Adafruit Short Flex/Bend Sensor [ADA1070]

Adafruit Short Flex/Bend Sensor

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface. These sensors are easy to use, they are basically resistors that change value based on how much their flexed. If they're unflexed, the resistance is about ~25KΩ. When flexed all the way the resistance rises to ~100KΩ. They're pretty similar to FSRs so following this tutorial will get you started . You can use an analog input on a micro-controller (with a pullup resistor) or a digital input with the use of a 0.1uF capacitor for RC timing. The bottom part of the sensor (where the pins are crimped on) is very delicate so make sure to have strain relief - such as clamping or gluing that part so as not to rip out the contacts!

  • Brand: Adafruit
  • ASIN: B00SK8PZVS
  • UPC: 711978442074

SPECTRA SYMBOLFLEX SENSOR 4.5"

SPECTRA SYMBOLFLEX SENSOR

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - these sensors were used in the original Nintendo Power Glove.

  • Brand: SPECTRA SYMBOL
  • ASIN: B005T8743E

Adafruit Long Flex sensor [ADA182]

Adafruit Long Flex sensor

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface.These sensors are easy to use, they are basically resistors that change value based on how much they're flexed. If they're unflexed, the resistance is about ~10KΩ. When flexed all the way the resistance rises to ~20KΩ. They're pretty similar to FSRs so following this tutorial will get you started . You can use an analog input on a microcontroller (with a pullup resistor) or a digital input with the use of a 0.1uF capacitor for RC timing.The bottom part of the sensor (where the pins are crimped on) is very delicate so make sure to have strain relief - such as clamping or gluing that part so as not to rip out the contacts!

  • Brand: Adafruit
  • ASIN: B01BNNNS5Q
  • UPC: 701851959270

SPECTRA SYMBOLFLEX SENSOR 2.2"

SPECTRA SYMBOLFLEX SENSOR

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - these sensors were used in the original Nintendo Power Glove.

  • Brand: SPECTRA SYMBOL
  • ASIN: B00FPXIV6M

Thin Film Pressure Sensor, Flex/Bend Sensor SF15-150 Resistance-Type Thin Film Pressure Sensor Force Sensing Resistor, Force Sensitive Resistor

Thin Film Pressure Sensor, Flex/Bend Sensor SF15-150 Resistance-Type

Features: The flexible sensor has the characteristics of flexible ultra-thin, and extreme speed response, etc.  Waterproof and pressure sensitive dual function This pressure sensor has the characteristic of high stability, and long service life Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. Application: off-bed monitoring, intelligent breathing belt, sleep monitoring, electronic shelf. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit. Specification: Model: SF15-150 Length: 150 mm/5.9in Width: 15 mm/0.6in Range:10 kg Thickness:less than 0.35mm Response point: less than 50g Test voltage: typical dc3.3v Durability: more than 1 million times Response time: less than 10ms Recovery time: less than 15ms Working temperature:- 20℃~ 60℃ EMI: no ESD: not sensitive Weight:4/0.1oz Package list: 1 x Pressure Sensor

  • Brand: Walfront
  • ASIN: B07MBQ2W5C
  • UPC: 719527135477

Flex Sensor 2.2"

Flex Sensor

--Description-- A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications. --Note-- Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex. Datasheet - http://www.electronics123.net/amazon/datasheet/FLEX%20SENSOR%20DATA%20SHEET%202014.pdf ITP Sensor Workshop - https://itp.nyu.edu/physcomp/lessons/sensors-the-basics/ Quickstart Guide - https://learn.sparkfun.com/tutorials/flex-sensor-hookup-guide Bildr Tutorial - http://bildr.org/2012/11/flex-sensor-arduino/

  • Brand: SparkFun
  • ASIN: B074KN9PV9
  • UPC: 757347469655

Thin Film Pressure Sensor, Flex/Bend Sensor ZD10-100 500g Resistance-Type FSR Sensor Thin Film Pressure Sensor Force Sensing Resistor, Force Sensitive Resistor

Thin Film Pressure Sensor, Flex/Bend Sensor ZD10-100 500g

Features: The flexible sensor has the characteristics of flexible ultra-thin, and extreme speed response, etc.  Waterproof and pressure sensitive dual function Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. High sensitivity and long service life Application: Smart home, medical electronics. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit Specification: Model: ZD10-100 Length: 100 mm/3.9in Width:10mm/04in Range: 0 ~ 500g Thickness:less than 0.25mm Response point: less than 20g Test voltage: typical dc3.3v Durability: more than 1 million times Response time: less than 10ms Recovery time: less than 15ms Working temperature:- 20℃~ 60℃ EMI: no ESD: not sensitive Weight: Approx.3g/0.1oz Package list: 1 x Pressure Sensor

  • Brand: Walfront
  • ASIN: B07MHTWR1C
  • UPC: 719527134333

MyoWare Muscle Sensor

MyoWare Muscle

Harness the power of your muscle signals! | The MyoWare measures muscle activity through the electric potential of the muscle, commonly referred to as electromyography (or EMG for short). When your brain tells your muscle to flex, it sends an electrical signal to your muscle to start recruiting motor units (the bundles of muscle fibers that generate the force behind your muscles). The harder you flex, the more motor units are recruited to generate greater muscle force. The greater the number of motor units, the more the electrical activity of your muscle increases. The MyoWare will analyze this electrical activity and output an analog signal that represents how hard the muscle is being flexed. The harder you flex, the higher the MyoWare output voltage will go. Specifications: * Arduino Compatible! * Dimensions: 2.1" x 0.81" (52.3 mm x 20.7mm) * Operating Voltage: +3.3V or +5V (typical), +2.9V (min), +5.7V (max) * Supply Current: 9 mA (typical) * Input Impedance: 110 GOhm * Common Mode Rejection Ratio (CMRR): 110 * Input Bias: 1 pA ***Note: This product requires electrodes; these are not included, but they are available separately***

  • Brand: MyoWare
  • ASIN: B018TIWR32
  • UPC: 869249000109

CENTAURUS Replacement for Samsung J727 Home Button Keypad Key Sensor Button Headphone Audio Jack Flex Cable fit Galaxy J7 2017 Prime J727 J727V J727T J727T1 J727A J727P / Sky Pro S727VL S737TL

CENTAURUS Replacement for Samsung J727 Home Button Keypad

Compatible with: For JC746-SS-J727-JACK-FC Package include: 1pcs New Headphone Audio Jack Flex Cable For JC746-SS-J727-JACK-FC  Shipping Information (Ship From USA)  3-6 business days to USA.  if you don't receive the items after 10 Business days,please Message me as soon as you can.I will do my best to resolve the problems : ?

  • Brand: CE CENTAURUS ELECTRONICS
  • ASIN: B07QCWVXM2

DryBuddyFLEX 3 Wireless Bedwetting Alarm System with Magnetic Sensor & Remote. New 3rd Gen. Long-Range True Wireless with Magnetic Sensor & Remote. Most Convenient, Feature-Rich & Effective.

DryBuddyFLEX 3 Wireless Bedwetting Alarm System with Magnetic

The new 3rd Generation DryBuddyFLEX 3 offers more features and conveniences than any other bedwetting alarm today. Use it with standard cotton briefs or with optional DryBuddy wetness sensing briefs. True wireless - there are no wires connecting the sensor to the wireless transmitter or receiver. Wireless remote control can turn off the alarm when sounding, and turn the entire system on and off. Patented magnetic sensor attaches the sensor magnetically to regular cotton briefs. Integrated wireless transmitter is one unit with the sensor. Sealed water-resistant sensor/transmitter with sealed battery and battery life of over 2,000 triggers. Sensor will not respond to gradual increase in wetness. So false alarms by perspiration are eliminated. Receiver (called transceiver) uses standard AC power. No batteries required. Transmission distance between sensor, remote and transceiver is up to 61 meters (200 feet). Very loud alarm allows it to be placed at some distance from the user. Patented transceiver (receiver-transmitter) re-transmits any signals received from the sensor or remote. Transmission distance between transceivers up to 61 meters (200 feet). Transceivers can be daisy-chained to substantially extend the range throughout a home for control and alarming. Very loud...

  • Brand: DryBuddy
  • ASIN: B075WCGH9K
  • UPC: 852930006313

Miuzei Raspberry Pi 3 Camera Module, 5 Megapixels Wide-Angel Fish-Eye Camera, OV5647 Sensor with Flex Cable for Raspberry Pi 4/ 3B+/ 3B/ 2B/ Pi Zero

Miuzei Raspberry Pi 3 Camera Module, 5 Megapixels

Miuzei Wide-Angel Fish-Eye Camera for Raspberry Pi 3 B+/3/2 Model B/B+/A+/1/Zero with OV5647 Module, 160 Wide Angel, 1080P, HD Video, Adjustable Focus, Mount Lens, Pi Ribbon Cable & FPC Cable Come with 15pin Ribbon cable to connect raspberry pi 2 / 3 / 3 b+ and FPC cable to connect Pi Zero 1080p 5647 sensor in a fixed focus module Compatible with Raspberry Pi 3 b+ / 3 b / 2b / A+ / B+

  • Color: Raspberry Camera
  • Brand: Miuzei
  • ASIN: B07BTP8VXL
  • UPC: 656664839953

BisLinks New Fingerprint Scanner Proximity Sensor Flex Ribbon Replacement for iPad Mini 4

BisLinks New Fingerprint Scanner Proximity Sensor Flex Ribbon

This is an OEM Fingerprint scanner proximity sensor flex ribbon replacement for your Apple iPad Mini 4. Replace if currently your device's old fingerprint scanner flex is malfunctioning not working properly with this new replacement part. Technical Information: - Compatible with Apple iPad Mini 4. Excellent replacement to fix issues related your fingerprint scanner flex. OEM replacement ensures a guaranteed fit & functionality Comes ready to install. Includes: - 1 x Fingerprint Scanner Flex Important Note: - Opening your Device will void your Warranty; BisLinks cannot be held responsible for any damage occurred during your repair process. Please feel free to contact us for further information.

  • Brand: BisLinks®
  • ASIN: B01IFCON34

Thin Film Pressure Sensor, Flex/Bend Sensor SF15-600 10kg Resistance-Type Thin Film Pressure Sensor Force Sensing Resistor, FSR Sensor Force Sensitive Resistor

Thin Film Pressure Sensor, Flex/Bend Sensor SF15-600 10kg

Features: The flexible sensor has the characteristics of flexible ultra-thin, and extreme speed response, etc.  Waterproof and pressure sensitive dual function Highly sensitive flexible nanometer materials can realize highly sensitive detection of pressure. High sensitivity and long service life Application: Smart home, medical electronics, wearable devices. When sensor detects outside pressure, the resistance of sensor will change. Pressure signal can be converted into a corresponding electrical signal output using simple circuit Specification: Model:SF15-600 Length: 600 mm/23.6in Width:15mm/0.6in Range: 0 ~ 10 kg Thickness:less than 0.35mm Response point: less than 50g Test voltage: typical dc3.3v Durability: more than 1 million times Response time: less than 10ms Recovery time: less than 15ms Working temperature:- 20℃~ 60℃ EMI: no ESD: not sensitive Weight: Approx.5g/0.2oz Package list: 1 x Pressure Sensor

  • Brand: Walfront
  • ASIN: B07M6YYPQ3
  • UPC: 719527133145

SENSOR,FLEX,O deg:1OK,RESISTANCE RANGE: 10-40Kohms

SENSOR,FLEX,O deg:1OK,RESISTANCE RANGE:

Flex Sensor Maximum resistance: 30k ohms to 40k ohms, proportional to the degree of flexing or bending Nominal resistance: 10k ohms Applications: virtual reality data gloves, robotic, bio-metric, physics and engineering

  • Brand: SPECTRA SYMBOL
  • ASIN: B00B88GDD6

Arducam 1/4 Inch 5 Megapixels Sensor Spy Camera Module with Flex Cable for Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 3, 3B+

Arducam 1/4 Inch 5 Megapixels Sensor Spy Camera

In order to meet the increasing need for Raspberry Pi compatible camera modules. The Arducam team now released another add-on spy camera module for Raspberry Pi series boards which is fully compatible with official one. The board itself is tiny, at around 300mm x 16mm. The neck width of the camera module is 6mm, this highlight making it perfect for an endoscope, spy surveillance or other applications where size and image quality are important. It connects to Raspberry Pi by way of a short ribbon cable. The camera is connected to the BCM2835/BCM2836 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. The sensor itself has a native resolution of 5 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The c...

  • Color: Pi A&B
  • Brand: Arducam
  • ASIN: B012QRGUCQ
  • UPC: 714119484407

ACDelco 12570260 GM Original Equipment Flex Fuel Sensor

ACDelco 12570260 GM Original Equipment Flex Fuel

An ACDelco GM Original Equipment Flex Fuel Sensor monitors the ethanol content of the fuel in your flex fuel vehicle, and is a GM-recommended replacement for your vehicle’s original component. The flex fuel sensor signal is used by the engine control module to adjust the air/fuel mixture and ignition timing for efficient operation. This original equipment flex fuel sensor has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

  • Brand: ACDelco
  • ASIN: B005OVDIN6
  • UPC: 707773904336

Flex Cable (Ear Speaker with Proximity Sensor) for Apple iPhone X with Glue Card

Flex Cable (Ear Speaker with Proximity Sensor) for

Flex Cable (Ear Speaker with Proximity Sensor) for Apple iPhone X. Comes with Glue Card

  • Brand: Wholesale Gadget Parts
  • ASIN: B07N98GZXT

Philips Sonicare ProtectiveClean 5100 Electric Rechargeable Toothbrush, Gum Health, Black

Philips Sonicare ProtectiveClean 5100 Electric Rechargeable Toothbrush, Gum

Improve your gum health up to 100% better than a manual toothbrush with the Protective Clean 5100 rechargeable electric toothbrush. It has a pressure sensor that protects teeth and gums from excess brushing pressure. Brush heads wear out over time. Our Brush Sync technology tracks how long you have been using your Optimal Gum Care brush head and how hard you have been brushing. Your electric toothbrush will beep to inform you when to replace your brush head. Customize your own brushing experience with your choice of 3 modes: Clean, White and Gum Care. The easy-start feature slowly increases the power of the brush as you get used to the Sonicare experience and the smartimer encourages a full 2 minutes brushing time as recommended by your dental professional. The battery charge indicator light lets you know when it is time recharge; 2 week battery life. The kit includes 1 Protective Clean 5100 handle, 1 Optimal Gum Care brush head, 1 charger, 1 travel case.

  • Color: Black
  • Brand: Philips Sonicare
  • ASIN: B078GVH2VJ
  • UPC: 075020072320

4M Robotic Hand Kit

4M Robotic Hand

Explore the wonders of robotics and physical anatomy with the 4M Robotic Hand Kit. This kit contains all the materials needed to assemble a robotic hand with fully-articulated fingers. Pulling a cord makes the robotic fingers curl inward in a realistic gripping action. Perfect for young science enthusiasts, especially those with an interest in robotics. Detailed assembly instructions included. Recommended for ages 8 years and up.

  • Color: Multi
  • Brand: 4M
  • ASIN: B005MK0OPO
  • UPC: 713331843092

Ubiquiti UniFi Video G3 Flex Indoor/Outdoor PoE Camera (UVC-G3-FLEX)

Ubiquiti UniFi Video G3 Flex Indoor/Outdoor PoE Camera

Model: UVC-G3-Flex Unifi G3 Video Camera 1080p Indoor/Outdoor IP Camera with Infrared The UniFi UVC-G3-FLEX 1080p Network Camera with Night Vision from Ubiquiti Networks uses a 1/3" HDR sensor to capture 1920 x 1080 resolution video at 25 fps. IR LEDs provide night vision functionality. The 3.4mm fixed lens delivers an 87.4° horizontal field of view. Audio recording is possible thanks to a built-in microphone. Integrated PoE technology simplifies connectivity by transferring data and power over one cable. The UniFi mobile app enables camera management and live viewing from your iOS or Android device.

  • Brand: UBIQUITI NETWORKS COMMERCIAL
  • ASIN: B07D6MHK7S
  • UPC: 817882024327

Afeax Compatible with iPhone Face Front Camera Flex Cable with Sensor Proximity Light and Microphone Flex Cable Replacement for iPhone 7 Plus 5.5inch

Afeax Compatible with iPhone Face Front Camera Flex

Notice:We test every camera before shipment to make sure our customer get good condition of items,remember to check this video to correctly install,or you may meet bad connection problem:https://www.youtube.com/watch?v=Rwy2CiM1IuU

  • Color: iphone 7 plus
  • Brand: Afeax
  • ASIN: B0796BFFQY
  • UPC: 689771808482

Canary Flex Pack +1-Year Premium Membership | Indoor Outdoor Home Surveillance | Night Vision, Weatherproof, Wire-Free/Plug in | Motion Sensor Alerts (2X Flex + 1 Year Membership, Black)

Canary Flex Pack +1-Year Premium Membership | Indoor

Monitor live activity 24/7 or record HD video with automatic night vision, plus get smart alerts when motion is detected. - Built-in rechargeable battery with optional power cable included. - 360° magnetic swivel base for precise positioning. - Directly access pre-populated numbers for first responders. - Built-in speaker and microphone - two-way Canary talk capable for real-time conversations. - Easy setup and activation - no extra hubs or wiring. - Free 24 hours of cloud storage, with 1-year Canary Membership included for extra security.

  • Color: Black
  • Brand: CANARY
  • ASIN: B07K4CQY24
  • UPC: 855942005787

Philips Sonicare ProtectiveClean 6100 Rechargeable Electric Toothbrush, Whitening, Navy Blue

Philips Sonicare ProtectiveClean 6100 Rechargeable Electric Toothbrush, Whitening,

Protective Clean 6100 rechargeable electric toothbrush delivers up to 100% less stains in just 7 days to whiten your teeth in just 1-week vs a manual toothbrush. It has a pressure sensor that protects teeth and gums from excess brushing pressure. Brush heads wear out over time. Our Brush Sync technology tracks how long you have been using your Diamond Clean brush head and how hard you have been brushing. It will beep to inform you when to replace your brush head. Customize your own brushing experience with intensity settings and your choice of 3 modes: Clean, White and Gum Care. The easy-start feature slowly increases the power of the brush as you get used to the Sonicate experience and the smarter encourages a full 2 minutes brushing time as recommended by your dental professional. The battery charge indicator light lets you know when it is time recharge; 2 week battery life. The kit includes 1 Protective Clean 6100 handle, 1 Diamond Clean brush head, 1 charger, 1 travel case

  • Color: Navy Blue
  • Brand: Philips Sonicare
  • ASIN: B0795VB6XJ
  • UPC: 075020075574

Honeywell Intellisense FG-730 Dual Flex-Guard Audio Glass-Break Detector

Honeywell Intellisense FG-730 Dual Flex-Guard Audio Glass-Break

Honeywell Intellisense FG-730 Dual Flex-Guard Audio Glass-Break Detector OPEN BOX

  • Brand: Honeywell
  • ASIN: B003V18J58
  • UPC: 639874001457
Similar Flex Sensor Results
Flex Sensor Video Results

Flex Sensor - Introduction and Use

Flex Sensor

Please watch: "Buildyourcnc CNC Router on Love Yurts" https://www.youtube.com/watch?v=90KkIO-67Qk --~-- Patrick's Tip Jar: bitcoin:1Gtawd29Sgu5CdvfUnkRg1YBfowCawjFdH Ether:0xa962365100011B79097A7bb9DD51A53eE98266bb If you have found this video to be helpful, consider making a tip. Thanks. This ...

  • Likes: 369
  • View count: 45562
  • Dislikes: 14
  • Comments:
Tags: robotics,flex sensor,sensor,haptic,haptics,ui haptics,microcontroller,ADC,resistor,voltage divide...

Flex Sensor Glove and Robotic Arm

Flex Sensor

A flex sensing glove made with sensors from strips of Velostat that controls a 3D printed robotic arm. Instructions: https://www.instructables.com/id/Flex-Sensor-Glove/ Code: https://github.com/WillDonaldson/Flex-Glove Music: - Good For You by THBD https://soundcloud.com/thbdsultan Creative C...

  • Likes: 880
  • View count: 52159
  • Dislikes: 19
  • Comments:
Tags: Velostat,Flex sensor,arduino,lilypad,glove,flex glove,robotic hand,3D printed,bluetooth,DIY,VR,Vi...

Make a Flex Sensor for Robotic Hand and Arduino | DIY

Flex Sensor

In this tutorial, we will learn how to make and use a flex sensor. We will control servo motor with a flex sensor. Flex sensors are passive resistive devices that can be used to detect bending or flexing. The flex sensor shown in this tutorial is a flex sensor that decreases its resistance in pr...

  • Likes: 2938
  • View count: 211844
  • Dislikes: 95
  • Comments:
Tags: How to make a flex sensor,make flex sensor,how to make flex sensor,flex sensor diy,flex sensor,fl...

Flex Sensor or bend sensor getting started, circuit, interfacing and Arduino programming

Flex Sensor

Download Programming: http://www.electroniclinic.com/arduino-flex-sensor-or-bend-sensor/ Amazon Free Unlimited reading and unlimited listening on any device. sign up for free account and have access to thousands of Programming and hardware designing books. https://amzn.to/2LWmxOg *************...

  • Likes: 51
  • View count: 4246
  • Dislikes: 3
  • Comments:
Tags: flex sensor,bend sensor,flex sensor Arduino,flex resistor,arduino sensors,flex sensor working,Ard...

Flex Sensor with Arduinos - Beginner to Advanced

Flex Sensor

This tutorial demonstrated how to use Flex sensors with Arduinos. i use this in my Ironman Hand/ repulsor to switch on LEDs when the hand is flexed.

  • Likes: 122
  • View count: 8633
  • Dislikes: 9
  • Comments:
Tags: flex sensor,flex sensor tutorial,flex sensor arduino tutorial,arduino,arduino projects,beginnner ...