SBPFL202-10 Flanged Mounted Bearing, 2 Bolt, 5/8" Inside Diameter, Set screw Lock, Steel, Inch

SBPFL202-10 Flanged Mounted Bearing, 2 Bolt, 5/8" Inside

The SBPFL202-10 bearing has a pressed steel flange housing, two bolt holes, a 5/8" inside diameter, and chrome steel bearings. The bearing has a dynamic (radial) load rating of 9.55 kN and a static (axial) load rating of 4.8 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 1/4" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmen...

  • Brand: VXB
  • ASIN: B004YL2YYG

1 3/4 Bearing UCF209-28 + Square Flanged Cast Housing Mounted

1 3/4 Bearing UCF209-28 + Square Flanged Cast

UCF209-28 FYH Bearing Square Flanged Mounted Bearing Cylindrical bore (with set screws) 1 3/4" Inner Diameter This heavy duty four-bolt flange unit has a round cartridge on the backside of the flange which allows for precise mounting and alignment.Applications are Rotating drum, rotating roller and when precise mounting accuracy is required * Item: UCF209-28 Bearing * Type: Four Bolt Flanged Bearing * Bolt Size: 1/2" * Basic Load (Cr): 34.1 KN * Basic Load (Cor): 21.3 KN * Bearing No: UC209-28 * Quantity: One Bearing Dimensions (Inches) d L A J N A1 A2 A0 B S 5-13/32" 4-9/64" 55/64" 23/32" 1-1/2" 5/8" 2-1/16" 1-15/16" 3/4" 1/2"

  • Brand: FYH
  • ASIN: B004YL3NUA

SBPF205-16 Flanged Mounted Bearing, 3 Bolt, 1" Inside Diameter, Set screw Lock, Steel, Inch

SBPF205-16 Flanged Mounted Bearing, 3 Bolt, 1" Inside

The SBPF205-16 flange mounted bearing has a pressed steel flange housing, three bolt holes, a 1" inside diameter, and steel bearings. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires three 5/16" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from e...

  • Brand: VXB
  • ASIN: B0056JH3KU

3/4" Mounted Bearing UCF204-12 + Square Flanged Cast Housing

3/4" Mounted Bearing UCF204-12 + Square Flanged Cast

This UCF204-12 bearing has a cast iron flange housing, four bolt holes, and a 3/4" inside diameter. This ready-to-mount unit requires four 3/8" mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubri...

  • Brand: VXB
  • ASIN: B002BBKL28

SBPF204-12 Flanged Mounted Bearing, 3 Bolt, 3/4" Inside Diameter, Set screw Lock, Steel, Inch

SBPF204-12 Flanged Mounted Bearing, 3 Bolt, 3/4" Inside

The SBPF204-12 flange mounted bearing has a pressed steel flange housing, three bolt holes, a 3/4" inside diameter, and steel bearings. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires three 5/16" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing fr...

  • Brand: VXB
  • ASIN: B0056JH4H2

SBPF205-16 Flanged Mounted Bearing, 2 Bolt, 1" Inside Diameter, Set screw Lock, Steel, Inch

SBPF205-16 Flanged Mounted Bearing, 2 Bolt, 1" Inside

The SBPFL205-16 flange mounted bearing has a pressed steel flange housing, two bolt holes, a 1" inside diameter, and steel bearings. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 5/16" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from envi...

  • Brand: VXB
  • ASIN: B0056JH45Y

SBPFL204-12 Flanged Mounted Bearing, 2 Bolt, 3/4" Inside Diameter, Set screw Lock, Cast Iron, Inch

SBPFL204-12 Flanged Mounted Bearing, 2 Bolt, 3/4" Inside

The SBPFL204-12 flanged mounted bearing has a pressed steel flange housing, two bolt holes, a 3/4" inside diameter, and steel bearings. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 5/16" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from...

  • Brand: VXB
  • ASIN: B004YL2ZKY

2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

2 Pieces- 1 inch 4 Bolts Pillow Block

UCF205-16 Pillow Block Flange Bearing 1" Bore 4 Bolt Solid Base (2PCS)-Brand New-Free Shipping within the Continental United States-Same business day order processing before 12:30PM PDT-Satisfaction GuaranteedBore Size: 1 InchStatic Load Rating: 7.85 kN/1800 lbsDynamic Load Rating: 14 kN/3100 lbsMaterial: Cast IronMax RPM: 3400Quantity Per Order: 2 PiecesSelf Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.Style: 4 BoltsProduct Description: The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stati...

  • Brand: Jeremywell
  • ASIN: B01IWGK9NG

3/4" Mounted Bearing UCFL204-12 + 2 Bolts Flanged Cast Housing

3/4" Mounted Bearing UCFL204-12 + 2 Bolts Flanged

This UCFL204-12 bearing has a cast iron flange housing, two bolt holes, and a 3/4" inside diameter. This ready-to-mount unit requires two M10 mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrica...

  • Brand: VXB
  • ASIN: B002BBQC4O

1/2" Bearing UCF201-8 + Square Flanged Cast Housing Mounted Bearings

1/2" Bearing UCF201-8 + Square Flanged Cast Housing

This UCF201-8 bearing has a cast iron flange housing, four bolt holes, and a 1/2" inside diameter. This ready-to-mount unit requires four 3/8" mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubric...

  • Brand: VXB
  • ASIN: B002BBAXBC

uxcell KFL001 Flanged Pillow Block Bearing, 12mm Bore Diameter, Zinc Alloy/Chrome Steel, Set Screw Lock (Pack of 1)

uxcell KFL001 Flanged Pillow Block Bearing, 12mm Bore

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.2.Bearing housings are made of Zinc Alloy while bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.Specification:Bearing Unit No.: KFL001Bearing No.: K001Housing No.: FL001Housing Meterial: Zinc AlloyBearing Meterial: Chromium Steel (GCr15)Bore Diameter: 12mmBolt Hole Size: 7mm / 0.28 Inch (D)Holes Centre Distance: 48mm / 1.89 InchRecommend Mounting Bolt Size: M6Recommend Wrench Size: 1.5mmNumber of Pack: 1 Pcs

  • Brand: uxcell
  • ASIN: B07GWSXGQH

SBPF202-10 Flanged Mounted Bearing, 3 Bolt, 5/8" Inside Diameter, Set screw Lock, Steel, Inch

SBPF202-10 Flanged Mounted Bearing, 3 Bolt, 5/8" Inside

The SBPF202-10 flanged mounted bearing has a pressed steel flange housing, three bolt holes, a 5/8" inside diameter, and chrome steel bearings. The bearing has a dynamic (radial) load rating of 9.55 kN and a static (axial) load rating of 4.8 kN. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires three 1/4" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bear...

  • Brand: VXB
  • ASIN: B004YL3GFM

1" Mounted Bearing UCFL205-16 + 2 Bolts Flanged Cast Housing

1" Mounted Bearing UCFL205-16 + 2 Bolts Flanged

This UCFL205-16 bearing has a cast iron flange housing, two bolt holes, and a 1" inside diameter. This ready-to-mount unit requires two M10 mounting bolts (sold separately).It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment that has moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubricat...

  • Brand: VXB
  • ASIN: B002BBJ0Y8

Eowpower 4Pcs 8mm Bore Diameter Flanged Ball Mounted Pillow Block Insert Bearing

Eowpower 4Pcs 8mm Bore Diameter Flanged Ball Mounted

Bearing Size: Total Size(Approx):48 X 27 X 12mm / 1.9" x 1.06" X 0.47" (L*W*H) Hole Inner Diameter:8mm / 0.31" Mounting Hole Diameter: 5mm/0.2" Mounting Hole Distance: 37mm/1.46"

  • Color: Silver
  • Brand: Eowpower
  • ASIN: B07K6B8M4P

Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Collar, Narrow Inner Race, Cast Iron Housing, 3/4" Bore, 1.283" Length Through Bore, 3.531" Mounting Hole Spacing

Hub City FB260URX3/4 Flange Block Mounted Bearing, 2

This Hub City FB260UR series flange block has a cast iron housing with two bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and dampens vibration and its two bolt holes provide mounting stability. A collar extends from the bearing inside ring to lock the collar and bearing onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. The steel single-row, deep groove ball bearing insert is self-aligning and accommodates misalignments between the shaft and the housing. A pressed steel cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Nitrile rubber seals with steel guards on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing secur...

  • Brand: Hub City
  • ASIN: B00ECZTDK2
  • UPC: 662798256894

35mm Mounted Bearing UCF207 + Square Flanged Cast Housing

35mm Mounted Bearing UCF207 + Square Flanged Cast

This UCF207 bearing has a cast iron flange housing, four bolt holes, and a 35mm inside diameter. This ready-to-mount unit requires four M12 mounting bolts (sold separately).It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 25.7 kN and a static (axial) load rating of 15.4 kN. The unit is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment that has moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubric...

  • Brand: VXB
  • ASIN: B002BBJ138

1-1/4" Bearing UCF207-20 + Square Flanged Cast Housing Mounted

1-1/4" Bearing UCF207-20 + Square Flanged Cast Housing

This UCF207-20 bearing has a cast iron flange housing, four bolt holes, and a 1-1/4" inside diameter. This ready-to-mount unit requires four 3/8" mounting bolts (sold separately). It has chrome steel bearings and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 25.7 kN and a static (axial) load rating of 15.4 kN. The unit is secured to the shaft with set screws to prevent slippage This bearing is most commonly used in mechanical equipment that has moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain ...

  • Brand: VXB
  • ASIN: B002BBH71Q

VXB Brand 1 7/8" Bearing UCF210-30 Square Flanged Housing Mounted Bearings Type: Flange Mounted Bearing Bolt Size: 9/16" inch Shaft Diameter: 1 7/8" inch

VXB Brand 1 7/8" Bearing UCF210-30 Square Flanged

VXB Brand, UCF210-30 Four Bolt Flange UnitSet Screw Type1 7/8" inch Inner Diameter UCF210-30 Four Bolt Flange Unit, bearing is Set Screw Type, Inner Diameter is 1 7/8" inch. Item: UCF210-30 Ball Bearing Type: Flange Mounted Bearing Bolt Size: 9/16" inch Shaft Diameter: 1 7/8" inch Basic Load (Cr): 35140 N Basic Load (Cor): 23086 N Bearing No: UC210-30 Housing No: F210 Quantity: One Bearing Dimensions (inch) a e i g l s z Bi 5-5/8" 4-3/8" 55/64" 23/32" 1-9/16" 19/32" 2.150" 2.031" 1 7/8" Bearing UCF210-30 + Square Flanged Housing Mounted BearingsUCF210-30

  • Brand: VXB
  • ASIN: B06XCL4L6X

Four (4) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock - P205

Four (4) UCP205-16 Cast Iron Pillow Block Mounted

The UCP205-16 pillow block mounted bearing with a 1" inside diameter, two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has a cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 3/8" bolts (sold separately). This mounted bearing is used in industrial manufacturing, food and beverage manufacturing, and in the textile industry. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and m...

  • Brand: BC Precision
  • ASIN: B07D9PP293
  • UPC: 688938502683

SKF F2B 008-RM Ball Bearing Flange Unit, 2 Bolts, Set Screw Locking, Regreasable, Contact Seal, Cast Iron, 1/2" Bore, 3" Bolt Hole Spacing, 2150lbf Dynamic Load Capacity

SKF F2B 008-RM Ball Bearing Flange Unit, 2

This SKF F2B-RM series flange unit has a cast iron housing with two bolt holes, contact seals, and a set screw lock for applications where the direction of rotation is constant. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and dampens vibration and its two bolt holes provide mounting stability. The steel single-row, deep groove ball bearing insert is self-aligning and accommodates misalignments between the shaft and the housing. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Contact seals on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment.

  • Brand: SKF
  • ASIN: B07G5TFZT2

FYH Bearing SBPFL201-8 1/2" Pressed Steel Oval Two Bolt Flanged Mounted

FYH Bearing SBPFL201-8 1/2" Pressed Steel Oval Two

This FYH SBPFL201-8 flange mounted bearing has a pressed steel flange housing, two bolt holes, a 1/2" inside diameter, and steel bearings. The housing requires two 1/4" mounting bolts (sold separately). The bearing has a dynamic (radial) load rating of 9.55 kN and a static (axial) load rating of 4.8 kN. The bearing is secured to the shaft with set screws to prevent slippage. This bearing is most commonly used in mechanical equipment with moderate loads and shaft speeds and where the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmenta...

  • Brand: VXB
  • ASIN: B002TIIASU

uxcell UCFL204 Flanged Pillow Block Bearing, 20mm Bore Diameter, Cast Iron/Chrome Steel, Set Screw Lock (Pack of 1)

uxcell UCFL204 Flanged Pillow Block Bearing, 20mm Bore

1.A pillow block contains a housing and an double sealed insert self-alignment bearing that avoid any misalignment.2.Bearing housings are made of Cast Iron while bearings are made of Chromium Steel (GCr15), giving them low friction, vibration and noise.3.Pillow block Bearings have two bolt holes for installation. It is easy to replace.4.The set screws enable the shaft to be fixed to the inner ring of the bearing and preventing slippage. The size of inner hex wrench is recommended below.Specification:Bearing Unit No.: UCFL204Bearing No.: UC204Housing No.: FL204Housing Meterial: Cast IronBearing Meterial: Chromium Steel (GCr15)Bore Diameter: 20mmBolt Hole Size: 12mm / 0.47 Inch (D)Holes Centre Distance: 90mm / 3.54 InchRecommend Mounting Bolt Size: M10Recommend Wrench Size: 3mmNumber of Pack: 1 Pcs

  • Brand: uxcell
  • ASIN: B07GWT1F59

UCFC205-16 Flanged Mounted Bearing, 4 Bolt, 1" Inside Diameter, Set screw Lock, Cast Iron, Inch

UCFC205-16 Flanged Mounted Bearing, 4 Bolt, 1" Inside

The UCFC205-16 flanged mounted bearing has a cast iron flange housing, four bolt holes, and a 1" inside diameter. This ready-to-mount unit has a cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. The unit is secured to the shaft with set screws to prevent slippage and the housing requires four 3/8" mounting bolts (sold separately). These bearings are most commonly used in mechanical equipment where moderate loads and shaft speeds are involved and the shaft and mounting surface are perpendicular to each other.Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking devic...

  • Brand: VXB
  • ASIN: B004ZNAJ4U

Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block Flange Bearing, Zinc (Pack of 4)

Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc

1.8mm Bore Diameter KFL08 Pillow Block Bearing Rhombic Flange. 2.Zinc Alloy Rhombic Flanged Base, rust-proof, durable, have long Life. 3.This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily. 4.Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine. 5.They also can be used into machinery, convey ring systems, film processing machinery, spin machine, printing machinery. Specifications Product Name: Pillow Block Bearing Package Content: 4pcs x Pillow Block Bearing Material: Zinc Alloy, Bearing Steel Color: Gray Weight: 112g Model: KFL08 Overall Size: 48(+/-2) x 27(+/-2) x 12(+/-2)mm/1.9-inch x 1.06-inch x 0.47-inch(L*W*H) Bearing Inner Dia.: 8mm/0.31-inch Mounting Hole Diameter: 5mm/0.2-inch Mounting Hole Distance: 37mm/1.46-inch.

  • Brand: uxcell
  • ASIN: B073L2SQMZ
Similar Flanged Mounted Bearings Results
Flanged Mounted Bearings Video Results

SKF Y-Bearings - Mounting and dismounting

Flanged Mounted Bearings

Mounting and dismounting SKF Y-Bearings. Visit http://www.skf.com or http://www.mapro.skf.com for more information.

  • Likes: 149
  • View count: 60062
  • Dislikes: 8
  • Comments:
Tags: SKF,Y-bearings,Bearing fitting tool

4 Ball Bearing Mounting Methods - Intro, Mounting and Maintenance (Full)

Flanged Mounted Bearings

PTI shows the differences between the four different locking mechanisms for mounted ball bearings - set screw, eccentric locking collar, concentric locking collar, and adapter. Learn how to install and tighten the bearings, as well as how to maintain them once installed. PTI stocks the widest a...

  • Likes: 103
  • View count: 17110
  • Dislikes: 4
  • Comments:
Tags: power transmission,pti,pt international,industrial distribution,manufacturing,Ball Bearing (Inven...

Flange bearing details for grandson

Flanged Mounted Bearings

Grandson Max was working on a small vertical axis wind turbine for a school project. I made this video for him to give a general idea of how flange bearing are secured to keep the shaft stable and vertical. In his application the bearing are are located on the bottom of the vertical axis shaft only.

  • Likes: 369
  • View count: 78408
  • Dislikes: 9
  • Comments:
Tags: flange,flange bearing,vawt,bearings,axle,flange bearing details,flange bearing instruction

FYH Bearing UCF201 12mm Square Flanged Mounted Bearings by VXB

Flanged Mounted Bearings

http://www.vxb.com/page/bearings/PROD/Kit11543 FYH Bearing UCF201 12mm Square Flanged Mounted Bearings by VXB.com, the online supplier of ball bearings, distributor of linear motion and ceramic bearings.

  • Likes: 6
  • View count: 8871
  • Dislikes: 8
  • Comments:
Tags: VXB Bearings,ball bearings,official,vxb.com,bearings,bearing,supplier,distributor,online,12mm inn...

FYH SBPF204 20mm Stamped steel round three bolt Flanged Mounted Bearings by VXB Ball Bearings

Flanged Mounted Bearings

FYH Bearing SBPF204 20mm Stamped steel round three bolt Flanged Mounted Bearings by VXB.com, the online supplier of ball bearings, distributor of linear motion and ceramic bearings. http://www.vxb.com/page/bearings/PROD/Kit9363

  • Likes: 1
  • View count: 2411
  • Dislikes: 0
  • Comments:
Tags: VXB Bearings,ball bearings,official,vxb.com,bearings,bearing,supplier,distributor,online,FYH,Moun...