K&N 57-2575 FIPK Performance Air Intake System

K&N 57-2575 FIPK Performance Air Intake

The K&N FIPK 57-2575 FIPK air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-2575 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the lower air box. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points. The tools needed are a screwdriver, a ratchet set and several wrench. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.

  • Brand: K&N
  • ASIN: B0075VEKJO
  • UPC: 024844292209

For 1999-2004 Ford Mustang (3.8L V6 Engine Only) 3 Inch Aluminum High Flow Cold Air Intake System Black Pipe with Air Filter Red

For 1999-2004 Ford Mustang (3.8L V6 Engine Only)

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1999-2004 Ford Mustang (3.8L V6 Engine Only)

  • Brand: Morakot Racing
  • ASIN: B07KTQTYX2
  • UPC: 754472873586

Spectre Performance 9925 Air Intake Kit with Red hpR Filter for Ford F-150 5.4L

Spectre Performance 9925 Air Intake Kit with Red

Spectre air intake systems are designed to get the most horsepower and torque from your vehicle while they protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish.

  • Brand: Spectre Performance
  • ASIN: B001FDB190
  • UPC: 089601992501

K&N Performance Cold Air Intake Kit 77-2591KP with Lifetime Filter for Ford F150 5.0L V8

K&N Performance Cold Air Intake Kit 77-2591KP with

The K&N 77-2591KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford F150 models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothens and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-2591KP air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs onto the lower air box. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory crank case vent hose and EVAP check valve hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. Some K&N 77 series air...

  • Brand: K&N
  • ASIN: B00UZ4N5MQ
  • UPC: 024844359155

DNAMotoring AIP-2-HS-FF15009-SLSL Cold Air Intake System and Heat Shield

DNAMotoring AIP-2-HS-FF15009-SLSL Cold Air Intake System and Heat

A cold air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horsepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders and this tuning allows us to deliver the maximum power gains throughout the entire rpm range.

  • Color: Silver Piping, Red Filter
  • Brand: DNA MOTORING
  • ASIN: B01LYZ18SX
  • UPC: 817598028398

For Ford F250 F350 F450 Excursion 7.3L V8 High Flow Induction Air Intake System Heat Shield Chrome Piping Kit

For Ford F250 F350 F450 Excursion 7.3L V8

Item Condition: Brand New  It's the ultimate performance Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output  The kit includes a steel heat shield that features a durable powder coating for long lasting good looks  The heat shield protects the filter from dirt and debris and to keep hot underhood air away from the element for a cooler intake air charge It can increase 8-10% of Horsepower and 6-8% of torque  Easy to install and easy to fit with simple tools  No additional parts will be needed for installation after you purchase this kit T-306 Aluminum Chrome Pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture  Steel Heat Shield  All necessary mounting hardwares, vacuum hoses and reducers will be included like in the picture NOTES: No Installation Guide. Professional Installation Is Highly Recommended FITMENT: 1999-2003 Ford F-250 7.3L V8 1999-2003 Ford F-350 7.3L V8 1999-2003 Ford F-450 7.3L V8 1999-2003 Ford F-550 7.3L V8 1999-2003 Ford Excursion 7.3L V8

  • Brand: AJP Distributors
  • ASIN: B01JIS6YQS

For 1997-2003 Ford F-150 Expedition (V8 Engine Only) 3.5 Inch Aluminum High Flow Air Intake System Polish Pipe with Air Filter Red

For 1997-2003 Ford F-150 Expedition (V8 Engine Only)

Item Specifications:100% Brand New, Really High QualityHigh quality aluminum piping for extra performancePulls cooler denser air from inside the inner fender well to make more power and save gasComes with Intake Piping, Air Filter, Hose, Couplers, Clamps, & Brackets & Heat ShieldThe Reuse Of Sensors Some Current Brackets May Be RequiredGuaranteed added horsepower!Comes with FilterThis Item Is Intended For Off Road Use Only - No C.A.R.B StickerInstallation instructions are not includedFitments:1997-2003 Ford Expedition V8 / 1997-2003 Ford F-150 V8

  • Brand: Morakot Racing
  • ASIN: B07KTQR3QB
  • UPC: 754472873487

For Ford F-150 F150 Lincoln Mark Lt 5.4L V8 High Flow Induction Air Intake System + Heat Shield Chrome Piping Kit

For Ford F-150 F150 Lincoln Mark Lt 5.4L

Item Condition: Brand New  It's the ultimate performance Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output  The kit includes a steel heat shield that features a durable powder coating for long lasting good looks  The heat shield protects the filter from dirt and debris and to keep hot underhood air away from the element for a cooler intake air charge It can increase 8-10% of Horsepower and 6-8% of torque  Easy to install and easy to fit with simple tools  No additional parts will be needed for installation after you purchase this kit T-306 Aluminum Chrome Pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture  Steel Heat Shield  All necessary mounting hardwares, vacuum hoses and reducers will be included like in the picture NOTES: No Installation Guide. Professional Installation Is Highly Recommended FITMENT: 2004-2008 Ford F-150 5.4L V8 2006-2008 Lincoln Mark LT 5.4L V8

  • Brand: AJP Distributors
  • ASIN: B01JIS6X7I

For Ford F250 F350 F450 V8 6.4L High Flow Induction Air Intake System + Heat Shield Blue Wrinkle Piping Kit

For Ford F250 F350 F450 V8 6.4L High

Item Condition: Brand New  It's the ultimate performance Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output  The kit includes a steel heat shield that features a durable powder coating for long lasting good looks  The heat shield protects the filter from dirt and debris and to keep hot underhood air away from the element for a cooler intake air charge It can increase 8-10% of Horsepower and 6-8% of torque  Easy to install and easy to fit with simple tools  No additional parts will be needed for installation after you purchase this kit High quality built Washable and Reusable Air Filter as shown in the picture T-306 Aluminum Wrinkle Pipe as shown in the picture Steel Heat Shield Scratch Resistance Pipe  All necessary mounting hardwares, vacuum hoses and reducers will be included like in the picture NOTES: No Installation Guide. Professional Installation Is Highly Recommended FITMENT: 2008-2010 Ford F-250 Super Duty 6.4L V8 2008-2010 Ford F-350 Super Duty 6.4L V8 2008-2010 Ford F-450 Super Duty 6.4L V8

  • Brand: AJP Distributors
  • ASIN: B078JBBL8F

Spectre Performance 9922 High Performance Air Intake

Spectre Performance 9922 High Performance Air

This Spectre air intake system for the Ford Super Duty 7.3L diesel trucks is designed to get large horsepower and torque gains from select F250, F350, F450 and F550 models while protecting your diesel engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Ford Super Duty’s engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish. This intake will not fit trucks with build dates before Dec 7, 1998.

  • Brand: Spectre Performance
  • ASIN: B001FIAJ3Y
  • UPC: 089601992204

K&N Performance Cold Air Intake Kit 57-2556 with Lifetime Filter for ford Expedition/F150, Lincoln Mark LT 5.4L V8

K&N Performance Cold Air Intake Kit 57-2556 with

  • Brand: K&N
  • ASIN: B000CO9U32
  • UPC: 024844109507

K&N Performance Air Intake Kit 57-2581 with Lifetime Red Oiled Filter for 2011-2014 Ford F150 5.0L V8

K&N Performance Air Intake Kit 57-2581 with Lifetime

The K&N 57-2581 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Ford F150 V8 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the lower air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor, crank case vent hose and EVAP hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

  • Brand: K&N
  • ASIN: B015ORDALO
  • UPC: 024844361271

K&N Performance Cold Air Intake Kit 63-2592 with Lifetime Filter for Ford F150 3.5L Turbo Ecoboost

K&N Performance Cold Air Intake Kit 63-2592 with

The K&N 63-2592 Air Charger air intake system replaces the restrictive factory air filter and air intake housing on specific Ford F150 EcoBoost models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench.

  • Brand: K&N
  • ASIN: B01BGZLXWQ
  • UPC: 024844358219

K&N 63-2599 Performance Air Intake System

K&N 63-2599 Performance Air Intake

The K&N 63-2599 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on select Ford F150 models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Brand: K&N
  • ASIN: B078HLS3K2
  • UPC: 024844367419

K&N Performance Cold Air Intake Kit 69-3531TS with Lifetime Filter for Ford Tarus SHO/Explorer Sport/Flex 3.5L V6 Turbo Ecoboost

K&N Performance Cold Air Intake Kit 69-3531TS with

The K&N 69-3531TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-3531TS air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission ...

  • Brand: K&N
  • ASIN: B006DA2EPA
  • UPC: 024844304049

K&N 63-2593 Performance Intake Kit (Non-CARB Compliant)

K&N 63-2593 Performance Intake Kit (Non-CARB

The K&N 63-2593 Air Charger air intake system replaces the restrictive factory air filter and air intake housing on specific Ford F150 EcoBoost models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench.

  • Brand: K&N
  • ASIN: B01BNUSEZ8
  • UPC: 024844358202

For Ford F150 F-150 Expedition Lincoln Navigator 5.4L V8 High Flow Induction Air Intake System Heat Shield Black Piping Kit

For Ford F150 F-150 Expedition Lincoln Navigator 5.4L

Item Condition: Brand New  It's the ultimate performance Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output  The kit includes a steel heat shield that features a durable powder coating for long lasting good looks  The heat shield protects the filter from dirt and debris and to keep hot underhood air away from the element for a cooler intake air charge It can increase 8-10% of Horsepower and 6-8% of torque  Easy to install and easy to fit with simple tools  No additional parts will be needed for installation after you purchase this kit T-306 Aluminum Black Wrinkle Pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture  Steel Heat Shield  Scratch Resistance Pipe All necessary mounting hardwares, vacuum hoses and reducers will be included like in the picture NOTES: No Installation Guide. Professional Installation Is Highly Recommended FITMENT: 2007-2014 Ford Expedition 5.4L V8 2009-2010 Ford F150 5.4L V8 2007-2014 Lincoln Navigator 5.4L V8

  • Brand: AJP Distributors
  • ASIN: B01JLV2YWA

S&B Filters 75-5067 Cold Air Intake for 2011-2014 Ford F150 3.5L EcoBoost (Oiled Cleanable, 8-ply Cotton Filter)

S&B Filters 75-5067 Cold Air Intake for 2011-2014

3-1/2" filtro de alto flujo ram eco diesel specter large diameter throttle body upper manifold jack kn box dorman blue lines 06 2016 kit accessories 08 2003 expedition flow river 350 2000 excursion turbo 2004 exhaust heat shield boost systems evap 05 sport fuel crank wheels 150 04 intakes space lifetime 07 f250 v6 truck tube chrome sb an manifolds with new time spacer carb vacuum gauge stage rv propane rack programmer controller intercooler power usa cover cleaner torque open jegs screwdriver set one hose mpt tuner jeg assembly kits are cleaning mit 2010

  • Brand: S&B
  • ASIN: B00IIVEVQW
  • UPC: 841372034954

BBK Performance 3501 Twin 56mm Throttle Body - High Flow Power Plus Series For Ford F Series Truck And SUV 302, 351

BBK Performance 3501 Twin 56mm Throttle Body -

BBK Power Plus 56mm Throttle Body for F-Series 302/351 for all BBK Ford Truck and RV throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on the vehicle and application. All BBK performance power plus series throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect OEM quality and fit every time. Features like OEM die stamped throttle linkages, double sealed bearings, o ringed throttle shafts and new electronic controlled injection molded plastic gear assemblies for the new modern drive by wire applications, make BBK throttle bodies the number one in performance and quality.

  • Brand: BBK Performance
  • ASIN: B000CIPBDG
  • UPC: 197975035011

ROUSH 422065 2013-2018 Focus ST and RS 2.0 Liter Cold Air Intake System

ROUSH 422065 2013-2018 Focus ST and RS 2.0

From baseline to redline, ROUSH Performance has you covered with the all-new 2013-2018 Ford Focus ST, 2016-2018 Focus RS Cold Air Intake System. This free-flowing air intake kit contains a custom ROUSH-branded air box that is topped with EPDM foam for an airtight seal to the hood. Also included is a premium high-flow air filter that is re-usable simply by washing and oiling. The 3" high-strength induction tube has a black texture finish for an OEM fit and finish. You will also receive a premium, silicone coupler that features reinforced, weaved fibers for a superior seal between the induction tube and the turbo inlet. The engineers at ROUSH Performance kept the customer in mind when fabricating this kit by utilizing the factory PCM calibration, which will not void your factory engine warranty. In addition to long-lasting, durable components, this kit keeps the factory PCV connection so no drilling or cutting to any of the components are required. Installation is quick and simple, installing in less than one hour with basic tools. All mounting clamps and hardware is also included in this kit, which carries the standard ROUSH 90-Day Limited Warranty.

  • Brand: Yates Performance
  • ASIN: B06ZYHC8HW
Similar Ford High Flow Intake System Results
Ford High Flow Intake System Video Results

K&N High Flow intake system install and review Ford F150 4x4

Ford High Flow Intake System

I install a K&N fresh air intake on my 2001 Ford F150 with the 5.4L triton v8 engine. Enjoy and comment with any questions. Hey ya'll, come support me on Patreon! https://www.patreon.com/KevinReese Follow Kevin Reese! Instagram: https://www.instagram.com/real_kevin_reese Snapchat: https://ww...

  • Likes: 295
  • View count: 32693
  • Dislikes: 14
  • Comments:
Tags: Ford (Automobile Make),K and N,K&N,cold air intake,ford f150,5.4L engine power,air intake system,...

K&N Cold Air Intake Update, What Happened to It??

Ford High Flow Intake System

Last February, I installed a K&N cold air intake system on my 2012 Ford Focus. Here is an update on what happened to it, as well as my answers to some of your questions! As always, subscribe if you like the content and find us on social media! End screen music by: Alan Walker "Fade [NCS Releas...

  • Likes: 844
  • View count: 191433
  • Dislikes: 248
  • Comments:
Tags: K&N,Cold Air Intake,Ram Air Intake,Ford,Focus,Ford Focus ST,ST,Hot Hatchback,Fast Cars,Cold air i...

Check out what a K&N Performance Air Intake System can do for your vehicle

Ford High Flow Intake System

Whether you’re a seasoned mechanic or are new to wrenching on your own car, K&N air intake systems are a quick and easy way to add more performance to your vehicle. With over 600 intake systems available, you can easily find the part for your car or truck. Get more performance with a K&N air inta...

  • Likes: 229
  • View count: 59808
  • Dislikes: 12
  • Comments:
Tags: K&N,cold air intake,air intake,intake,horsepower,intake system

Why Not to Buy a Cold Air Intake - Bad Car Mods

Ford High Flow Intake System

Cold air intake explained and why not to buy one for your car, DIY with Scotty Kilmer. Bad car mods. Stock air filter vs cold air intake, which is better for your engine? How a cold air intake works, the pros and cons of having one in your car or truck. There are benefits to having a cold air int...

  • Likes: 26068
  • View count: 2233911
  • Dislikes: 7365
  • Comments:
Tags: bad car mods,car mods,car modification,car modified,cold air intake,cold air intake before and af...

2015-2018 F150 K&N Series 77 High Flow Performance Cold Air Intake 5.0L Review & Install

Ford High Flow Intake System

Shop This K&N Series 77 High Flow Performance Cold Air Intake: http://bit.ly/2oT2Byn Subscribe for New Ford Truck Videos Added Daily: http://bit.ly/ATFSubscribe This K&N Series 77 High Flow Performance Cold Air Intake directs more air into your engine for a major power enhancement of up to 13.86...

  • Likes: 25
  • View count: 3494
  • Dislikes: 1
  • Comments:
Tags: americantrucks,american trucks,americantrucks.com,ford,f150,ford f150,f150 parts,f150 build,ameri...