 Cavity Bullet Mold.45-70 Government (.459" Diameter), 405 Grains, Flat Nose Hollow Base

LEE PRECISION 90268 1 Cavity Bullet Mold.45-70 Government

Aluminum molds heat up and cool down faster than iron or steel molds and good bullets can usually be produced only after a few casts. In addition, aluminum blocks are one-third the weight of iron or steel mold blocks offering the bullet Caster less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Weights given are Lee weights with suggested alloy; actual weight may Vary due to the alloy mixture used. Features: - tangential Cut-Off helps to eliminate the accuracy robbing NIP at the sprue - machined aluminum mold blocks and hard anodized sprue plate includes: - hardwood handles specifications: - material: aluminum - capacity: 1 - diameter: 0.459 inch - bullet style: flat nose - handle included: yes - gas check: no - bullet weight: 405 grains - mold caliber: 45-70 Government.

  • Brand: LEE PRECISION
  • ASIN: B005KW72RW
  • UPC: 734307902681
Similar Base Bullet Mould Results
Base Bullet Mould Video Results

Casting 405 gr. 45 cal. bullet with lee mould

Base Bullet Mould

Casting bullets for the springfield trapdoor with the lee 405 grain 45 caliber hollow base mould.

  • Likes: 36
  • View count: 11317
  • Dislikes: 3
  • Comments:
Tags: hollow,base,springfield,trapdoor,45,caliber

Flashing on Bullet Base - Cast Lead Bullet Casting Problems

Base Bullet Mould

Things to prevent flashing on your bullet base or tail when casting lead bullets. - Don't over tighten the spru plate bolts - Don't touch the spru plate handle while pouring lead - Make sure spru plate is flat on the mold under its own weight - Make sure there's no lead or dirt on top side of the...

  • Likes: 13
  • View count: 1686
  • Dislikes: 1
  • Comments:
Tags: cast bullet,boolit,casting problems,bullet,bullet flashing,flashing,bearing01,wheel weights

Cast Bullet Molds by Lee and Ideas

Base Bullet Mould

Great Lee molds, but give shooters out-seated full wadcutters for power, sport and utility, not just for target. You sell more molds and corner a market. Here's one possible design for hollow base shotgun and flat base revolver. Call 'em "LeeShocks"?

  • Likes: 152
  • View count: 22280
  • Dislikes: 9
  • Comments:
Tags: shooting

Bullet Casting 101

Base Bullet Mould

LIKE WHAT YOU SEE? CONSIDER PURCHASING A MAN CAN: https://goo.gl/Vam7yR AMAZON Store: https://amzn.to/2H7Lq6Y PATREON: https://www.patreon.com/iv8888 CHECK OUT OUR MUSIC CHANNEL: https://www.youtube.com/c/Guitarsenal This covers the BASICS....there is much more to this dying art form. If you wa...

  • Likes: 1728
  • View count: 134111
  • Dislikes: 26
  • Comments:
Tags: basic,bullet,casting,101,entry,level,diy,homemade,bullets,boolits,CBA,molds,lee,lyman,rcbs

NOE 316-202-RN plane base bullet mold review

Base Bullet Mould

I review a 5 cavity NOE bullet mould. Created with MAGIX Movie Edit Pro 2016

  • Likes: 10
  • View count: 305
  • Dislikes: 0
  • Comments:
Tags: reloading,shooting,bullet,casting,MAGIX,Movie,Edit,Pro,2016