Mophorn Non-dismantle Cleaner 600ML Automotive Non-dismantle Fuel Injector Tester and Cleaner Fuel System Fuel Injector Cleaner Tool Set for Petrol EFI Throttle (0-120PSI non-dismantle)
Mophorn Non-dismantle Cleaner 600ML Automotive Non-dismantle Fuel Injector
Automotive Non-dismantle cleaner Tool Set for Petrol EFI Throttle The automotive fuel injector cleaner tool is a set of automotive non-dismantle fuel system. Including many different adapters, it covers almost all the EU, Asia, USA cars and light trucks FeaturesAutomotive non-dismantle fuel system cleaner injector clean set Anti-corrosion, anti-friction connectors for fast-connectionAnti-friction oil tubes, suitable for all cleaning fluidSpecial handling one-way valves, able to seal up gasDurable pressure regulating valvesMulti-functional valves for fluid adding and gas releasingRotate to add fluid, gas releasing speed controlled with different force levelVarious connectors to fit for almost all the EU, Asia, USA cars and light trucksItem Specifications Pressure: 0-140PSIPackage Dimensions: 42*37*13cm Shipping Weight: 3.66kg Fit For: USA EU Asia cars and light truck (petrol 12V)Check Fuel Injection Model, Throttle or EFI:EFI Model :1. Find out the fuel return hose, disconnect and plug with suitable adaptor2. Find out the fuel inlet hose, disconnect and connect with the outlet hose of the cleaner with proper adaptor3. Connect the outlet and return hose of the fuel tank and open the tank cover; if there is no return hose, please move the fuse of fuel pump so that the pump will not ...
- Color: non-dismantle
- Brand: Mophorn
- ASIN: B06XF12L7G
- UPC: 601285859743
BAOSHISHAN Non Dismantle Car Fuel Injection System Cleaning kit Cleaning Throttle Toolkit for Auto Fuel Injector and Cleaner Machine (Double Bottle)
BAOSHISHAN Non Dismantle Car Fuel Injection System Cleaning
BAOSHISHAN Operation 1.Unscrew the bottle, pour the cleaning liquid into the bottle, and fasten the bottle as it is before; 2.Remove the petrol pump safety plug so that the petrol pump does not work. (This step must be done before cleaning.) 3.Remove the engine oil inlet pipe, connect the fitting that meets the size of the oil inlet, and then connect it with oil tube in the bottle 4.If the engine has a return pipe, plug the return pipe with a suitable connector 5.Connect the air source, regulate the pressure, start the engine, and allow the engine to work normally and start to clean: (Pressure regulation of the EFI car is about 25kg/c㎡, and it must be set according to the engine's required pressure) 6.The cleaning time is about 20 minutes or until the newly installed cleaning fluid is used up; 7.After the cleaning is completed, remove the tube, restore the engine oil line as it is before, start the engine, properly refuel, and check that there is no leakage at each oil take-in pipe. Clean the site for future use. To the throttle: To the throttle system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: -Generally speaking, inlet hose is bigger, return hose is smaller; -There is always a fil...
- Brand: BAOSHISHAN
- ASIN: B078KT7C15
BETOOLL Pro Fuel Injection Pressure Tester Kit Gauge 0-140 PSI
Wisamic Automotive Non-dismantle Fuel Injector Cleaner Kit and Tester with Case for Petrol EFI Throttle Petrol Cars, 750ML Tank, 145PSI
Wisamic Automotive Non-dismantle Fuel Injector Cleaner Kit and
Features ☆Anti-friction oil tubes, suitable for all cleaning fluid ☆Special handling one-way valves, able to seal up gas ☆Durable pressure regulating valves ☆Multi-functional valves for fluid adding and gas releasing ☆Rotate to add fluid, gas releasing speed controlled with different force level Check fuel injection model, throttle or EFI: EFI Model: 1. Find out the fuel return hose, disconnect it and plug it with suitable adapter 2. Find out the fuel inlet hose, disconnect it and connect it with the outlet hose of the cleaner with proper adapter 3. Connect the outlet and return hose of the fuel tank, and open the tank cover; if there is not return hose, please move the fuse of the fuel pump so that the pump will not work 4. Charge the cleaning fluid into the tank of the cleaner 5. Connect the air source power to the air port of the cleaner, adjust its pressure 40-50PSI 6. Check all connect point to make sure there is not leakage 7. Start the engine to clean the fuel system. To the throttle: To the throttle system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: -. Generally speaking, inlet hose is bigger, return hose is smaller; -. There is always a filter connected in the inlet hos...
- Brand: Wisamic
- ASIN: B075KPD5S2
- UPC: 714676468421
Lang Tools TU-470B Fuel Injection Cleaner
Lang Tools TU-470B Fuel Injection
Lang Tools (TU-470B) Fuel Injection Cleaner allows you to clean carbon from intake valves, fuel passages, and cylinders with a professional carbon cleaning solution. Equipped with two gauges, the TU-470B enables a technician to check the vehicle fuel pressure with the bottom gauge, and easily set cleaning pressure with the top gauge. Both gauges are 2-1/4" and have dual scale dials with ranges from 0-100 PSI and 0-7 bar.
- Brand: Lang Tools
- ASIN: B004IQM1ZY
- UPC: 763279547019
OTC Tools 7649A Automotive Accessories
OTC Tools 7649A Automotive
OTC's 7649A Fuel Injector Cleaning Kit has everything you need to begin direct injector cleaning and decarbonizing. At the core of this kit is the OTC 7448A wide throat Fuel Injection Cleaner Canister which provides you with a heavy duty stainless steel container for years of service along with a 3-1/2" easy to read mechanical pressure gauge, a removable hose constructed to handle aggressive cleaners and ethanol fuels without cracking or swelling, an easy to open/close ball valve for immediate system control, a blowout fitting attachment to clean your tool when finished, and of course the OTC adapter Application Manual showing all the information you need to work on virtually all vehicles manufactured between 1997 - 2013 in the US. In addition to this, the OTC 7649A Fuel Injector Cleaning Kit includes a spring lock coupling adapter, several quick connect and banjo fittings, as well as a decarbonizing adapter for throttle plate/manifold cleaning. These adapters permit adapting the canister cleaner to many domestic and import vehicles. Clogged fuel injectors cause sluggish performance, poor fuel economy and rough idle. The OTC 7649A Fuel Injector Cleaning Kit is the right tool to start addressing these vehicles and get them back on the road. This kit includes the following componen...
- Brand: OTC
- ASIN: B00UE4CQR2
- UPC: 731413581564
CTA Tools 3360 Fuel Injection Cleaning Canister
CTA Tools 3360 Fuel Injection Cleaning
CTA Tools 3360 Fuel Injection Cleaning Canister - for use with CTA's Fuel Injection Sets and Adapters. Canister is filled with cleaning fluid and attached to gauge head and adapters to enter fuel system and injectors. Includes 3-1/2-Inch (90mm) gauge with dual calibration (5 - 145 PSI/25 - 1,000 kPa) and 5-Foot (1.5m) hose assembly with 1/8-Inch NPT hose end to adapt to different fittings. Use with shop air. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
- Brand: CTA Tools
- ASIN: B005B4NCPA
- UPC: 053001033607
OTC Tools (7448A) Fuel Injection Cleaner Canister
OTC Tools (7448A) Fuel Injection Cleaner
The OTC 7448A is designed for direct fuel rail and injection cleaning. Our recommended process runs your engine with a strong cleaning solvent, like OTC's 7000A Pro Inject-R Kleen (sold separately) - which is introduced directly into the fuel rail where maximum benefit is achieved. Debris that is loosened or dissolved is then combusted and ultimately removed through the vehicles exhaust system. It is machined from stainless steel hydraulic cylinder - has a 22 oz. capacity, and is able to handle pressures up to 30,000 psi. The full size cap makes adding solvents easy and spill proof. The 3-1/2" gauge makes setting the outlet pressure simple and accurate. Only a quarter turn is needed to open - or close the system. Our hose meets the SAE J30R9 standard for safe transfer of gasoline and ethanol blended fuels. Our hose is removable which improves storage options and if inadvertently damaged - very easy to replace. To improve performance life, we added a "blowout" attachment so any residual solvent can be removed from the hose with shop air supply. Finally, we include our Fuel Injection Application Manual 6550MAN-13. This accessory is packed full of pertinent information for gasoline powered vehicles from 1997 to 2013 model years and is ONLY available from OTC. We give you Fuel Pump D...
- Brand: OTC
- ASIN: B00GZ0H9VC
- UPC: 014445558835
OTC 4480 Stinger Basic Fuel Injection Service Kit
OTC 4480 Stinger Basic Fuel Injection Service
OTC's Basic Fuel Injection Service Kit performs running, residual, rail and flow rate pressure tests. Kit includes adapters, hoses and fittings to test fuel injection systems. Also includes two popular adapters for import vehicles as well as a GM TBI adapter. Professional dual scale gauge reads 0-100 PSI and 0-700 kPa with relief valve, fuel discharge hose and rubber boot. All packaged in a professional, heavy-duty, blow molded carrying case. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.
- Brand: OTC
- ASIN: B002RVJX1C
- UPC: 731413549311
EWK Pressurized Fuel Injection Cleaner Canister Intake Valve System Cleaning Tester Kit
EWK Pressurized Fuel Injection Cleaner Canister Intake Valve
●Customer Service： 1. Office hours: Monday to Friday 9:00am to 3:30pm (Pacific Time). 2. We will reply your message within 24~48 hours. ● Shipping： 1. Monday to Friday (orders placed before AM8:00) will be shipped within 24 hours. 2. Orders placed after Friday AM8:00 or national holiday will be shipped on the coming business day. 3. Buyers responsible for all custom and brokerage fees for shipments outside of the United States. ●30 Days Money Back Guarantee： 1. Customer MUST contact us within 30 days after the purchasing. 2. Item must be sellable condition with the original packaging. Fees may apply if item is determined as not original condition. 3. Buyer should be responsible for the return freight. 4. 20% restocking fee is NON-REFUNDABLE under any circumstances.
- Brand: EWK
- ASIN: B01EEU0HA4
- UPC: 700587513459
How to Properly Perform a Fuel System Cleaning
What I am showing you is the proper way to clean the fuel system of your vehicle. The vehicle in this video is a 1998 Saturn SL2 with a 1.9L DOHC engine. It has over 177K miles and is the second time a fuel system cleaning will have been performed. The last time, I had it done professionally at...
- Likes: 865
- View count: 699476
- Dislikes: 189
Does Techron Fuel System Cleaner Actually Work? (with PROOF)
In this video I tested Techron Concentrate Plus by Chevron. I use a mini borescope camera to look into the engine and see how dirty the engine is before the fuel treatment and then after the fuel treatment. I followed the instructions on the container and Techron performed similarly to gumout. ...
- Likes: 24009
- View count: 1974893
- Dislikes: 689
How To Clean Fuel Injection Systems - Fuel Injector Service - OTC 7448
A quick video on using the OTC 7448 fuel injection cleaner tool to service fuel injection systems. Fuel injection system service is a critical maintenance item that should be performed every 6 years or 60,000 miles to insure trouble free operation of fuel injectors, remove engine carbon deposits ...
- Likes: 596
- View count: 115269
- Dislikes: 63
How to Clean Duramax Injectors with Pre & Post Results
This video goes in depth into the process for cleaning your General Motors (Isuzu) Duramax Diesel injectors. This process was performed on a 2003 LB7, however it is nearly identical for all generations (LLY, LBZ, LMM, LML, etc.). The part number for the GM Upper Intake and Injector cleaner is X66...
- Likes: 187
- View count: 45466
- Dislikes: 6
Fuel injection cleaning
Easy way to clean the fuel injectors with carb cleaner Making injection connector: https://www.youtube.com/watch?v=qV2qlEql9js Fuel injection cleaning: https://www.youtube.com/watch?v=PO8pQLl-ago for contact email address: [email protected] Facebook account : https://www.facebook.co...
- Likes: 16804
- View count: 4302787
- Dislikes: 2942