G Thread (BSP) to NPT (US Thread) Pipe Fitting Adapter with G Thread Bonded Washer Seal Included 1/2" MG x 1/2" FNPT 2 Pieces

G Thread (BSP) to NPT (US Thread) Pipe

This brass adapter is required to convert G (BSP / BSPP) to NPT. The G (BSP / BSPP) standard is used in Europe and around the world. Although the threads look incredibly similar, they are not compatible. The NPT (US Standard) thread is tapered with a 60 deg thread pitch and designed to seal when the threads compress together, with pipe tape to fill in any minor leak paths. G (BSP / BSPP) thread is parallel with a 55 deg thread pitch and designed to seal with a Bonded washer seal (included with our fittings) or an O-ring face that may be machined into your fixture. If your fixture has a machined O-ring face you can dispose of the included seal and just use the adapter. If your fixture does not have a machined groove with an O-ring you will need to use the included seal. The seal fits very tightly over the male end of the G (BSP / BSPP) connection and a water tight seal is formed when they are screwed together. This is like a US garden hose which has the seal the inside of the connection, G fittings use the seal on the outside and have some type a metal ring or machine face to prevent the seal from blowing out.

  • Brand: Kinetic Wares
  • ASIN: B07Q6ST1JN

1/2" G Thread (BSP) Female to 1/2" NPT Male Connector, Brass BSP to NPT Adapter 1/2 Inch, Industrial Metal Brass G Thread to Pipe Fittings Connect (2 Pack)

1/2" G Thread (BSP) Female to 1/2" NPT

The brass garden hose fitting is a 1/2" G Thread (BSP) Female to 1/2" NPT Male adapter (also called connector) and is suitable for connecting pipes, hoses, or fittings with different end types and diameters. The fitting is made of brass for durability and resistance to corrosion. It has female G threads (BSP / British Standard Pipe) on one end and male National Pipe Taper (NPT) threads on the other for connecting to a male and a female threaded pipe, hose, or fitting. The NPT threads create a tighter seal than straight threads. This brass pipe fitting is suitable for adapting hoses and pipes of different sizes in a wide range of applications. Specifications:Type: 1/2" G Female to 1/2" NPT Male Material: Brass Package Includes:2*Brass Adapters About SUMMERY LIFESUMMERY LIFE - ENJOY SUMMERY LIFE

  • Brand: summery life
  • ASIN: B07QXSTFQY
  • UPC: 745679697433

BOWSEN Pipe Fitting Adapter Female G1/2" Thread to Male NPT1/2" Thread Lead Free (2-Pcs)

BOWSEN Pipe Fitting Adapter Female G1/2" Thread to

This water connection fittings for ease of use. Which can convert G thread connector to NPT connector It is made of Brass, with threads that are manufactured to the highest quality standards. Choosing this adapter ensures that you've chosen a high quality item for your project. It is easy to install for both homeowners and contractors. Package: 1x G 1/2" to NPT 1/2" Adapter

  • Brand: BOWSEN
  • ASIN: B01IJ9HI6M
  • UPC: 766008969359

G Thread (Metric BSP) Female to NPT Thread Male Pipe Fitting Adapter - Lead-Free (Two 1/2 inch)

G Thread (Metric BSP) Female to NPT Thread

This water connection fittings for ease of use. Which can convert G thread connector to NPT connector It is made of durable Carbon steel, with threads that are manufactured to the highest quality standards. Choosing this adapter ensures that you've chosen a high quality item for your project. It is easy to install for both homeowners and contractors. Package: 2 piece of 1/2" FG to 1/2" MNPT Adapters  

  • Brand: Cascada Showers
  • ASIN: B07JPM2D13
  • UPC: 713289032753

Uxcell a15012200ux0336 G 1/4-19 BSP 55 Degree Pipe Thread HSS Tap 4 Straight Flutes

Uxcell a15012200ux0336 G 1/4-19 BSP 55 Degree Pipe

Feed according to the pitch, need high torque.Four Straight Flutes. BSP 55 degree pipe thread tap. Number of Flutes : 4 ; Square Head Size : 9 x 9mm/ 0.35" x 0.35" (L*W)

  • Brand: uxcell
  • ASIN: B00VGDTF5G

G Thread (Metric BSP) Male to NPT Thread Female Pipe Fitting Adapter - Lead-Free Adapter (Two 1/2 inch)

G Thread (Metric BSP) Male to NPT Thread

This water connection fittings for ease of use. Which can convert G thread connector to NPT connector It is made of durable Carbon steel, with threads that are manufactured to the highest quality standards. Choosing this adapter ensures that you've chosen a high quality item for your project. It is easy to install for both homeowners and contractors. Package: 2 Pcs of 1/2" MG to 1/2" FNPT  Adapter

  • Brand: Cascada Showers
  • ASIN: B07K1DQWYV
  • UPC: 713289032661

1/2 Male to 12mm Hose Barb BSP Male Thread Straight Barbed Brass Connector Joint Copper Pipe Fitting Coupler Adapter

1/2 Male to 12mm Hose Barb BSP Male

Package list: 1 x Brass Ball Valve

  • Color: Yellow
  • Brand: Hicello
  • ASIN: B07C7DX1CT
  • UPC: 653334422705

1/2" BSP European Thread Pipe Connection Elbow Female X Female Screwed Fittings

1/2" BSP European Thread Pipe Connection Elbow Female

Brass threaded BSP pipe fittings are being used to join pipes for water and heating systems. These fittings are top quality chrome plated brass connectors.

  • ASIN: B0084UOO64

1/2x3/8 BSP M/F Thread Hex Reducer Bushing Pipe Fitting Connector 2pcs

1/2x3/8 BSP M/F Thread Hex Reducer Bushing Pipe

1/2 BSP Male to 3/8 BSP Female Hex Thread Bushing Piping Connector Adapter.Bronze durable hex hub, connect the hose to the copper pipe, brass and iron to connect. Can the industry and a household or water pipes, garden tools, women men easily change the toilet. Easy to install and run the wire.

  • Brand: uxcell
  • ASIN: B018503BIY
  • UPC: 712662563624

uxcell 5 Pcs 1/4"BSP Male x 1/8"BSP Female Thread Brass Hex Bushing Pipe Fitting Adapter

uxcell 5 Pcs 1/4"BSP Male x 1/8"BSP Female

Brass hex bushing is durable for connecting pipe, fit for copper, brass, iron pipe fitting.It can be used for industrial or home, such as garden pipe, kitchen pipe, hydraulic equipment, water service, etc, connect two different pipe surface.

  • Brand: uxcell
  • ASIN: B00G99JS18

1 Bsp Pipe Thread Extension Female x Male Cast Iron Brass - 10mm Long by Ravani

1 Bsp Pipe Thread Extension Female x Male

Extension socket with 1" BSP thread to allow you to extend any fitting in height, giving more room for any clearance issues, same thread for both internal and external side. Specifications: - Length: 10mm; - Material: cast iron brass; - Max. pressure: 1.0 MPa (10 bar); - Max. temperature: +100°C; - Size: 1" BSP.

  • Brand: Ravani
  • ASIN: B01C41BMBS
  • UPC: 642415254588

Maslin 5pcs 1/8" 1/4" 3/8" 1/2" BSP Male Thread Metal Internal Hex Head Socket Pipe Plugs Hexagonal Pipe Fittings - (Thread Specification: 1/8")

Maslin 5pcs 1/8" 1/4" 3/8" 1/2" BSP Male

Product Name | Hex Head Pipe Plug Color | Silver Tone Material | Metal Male Thread Size | 1/4" BSP Height | 9mm/ 0.3" Hex Side to Side Diatance | 7mm/ 0.3" Net Weight | 34g We have type:1/8"  1/4"  3/8"   1/2" Choose the right one you need.Quantity: 5pcswindow.adminAccountId=119229019.Item specifics:Technics: CastingMaterial: IronHead code: HexagonShape: EqualType: CapModel number: 1/8" 1/4" 3/8" 1/2"Hose inner diameter: 7mmConnection: Male

  • Brand: Maslin
  • ASIN: B07PRK89F5
  • UPC: 736865349199

Uxcell a15080700ux0569 Flexible Oil Coolant Pipe Hose 1/4BSP Thread w Magnetic Base 35cm Long

Uxcell a15080700ux0569 Flexible Oil Coolant Pipe Hose 1/4BSP

Coolant Pipe used for lathe, milling, CNC machine, hydraulic machinery and water cooling system, flexible body make it easy to change the direction and angle to meet your need. Made of plastic material, it features non-toxic, resistance to corrosion and tension, flexible, and long service life.

  • Color: Blue
  • Brand: uxcell
  • ASIN: B01ABN9DJY
  • UPC: 712662813194

uxcell 5 Pcs 1/4BSP Male Thread Brass Hex Head Pipe Plug Connector Fitting

uxcell 5 Pcs 1/4BSP Male Thread Brass Hex

1. Made of brass material, corrosion resistant.2. Designed with hex head.3. 1/4BSP male thread diameter.4. Good performance in blocking.5. This plug is great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.Specification:Product Name: Hex Head Pipe PlugMaterial: BrassMain Color: Brass ToneWeight: 42gThread Diameter: 1/4BSPHexagon Head Width: 13mm / 0.52-inchHeight: 12mm / 0.48-inchPackage Content: 5pcs x Hex Head Pipe Plug

  • Brand: uxcell
  • ASIN: B071JNR5W4

Joywayus 1/2" NPT Thread Female × 1/2" G Thread Male Brass Pipe Fitting Adapter

Joywayus 1/2" NPT Thread Female × 1/2" G

1/2" NPT Thread Pipe fittings female Thread Water Pipe to 1/2" G male Adapter."G thread male" means that the male part of the adapter is G thread.

  • Brand: Joywayus
  • ASIN: B07RZYNGV9

Hanson 1911ZR Tap 1/8"-28Bsp Pipe", for Tap Die Extraction

Hanson 1911ZR Tap 1/8"-28Bsp Pipe", for Tap Die

These IRWIN HANSON Pipe Taper Taps cut internal threads in pipes. Each taper tap is great for pipe fittings and is tapered at a rate of 3/4 inches per foot.

  • Brand: Lenox Tools
  • ASIN: B00176ON7W
  • UPC: 024721019110

Metalwork 304 Stainless Steel Pipe Fitting,Converter Adapter, G 1/4" Female Thread to 1/4" NPT Male (2 Pcs)

Metalwork 304 Stainless Steel Pipe Fitting,Converter Adapter, G

Material: 304 Stainless steel Size:1/4" x 1/4"

  • Color: 2 Pcs
  • Brand: Metalwork
  • ASIN: B07DN2L5T3

1/2" BSP Female to NPT Male Thread Adaptor UK Thread to American

1/2" BSP Female to NPT Male Thread Adaptor

BSP thread 1/2" female to NPT thread 1/2" male - pipe fitting adapter which will let you convert the BSP(UK) or G (European) thread to NPT American standard thread. You would need to just screw this adpator to existing male thread and you will end up with NPT standard thread. Product is made from brass. - 1/2" thread size; - BSP female thread on one and and NPT male thread on the other end; - Made from brass;

  • Brand: plumbing4home
  • ASIN: B074KGV1JB
  • UPC: 642896613607

Legines Brass Adapter, 1/4" NPT Female x 1/8" NPT Male Pipe Fitting (Pack of 2)

Legines Brass Adapter, 1/4" NPT Female x 1/8"

The adapter pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting. The NPT threads create a tighter seal than straight threads. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The operating temperatures for this fitting range are from -53 to 121 degrees C (-65 to 250 degrees F). Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Specification: -Maximum working pressure: Operating pressure UP to 1200psi -Net Weight:68.4g -item weight:83.4g -Item Shape: Adapter -Material: Brass -Measurement ...

  • Brand: Legines
  • ASIN: B07485PJHM

3/4 inch BSP Thread Brass Pipe Screw Hex Male Blanking Plug Tube End Cap by Invena

3/4 inch BSP Thread Brass Pipe Screw Hex

Threaded male blanking cap. Mainly used in central heating installations. Designed for use with brass, copper or iron pipe.

  • ASIN: B00R2ZYJ12

Uxcell a15012200ux0346 G 3/8-19 BSP 55 Degree Pipe Thread HSS Tap 4 Straight Flutes

Uxcell a15012200ux0346 G 3/8-19 BSP 55 Degree Pipe

Feed according to the pitch, need high torque.Four Straight Flutes. BSP 55 degree pipe thread tap. Square Head Size : 11 x 11mm/ 0.43" x 0.43" (L*W)

  • Brand: uxcell
  • ASIN: B00VGDT6XW

Ball Valve Dual-direction Water Valve DN15 1/2-Inch BSP Male and Female Thread Brass Pipe Valve with Lever Handle

Ball Valve Dual-direction Water Valve DN15 1/2-Inch BSP

Description: This 1/2 inch Ball Valve is made of high quality brass. Ball valve's ease of operation, maintenance, and versatility lend it to extensive industrial use and home use. Handle lies flat in alignment with the flow when open and perpendicular when closed for easy visual confirmation of valve's status, easy to use.  Specification: Material: Brass Type: Male and female thread  Nominal Diameter: DN15 (1/2inchBSP) Suitable Fluid: Water Pressure: Normal pressure Temperature: Normal temperature Flow Direction: Dual-direction Weight: 129g / 4.6oz (approx.) Package list: 1 × Ball Valve

  • Brand: Wal front
  • ASIN: B07MKV4T8B
  • UPC: 736077956772

LALICORP 32mm Hose Barb x 1-1/4" Male BSP Thread Brass Barbed Pipe Fitting Coupler Connector Adapter For Fuel Gas Water HIGHT QUALITY

LALICORP 32mm Hose Barb x 1-1/4" Male BSP

Description:Hose Barb: 32mmThread Size: 1.2"Inch BSPIncluded:1x Brass Fitting

  • Brand: LALICORP
  • ASIN: B07JJBPMWN
  • UPC: 689363381157

Joywayus 1/2" NPT Male Thread x 1/2" G Male Thread Brass Hex Nipple Fitting Connector Pipe Adapter

Joywayus 1/2" NPT Male Thread x 1/2" G

This Joywayus fitting are made of brass,brass for durability and resistance to corrosion.Hose fittings are used in systems such as air compressors,automatic manufacturing operations,aircraft controls,and tire installation in industries including Agriculture,mining,road construction,firefighting,and aviation.

  • Brand: Joywayus
  • ASIN: B07SBXX34C
Similar Bsp Pipe Threads Results
Bsp Pipe Threads Video Results

Distinguishing between BSP and NPT thread types in plastic pipe systems

Bsp Pipe Threads

A comparison of the differences between bsp and npt threads in industrial plastic pipe systems. https://www.plasticpipeshop.co.uk

  • Likes: 103
  • View count: 17872
  • Dislikes: 13
  • Comments:
Tags: plastic pipe,plastic pipe fittings,bsp,npt,tapered threads,parallel threads

How to Identify a Thread Type | NPT | PT | BSP | Trimantec

Bsp Pipe Threads

Learn how to identify any thread type in this short how-to video. Then, head over to our full Thread Identification blog to view size charts and download a PDF version. 👇 https://trimantec.com/thread-identification-guide/ So you finally found the right solenoid valve to replace your broken one....

  • Likes: 68
  • View count: 18526
  • Dislikes: 23
  • Comments:
Tags: tapered threads,parallel threads,Trimantec,Thread Type,thread types explained,thread identificati...

BSPP vs NPT

Bsp Pipe Threads

Customers routinley confuse the thread differences between NPT and BSPP. This video is to help give a bit of guidance.

  • Likes: 56
  • View count: 33303
  • Dislikes: 34
  • Comments:
Tags: BSPP,BSPP x NPT,BSPP Adapters,NPT adapters

NPT and BSP Threads

Bsp Pipe Threads

In this video, Bob talks through the difference between NPT and BSP threads. www.plasticpipeshop.co.uk

  • Likes: 3
  • View count: 235
  • Dislikes: 0
  • Comments:
Tags: plastic pipe,PVC pipe,NPT thread,BSP thread,differences

Working with NPT Fittings in Homebuilt Aircraft

Bsp Pipe Threads

This short video describes the details of working with NPT fittings and pipes while plumbing brake and fuel systems in experimental aircraft.

  • Likes: 227
  • View count: 30287
  • Dislikes: 8
  • Comments:
Tags: Tip of the Week,HomebuiltHELP,NPT,fuel system,homebuilt aircraft,experimental aircraft