Full Face Black Rubber Dive Mask - Scuba Mask

Full Face Black Rubber Dive Mask - Scuba

This is a Commercial Diver's Full Face Scuba Mask. It'll also fit better because of the more pliable rubber.You'll have no jaw fatigue with this mask. The mask supports the weight of the regulator. Just remove your regulator mouthpiece and place into mask.If you want a full-face mask, check this one out!

  • Color: Rubber
  • Brand: IST
  • ASIN: B000KD0BI8
  • UPC: 818363013540

Pushbutton Air Nozzle Powered by your BC Hose

Pushbutton Air Nozzle Powered by your BC

Fill rafts, innertubes, just about any inflatable with this air nozzle. Use as an air gun to clean delicate electronics. Dry your gear.The uses are endless.Just push the button to the side to release the air!Chrome plated brass will last a lifetime!Fits standard BC inflator hose.

  • Brand: IST
  • ASIN: B000JV37V4
  • UPC: 818363016503

IST CT-6 Regulator Second Stage Calibration and Service Tool

IST CT-6 Regulator Second Stage Calibration and Service

Your dive buddy will be counting on you to have a properly serviced and fully-functional octopus. The second stage has an adjustable air inlet orifice that needs regular pre-dive checks to ensure it's properly calibrated. Don't tempt disaster: get the IST CT-6 Regulator Second Stage Calibration and Service Tool and dive with confidence. From IST: a respected manufacturer of reliable, high-quality scuba diving products for over 35 years. User Guide The IST Regulator Second Stage Calibration and Service Tool consists of two parts: the gauge and the adjustment tool. 1. Unscrew the gauge to disassemble the two parts. 2. After dissembling, there are two sides for the tool: one side is for hexagonal attachment, the other is for flathead attachment. 3. Attach your hose to the appropriate side, then reattach the gauge by screwing it onto the other side. 4. Adjust the center wheel to adjust the second stage intake pressure.

  • Color: Second Stage Calibration Tool
  • Brand: IST
  • ASIN: B01H4CQRDK
  • UPC: 818363015735

2nd Stage Scuba Regulator Hose Swivel Adapter

2nd Stage Scuba Regulator Hose Swivel

The Swivel Hose Adapter connects to the second stage of the regulator to allow the second stage to move in several directions. The swivel movement makes the regulator mouthpiece move without restriction during the dive. Moving your head in any direction will not cause the second stage to pull on your jaw with the Adapter Hose Swivel.Make your diving more enjoyable and your regulator more comfortable in your mouth!

  • Brand: IST
  • ASIN: B000KD1FZG

IST 3 ft Hose Wrap for Scuba Regulator to Help Protect & Identify Yellow

IST 3 ft Hose Wrap for Scuba Regulator

Use this colorful hose wrap to easily identify your octopus (safe second) hose and protect it from abrasions at the same time.

  • Color: Yellow
  • Brand: IST
  • ASIN: B000KBHD9U

IST Ortho-Conscious Comfort Mouthpiece for Scuba, Snorkel (Clear Silicone)

IST Ortho-Conscious Comfort Mouthpiece for Scuba, Snorkel (Clear

The Silicone Ortho-conscious Comfort Mouthpiece for Scuba, Snorkel is the perfect upgrade or replacement mouthpiece for your regulator, octo or snorkel. Constructed of soft, flexible hypoallergenic silicone, the mouthpiece offers an ortho-conscious shape that conforms more naturally to the contours of the mouth and jaws. Integrated, textured bite tabs make it easy to hold the mouthpiece securely in place, reducing jaw fatigue. Rounded, smooth edges won't chafe or cut into sensitive gum and cheek areas. Easily replaces any standard regulator or snorkel mouthpiece: just position over the air inlet and secure with your own zip tie. Excellent addition to any save a dive kit.

  • Color: Clear Silicone
  • Brand: IST
  • ASIN: B0058KUVPQ
  • UPC: 818363017777

IST Ortho-Conscious Hypoallergenic Silicone Mouthpiece for Scuba, Snorkel (Clear Silicone)

IST Ortho-Conscious Hypoallergenic Silicone Mouthpiece for Scuba, Snorkel

The Ortho-conscious Hypoallergenic Silicone Mouthpiece for Scuba, Snorkel is the perfect upgrade or replacement mouthpiece for your regulator, octo or snorkel. Constructed of soft, flexible hypoallergenic silicone, the mouthpiece offers an ortho-conscious shape that conforms more naturally to the contours of the mouth and jaws. Integrated, textured bite tabs make it easy to hold the mouthpiece securely in place, reducing jaw fatigue. Easily replaces any standard regulator or snorkel mouthpiece: just position over the air inlet and secure with your own zip tie. Excellent addition to any save a dive kit.

  • Color: Clear Silicone
  • Brand: IST
  • ASIN: B000KD3EPU
  • UPC: 818363017791

IST DT4 Scuba Maintenance and Repair Technician Tool Kit

IST DT4 Scuba Maintenance and Repair Technician Tool

While the IST DT4 Scuba Maintenance and Repair Technician Tool Kit is designed for service technicians, divers can use it to handle simple fixes, cleaning and maintenance tasks themselves as well. Liveaboards and other dive boats will want to keep this tool kit on hand to be prepared for most common dive equipment repairs. All the most essential dive equipment maintenance and repair tools and implements are tucked into elasticized loops inside a zippered, fold-over canvas case with nylon webbing carry handles. The kit contains: 2nd stage 4 slot tool 2nd stage orifice adjustment tool 1st stage pin spanner 1st stage handle (to connect to low-pressure port and high-pressure port) 1st stage face tool Tank valve knob screwdriver BCD low-pressure hose valve tool 4 Allen keys: 4mm, 5mm, 6mm, 8mm Adjustable wrench Philips screwdriver Flat screwdriver Pointed C-clip pliers Awl Utility knife O-ring hooks Cable/zip ties O-rings: 1st stage LP & HP port / 2nd stage hose / BCD hose valve / yoke or DIN tank valve Silicone grease FULL MANUFACTURER'S WARRANTY

  • Color: Technician's Tool Kit
  • Brand: IST
  • ASIN: B01H7WCDQM
  • UPC: 791090582131

IST Pony bottle gauge 5000 PSI

IST Pony bottle gauge 5000

IST's Pony bottle gauge is a mini package with lots of convenience built-in. It easily connects to the high-pressure port of your pony bottle regulator or other alternate tank regulator to show pressure in an easy-to-read display. You know the hassles involved with using a pony bottle and trying to find out how much air is in the tank. Switching regulators to view the primary pressure gauge or adding a separate pressure gauge to the pony bottle is an inconvenience. Problems over, with IST's mini SPG. It has a pressure range from 0-350 BAR, an easy to read display and comes equipped with a high-pressure O-ring for immediate installation. This is a great, must-have accessory for your dive bag!

  • Brand: IST
  • ASIN: B003515YDO
  • UPC: 818363015773

IST 1st Stage 90 Degree Hose Adapter

IST 1st Stage 90 Degree Hose

The IST RA6 First Stage Intermediate Pressure Hose 90° Adapter allows for re-routing the intermediate pressure hose where it attaches to the first stage, directing the hose to the side rather than having it attach perpendicular to the first stage. Use this adapter to streamline your kit and optimize the position of your regulator hose to reduce jaw fatigue.

  • Brand: IST
  • ASIN: B00CB65IT4
  • UPC: 814454021425
Similar Ist Scuba Regulator Results
Ist Scuba Regulator Video Results

60:Second ScubaLab - IST Sports R860 Regulator

Ist Scuba Regulator

The R-860 holds the top spot in IST Sports' Pro Line of scuba regulators. Its R-8 first stage is a balanced diaphragm design that's available with an optional environmental kit that prevents freezing when diving in cold-water conditions. View more information here: http://www.scubadiving.com/ge...

  • Likes: 1
  • View count: 293
  • Dislikes: 0
  • Comments:
Tags:

How to Assemble Scuba Regulators

Ist Scuba Regulator

https://www.simplyscuba.com/collections/regulators-1st-and-2nd-stages This video shows you how to easily and safely assemble your diving regulators for standard recreational configurations. It may look complex but with a few basic tools and a little time and patience any one is able to safely p...

  • Likes: 541
  • View count: 138379
  • Dislikes: 16
  • Comments:
Tags: Scuba Diving (Sport),how to assemble regulators,scuba diving regulators,diving regulators,How to ...

Scuba Failure at 180 feet - ZEAGLE Regulator First stage fails

Ist Scuba Regulator

My ZEAGLE Regulator First Stage "exploded" underwater on a solo dive to 185 ft. The regulator was working perfectly one moment and the next was a very loud explosion (the Go Pro does not capture the volume) an a ton of air was being lost. I switched over to an emergency back up tank (13 cu-ft ...

  • Likes: 60
  • View count: 14779
  • Dislikes: 17
  • Comments:
Tags: regulator fail,Zeagle regulator fail,Zeagle regulator,Zeagle.

Piston First Stage Disassembly and Reassembly

Ist Scuba Regulator

Have you ever wondered what the inside of your first stage looks like, well here is the inside of a piston (unbalanced) yoke style first stage. We encourage all divers to have their regulators serviced and over hall, by a certified technician, per the manufactures recommendations. http://www.yo...

  • Likes: 143
  • View count: 15046
  • Dislikes: 3
  • Comments:
Tags: Lake,Hickory,Scuba,Marina,Taylorsville,North,Carolina,Alexander,County,Diving,Drysuit,Wetsuit,BCD...

Best Masks - 2019

Ist Scuba Regulator

Best Masks - 2019 Shop Masks - https://www.simplyscuba.com/collections/masks Advice - https://www.youtube.com/playlist?list=PLsa9lHcC4ukkP95K-5EfvAinWBGttNVpS Visit our shop - https://www.simplyscuba.com/pages/scuba-shop ■ In this scuba advice episode Mark talks about some of the best masks to b...

  • Likes: 287
  • View count: 28441
  • Dislikes: 10
  • Comments:
Tags: simplyscuba,simply scuba,Simply,Scuba,#simplyscuba,scuba diving,scuba,diving,#scubadiving,Best,Ma...