Small Block Chevy Hi-Rise Intake Manifold, Plain Finish

Small Block Chevy Hi-Rise Intake Manifold, Plain

If you're building a high-performance Small Block Fits Chevy on a budget, then this is the intake manifold for you! The Speedway Hi-Rise aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs. Fits 1957-86 S/B Fits Chevy engine applications. Power range is 1500-6500 RPM Larger-than-stock plenum and runners complements other upgrades Supports larger engines & enhances RPM potential Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane Dual distributor hold-downs Accepts HEI distributorAvailable in plain or polished finish

  • Brand: Speedway Motors
  • ASIN: B01N7WB7EH

JEGS 513002 Intake Manifold Small Block Chevy with 1996-Up Vortec L31 Cast Iron

JEGS 513002 Intake Manifold Small Block Chevy with

Intake ManifoldSmall Block Chevy with 1996-Up Vortec L31 Cast Iron HeadSquare Bore (non-EGR)Idle to 5500 RPMCast Aluminum Port exit dimensions: 1.04" x 2.03"Recommended Intake Gasket: JEGS p/n 555-210003Estimated runner length - Shortest: 4.00"Estimated runner length - Longest: 6.50"Manifold height: (A) 4.13", (B) 5.21"Click here to determine carburetor pad height.May also be used on Vortec or 1995-Earlier blocks with Vortec pattern cylinder headsAccepts late model alternator, water neck, AC, and HEINo provision for divorced or heated chokeStock/stamped steel valve covers may require 3/16" (or thicker) valve cover gaskets. We recommend: 720-168, 720-5867 or 375-1648 for adequate runner clearance.JEGS Carb Recommendations/NotesCarburetors 570 CFM670 CFM770 CFMUp to 300 HP300 to 400 HP400 to 500 HPManual Choke 510-0-81570 510-0-81670 510-0-81770Electric Choke 510-0-80570 510-0-80670 510-0-80770Carburetor Studs 555-158401-1/2" StudsSuggested for carb and gasket only 555-158412" StudsSuggested for carb and 1/2" spacer 555-158422-1/2" StudsSuggested for carb and 1" spacer 555-158463-1/2" StudsSuggested for carb and 2" spacerCarburetor Base Gaskets555-16100Open 555-161054-HoleIntake Manifold Bolts 555-83201SBC - Vortec Carburetor Fuel Inlet Lines & FittingsCarburetor SpacersFuel Filt...

  • Brand: JEGS
  • ASIN: B078WHSYHZ
  • UPC: 889944054603

Edelbrock 2701 Performer Intake Manifold

Edelbrock 2701 Performer Intake

The Edelbrock Performer Intake Manifold delivers superior performance with square-bore carburetors. Horsepower gains from idle to 5, 500 RPM, when used with Performer Series square-bore or Thunder Series AVS carburetors. Dyno tests show that the power gains an extra 5 horsepower, 9 foot / pounds and torque across the entire RPM range over their own performer manifolds.

  • Brand: Edelbrock
  • ASIN: B00063046Q
  • UPC: 085347027019

Speedmaster 1-147-019 Chevy BBC 454 MidRise Air Oval Port Intake Manifold Satin

Speedmaster 1-147-019 Chevy BBC 454 MidRise Air Oval

MidRise Intake Manifold Big Block Chevy 454 Oval PortHeight: 4.650 in. Non-EGR RPM Range: 1,500-6,500 Satin Finish

  • Brand: Speedmaster
  • ASIN: B07FP9BMV5
  • UPC: 012933016867

Weiand 8124 Intake manifold

Weiand 8124 Intake

Weiand Action Plus Intake Manifolds feature a dual plane design which improves manifold efficiency and delivers maximum horsepower and torque. These manifolds are designed using permanent mold casting process to provide lighter, smoother and a better look. They include exhaust crossover which enhances drivability.

  • Brand: Weiand
  • ASIN: B000LUBRRO
  • UPC: 090127645383

JEGS 513000 Intake Manifold for 1955-1986 Small Block Chevy 265-283-302-327-350

JEGS 513000 Intake Manifold for 1955-1986 Small Block

Intake Manifold1955-1986 Small Block Chevy 265-283-302-327-350-400Square Bore (non-EGR)Idle to 5500 RPMCast Aluminum Port exit dimensions: 1.17" x 1.90"Recommended Intake Gasket For Apps without Heat cross over use JEGS p/n 555-210002Recommended Intake Gasket For Apps with Heat cross over use JEGS p/n 555-210004Estimated runner length - Shortest: 4.00"Estimated runner length - Longest: 7.00"Manifold height: (A) 4.29", (B) 5.31"Click here to determine carburetor pad height.Also Fits 1987-Up stock aluminum heads (does not fit 1987-Up cast iron or Chevrolet Bow Tie heads)Accepts late model choke, water neck, AC, alternator, and HEINo provision for divorced or heated chokeStock/stamped steel valve covers may require 3/16" (or thicker) valve cover gaskets. We recommend: 555-21100, 555-210075 or 555-210070 for adequate runner clearance.JEGS Carb Recommendations/NotesCarburetors 570 CFM670 CFM770 CFMUp to 300 HP300 to 400 HP400 to 500 HPManual Choke510-0-81570*510-0-81670*510-0-81770*Electric Choke510-0-80570*510-0-80670*510-0-80770** Square Flange Carburetors Require Adapter Plate 555-15442Carburetor Studs555-158401-1/2" StudsSuggested for carb and gasket only555-158412" StudsSuggested for carb and 1/2" spacer555-158422-1/2" StudsSuggested for carb and 1" spacer555-158463-1/2" Studs...

  • Brand: JEGS
  • ASIN: B078WHX3L4
  • UPC: 889944054580

Assault Racing Products PC3001 Big Block Chevy Dual Plane Oval Port Satin Aluminum Intake Idle-6000 RPM BBC

Assault Racing Products PC3001 Big Block Chevy Dual

This is a new satin aluminum dual plane intake for big block Chevy engines. For use with '65-'00 396, 402, 427, and 454s with general duty oval port heads. Does not fit tall deck blocks. 180⪚ design for power off-idle to 6000 RPM. May be used with OEM or aftermarket carburetors, has dual pattern for spread bore Quadrajet or square bore Holley style carbs. Includes adapter plate when running square bores. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. Includes provision for exhaust heated choke. Not EGR equipped. Does not fit under stock Corvette hoods. This intake is perfect for everyday drivers to medium performance street applications. They are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as 4 corner water outlet ports, nitrous/injector bosses, and the best part - the price! This is a stock replacement/street legal part for 396, 402, 427, and 454 V8s with OEM 4-bbl carb; 1965-â€TM72 (1973 non-CA) passenger cars and 1966-â€TM83 trucks, Suburbans, and heavy vehicles except stock equipped EGR. Manifold Specifications: Part Number: PC3001 RPM Range: Idle - 6000 Intake Port Dimensions: 2.05" x 1.82" Manifold Height: 5.75" Features: Satin Finis...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75EBOG

JEGS Performance Products 513003 JEGS Intake Manifold 1955-86 Small Block Chevy

JEGS Performance Products 513003 JEGS Intake Manifold 1955-86

Intake Manifold1955-1986 Small Block Chevy 265-283-302-327-350-400Square Bore (non-EGR)Idle to 5500 RPMBlack Aluminum Port exit dimensions: 1.17" x 1.90"Recommended Intake Gasket For Apps without Heat cross over use JEGS p/n 555-210002Recommended Intake Gasket For Apps with Heat cross over use JEGS p/n 555-210004Estimated runner length - Shortest: 4.00"Estimated runner length - Longest: 7.00"Manifold height: (A) 4.29", (B) 5.31"Click here to determine carburetor pad height.Also Fits 1987-Up stock aluminum heads (does not fit 1987-Up cast iron or Chevrolet Bow Tie heads)Accepts late model choke, water neck, AC, alternator, and HEINo provision for divorced or heated chokeStock/stamped steel valve covers may require 3/16" (or thicker) valve cover gaskets. We recommend: 555-21100, 555-210075 or 555-210070 for adequate runner clearance.JEGS Carb Recommendations/NotesCarburetors 570 CFM670 CFM770 CFMUp to 300 HP300 to 400 HP400 to 500 HPManual Choke510-0-81570*510-0-81670*510-0-81770*Electric Choke510-0-80570*510-0-80670*510-0-80770** Square Flange Carburetors Require Adapter Plate 555-15442Carburetor Studs555-158401-1/2" StudsSuggested for carb and gasket only555-158412" StudsSuggested for carb and 1/2" spacer555-158422-1/2" StudsSuggested for carb and 1" spacer555-158463-1/2" Studs...

  • Brand: JEGS
  • ASIN: B06X3W1FSB
  • UPC: 889944054610

Moroso 38400 Intake Bolt for Small Block Chevy

Moroso 38400 Intake Bolt for Small Block

INT.MANIF.BOLT SET CHEV

  • Brand: Moroso
  • ASIN: B000COU1VC
  • UPC: 084663384004

Assault Racing Products PC4000 for Small Block Ford Dual Plane Polished Aluminum Intake 1500-6500 RPM SBF 260 289 302

Assault Racing Products PC4000 for Small Block Ford

This is a new polished aluminum dual plane intake for small block Ford 260, 289, and 302 engines. Fits '83 and later 5.0L H.O. Mustangs and will work with cruise control. 180° medium high rise design for big power over a wide RPM range while retaining good throttle response at any speed, ideal for everyday to high performance street applications. For use with square bore style carbs. No provision for exhaust heated choke. Not EGR equipped. Does not fit 255, Boss 302, or 351W engines. Aftermarket carburetors may not be compatible with AOD trans. These intakes are produced from steel molds to reduce core shift, have all the major features you would expect on the expensive ones such as bridged rear water passages and nitrous/injector bosses, and the best part - the price! Manifold Specifications: Part Number: PC4000 RPM Range: 1500 - 6500 Intake Port Dimensions: 1.87" x 1.06" Manifold Height: 4.12" Features: Polished Finish 180° dual plane medium rise design for outstanding power from 1500 to 6500 RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - steel mold cast to reduce core shift Bridged rear water crossover passage to equalize flow and h...

  • Color: Polished
  • Brand: Assault Racing Products
  • ASIN: B00S75GUBI

Assault Racing Products PC2031 Small Block Chevy Single Plane High Rise Satin Aluminum Intake 3000-7500+ RPM SBC

Assault Racing Products PC2031 Small Block Chevy Single

This is a new satin aluminum high rise single plane intake for small block Chevy. Big power for mid to upper RPM ranges! Ideal for high performance and race applications. These intakes are produced from steel molds to reduce core shift, have all the major features found on the expensive ones such as 4 corner water outlets and nitrous bosses, and the best part - the price! Intake works with 283-400 small blocks up to 1995. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover. Not EGR equipped. Manifold Specifications: Part Number: PC2031 RPM Range: 3000 - 7500+ Intake Port Dimensions: 1.80" x 1.11"*1 Manifold Height: 6.06" NOTE (1) - port is intentionally left small to allow for porting/gasket matching Features: Satin Finish 360° single plane high rise design for outstanding power from 3000 to 7500+ RPM Cast-in bosses on intake runners, can be drilled and tapped for use with nitrous injectors Square bore carb bolt pattern for the Holley 4150/4160 style carburetor Ideal port position - allows custom porting for maximum power Dual distributor hold-down provisions for extra protection against distributor rot...

  • Color: Satin
  • Brand: Assault Racing Products
  • ASIN: B00S75GIP6

JEGS 513020 Intake Manifold

JEGS 513020 Intake

Intake ManifoldSmall Block Ford 289/302 (except Boss)Square Bore (non-EGR)Idle to 6000 RPMCast Aluminum Port exit dimensions: 1.03" x 1.81"Recommended Intake Gasket: JEGS p/n 555-210200Estimated runner length - Shortest: 5.00"Estimated runner length - Longest: 7.00"Manifold height: (A) 3.96", (B) 4.85"Click here to determine carburetor pad height.Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with JEGS Throttle Cable Bracket & Springs p/n 555-157050Will not fit 255ci enginesNo provision for divorced or heated chokeStock/stamped steel valve covers may require 3/16" (or thicker) valve cover gaskets. We recommend: 555-21120 or 555-210270 for adequate runner clearance.JEGS Carb Recommendations/NotesCarburetors 570 CFM670 CFM770 CFMUp to 300 HP300 to 400 HP400 to 500 HPManual Choke510-0-81570510-0-81670510-0-81770Electric Choke510-0-80570510-0-80670510-0-80770Carburetor Studs555-158401-1/2" StudsSuggested for carb and gasket only555-158412" StudsSuggested for carb and 1/2" spacer555-158422-1/2" StudsSuggested for carb and 1" spacer555-158463-1/2" StudsSuggested for carb and 2" spacerCarburetor Base Gaskets555-16100Open555-161054-HoleIntake Manifold Bolts555-83210Ford 289-351WCarburetor Fuel Inlet Lines & FittingsCarburetor SpacersFu...

  • Brand: JEGS
  • ASIN: B078WHVXS2
  • UPC: 889944054702

Docooler® Aluminum Alloy Vacuum Manifold Kits 6 Port 1/8 NPT Turbo Wastegate Boost Block Intake Manifold Universal Modification Accessory

Docooler® Aluminum Alloy Vacuum Manifold Kits 6 Port

Great to tie in Boost Controllers, Gauges and any components that require a separate vacuum source. You can also use them for fuel and oil requirements with tape. Billet vacuum manifold kit is a great add-on for tuner that require additional vacuum sources. It has 6 ports, and also comes with plug if tuner don't require that many ports. This will ease up all the trouble for splitting up lines and making extra ports if needed.Features:Made of high quality aluminum alloy.The surface is anodized for a long lasting, brilliant finish.Includes six 1/8" vacuum ports.Includes two 3/8" inlet-outlet fittings.With 4 block-off plugs.With 1 inlet-outlet block-off plug.With mounting hardware.A perfect modification accessory.Specifications:Material: aluminum alloyColor: black, red, blue (optional)Size: check on our picturesFitment: universal (please check the installation size before buying)Package Size: 21 * 17 * 3cm / 8.3 * 6.7 * 1.2inPackage Weight: 364g / 13ozPackage list:1 * Vacuum Manifold Kits

  • Brand: Docooler
  • ASIN: B01F8KW96Y
  • UPC: 718760112832

BBC Intake Manifold Bolt Kit Big Block Chevy Set of 16 pc Bolts 551664

BBC Intake Manifold Bolt Kit Big Block Chevy

Stock photo Set of 16 BBC intake manifold Bolts Flange, Clear Zinc Coated Bolts

  • Color: Natural
  • Brand: ICT Billet
  • ASIN: B00NY4U4DC
  • UPC: 656729842423

Mr. Gasket 6091 Intake Manifold Bolt

Mr. Gasket 6091 Intake Manifold

Mr. Gasket Intake Manifold Bolts have a smaller-than-standard 12-point head and incorporate extra-thick flat washers for uniform clamping pressure. Designed specifically for small-block Chevys and ideal for tight spaces, these 1.00-inch long 3/8-16 fasteners are heat-treated to Grade 8 specs, perfect for runnered race manifolds, zinc-plated for corrosion resistance, and come in a set of 12.

  • Color: Silver
  • Brand: Mr. Gasket
  • ASIN: B000BW8W2A
  • UPC: 084041060919

350 Chevy SBC Intake Manifold Flange Bolt Set Kit LT1 5.7L Small Block V8 551653

350 Chevy SBC Intake Manifold Flange Bolt Set

Set of 12 Small Block Chevy Intake Manifold Bolts Fits:    SBC engines up to 97 (including LT1)

  • Color: Natural
  • Brand: ICT Billet
  • ASIN: B01FG6E2GA
  • UPC: 682384790335

ALLOYBOLTZ - SMALL BLOCK CHEVY SBC 265 283 305 307 327 350 400 STAINLESS ENGINE HEX BOLT KIT

ALLOYBOLTZ - SMALL BLOCK CHEVY SBC 265 283

Give Your Small Block Chevy Engine a new look with our 205 Piece Stainless Steel Hex Bolt kit!! Our special intake washers are 1/8 thick. The bolts in this kit are made from 304 stainless steel. This Bolt Kit Fits All 265, 283, 302, 305, 307, 327, 350 , and 400 Chevy Engines.(Non-EFI). This is a complete high quality stainless steel hex bolt kit. The kit includes individually packaged and labeled component kits for the following items: Intake Manifold- Timing Cover- Water Pump- Oil Pan- Thermostat Housing- Distributor- Coil Bracket- Fuel Pump- Valve Covers- Headers- Crank Pulley- Fan Pulley - Carb Stud Kit The carb stud kit fits Carter, Edelbrock, or Holley Carbs. The studs have an internal hex used to install them in your intake manifold. If you are using a Quadrajet carb, just let us know with your payment and we will include a mounting bolt kit for you! Header Bolts (3/8-16 x 1 Allen Bolts) And Our Special Small OD Header Washers Are Included With Each Kit! These extra thick washers are designed to Clear Large Tube Headers.

  • Brand: Alloyboltz
  • ASIN: B073WPDQPY

Speedmaster PCE147.1025 Shootout +Plus Vortec High Rise Intake Manifold

Speedmaster PCE147.1025 Shootout +Plus Vortec High Rise Intake

Shootout +Plus Vortec High Rise Intake Manifold 1996-Later Small Block Chevy 350Height: 6.060"Non-EGRRPM Range: 3000-7500Satin Finish

  • Brand: Speedmaster
  • ASIN: B00SYF7H8G
  • UPC: 012933011046

Docooler® Aluminum Alloy Vacuum Manifold Kits 6 Port 1/8 NPT Turbo Wastegate Boost Block Intake Manifold Universal Modification Accessory

Docooler® Aluminum Alloy Vacuum Manifold Kits 6 Port

  • Brand: Docooler
  • ASIN: B01F8KW5X6
  • UPC: 718760110654

SBC Chevy Fel Pro 1205 Intake Manifold Gasket 327 350 400 Performance (Stock/Small Race Port)

SBC Chevy Fel Pro 1205 Intake Manifold Gasket

This Listing is for a new pair of # P1205 intake gaskets as shown compatible with small block Chevy Fel-Pro BULK . Not skin packed. Gaskets Only! For '55-'00 262-400 engines. Famous Fel-Pro quality, great for stock to high performance rebuilds. Printoseal design with elastomer beads around the ports for extra sealing. Gaskets are .060" Thick and Port hole size 1.28" x 2.09" with no exhaust crossover.

  • Brand: Falcon Performance
  • ASIN: B01N29P51R
Similar Block Intake Manifold Results
Block Intake Manifold Video Results

How to Install an Intake Manifold - Roadkill Extra

Block Intake Manifold

It’s official: the “How to Build Your First Engine Series” is over! This is the final episode, as David Freiburger and Steve Dulcich wrap up their engine project for Roadkill Garage’s Vanishing Paint 1970 Dodge Challenger by installing the intake manifold and giving you plenty of advice as they g...

  • Likes: 3729
  • View count: 301148
  • Dislikes: 137
  • Comments:
Tags: How to Build Your First Engine Series,engine project,installing the intake manifold,tech advice,M...

Speedway Tech Talk - Tips for Selecting an Intake Manifold

Block Intake Manifold

Speedway 1957-86 Small Block Chevy Hi-Rise Intake Manifolds (91011465) http://bit.ly/29FtSiz World Products 061040 S/B Chevy Motown Single Plane Intake Manifold (82461040) http://bit.ly/29Lpnma

  • Likes: 357
  • View count: 88432
  • Dislikes: 20
  • Comments:
Tags:

Engine Building Part 12 - Installing an Edelbrock Performer Dual Plane Intake Manifold SBC 350

Block Intake Manifold

Intake manifold installation. Edelbrock Performer dual plane. automotive engines diagnosis repair rebuilding automotive engines diagnosis repair rebuilding pdf best book for rebuilding engines books on how to build engines books on rebuilding car engines books on rebuilding engines chevy pe...

  • Likes: 499
  • View count: 50017
  • Dislikes: 24
  • Comments:
Tags: installing an intake manifold,edelbrock performer dual plane intake manifold,engine building,350 ...

Intake manifold Gasket replacement No Oil Leaks by Scared Shiftless

Block Intake Manifold

How to install an intake manifold gasket with no leaks on small block and big block Chevrolet. Tips you need to know! Replacing a intake manifold gasket made easy by Mark with Scared Shiftless. 1957 Chevrolet two door post Sponsored by www.papadent.com Multi Purpose hand held tool for PDR, Stain...

  • Likes: 895
  • View count: 212052
  • Dislikes: 44
  • Comments:
Tags: Check,out,the,Papa,Dent,tool,for,Paint,less,dent,removal,and,stainless,trim,repair.,350,283,265,4...

Classic How to 289 302 351 Windsor Ford Intake Manifold Install Episode 303 Autorestomod

Block Intake Manifold

Get the best install of your Ford 289, 302 intake manifold using our tips and tricks. Use RTV instead of the gasket incaps. Replacing the Intake is easy with these tips. http://www.autorestomod.com/ http://www.youtube.com/autorestomod Thanks for watching! Jeff Ford Contact: [email protected]

  • Likes: 279
  • View count: 31845
  • Dislikes: 15
  • Comments:
Tags: restoration,modification,How,to,How-to,resto,mod. auto,mod,autorestomod,fix,Intake,Manifold,260,2...