KENNE BELL Supercharger Oil 8oz-Bottle -Synthetic-

KENNE BELL Supercharger Oil 8oz-Bottle

Compatible with al twin screw style superchargers. Includes the latest in oil technologies to keep our bearings and seals properly lubricated. It will work with Autorotor, Opcon, Kenne Bell, Lysholm, Eaton, Ubercharger, TRD, Magnuson, Jackson Racing, Magna Charger, and Whipple twin screw superchargers as well. If you do not see your sueprcharger on the list please ask and we can confirm. You may also check out our online parts store as well. Please follow the correct fill instructions for your supercharger and do not overfill it. Most supercharager failures occur due to heatrom over filing or under filling the head unit.

  • Brand: KENNE BELL
  • ASIN: B075KJKFL3
  • UPC: 049807106508

Canton Racing 80-242 Aluminum Tank for Kenne Bell Supercharger

Canton Racing 80-242 Aluminum Tank for Kenne Bell

This tank is made from .100 aluminum with two 1/2 inch NPT fittings on the side, a billet aluminum threaded neck to accept the standard threaded top, and two mounting provision holes on the bottom that allow you to mount it to the bracket supplied with the original Kenne Bell tank. The tank is made to be an exact replacement of the stock round plastic tank that is include with the Kenne Bell super charger systems with the liquid cool option.

  • Brand: Canton Racing Products
  • ASIN: B01C87FO8U
  • UPC: 013066004080

Kenne Bell Boost-A-Pump-40Amp 21V Competition KB89072 New Genuine

Kenne Bell Boost-A-Pump-40Amp 21V Competition KB89072 New

The new and improved time tested Kenne Bell BOOST-A-PUMP powers some of the world's most powerful production street and competition vehicles. Kenne Bell supercharger kits all use the BOOST-A-PUMP to reliably produce those big HP numbers on pump gas! It activates only at full throttle or boost so it doesn't bloat or overload the fuel system at idle or cruise where full time pumps and extra fuel are not required. The fuel is not heated (gasoline begins to boil @ 95 degrees). No cool can is necessary. It's much easier to install (cut a wire) and more reliable than twin fuel pumps. While dyno and street testing, on board data logger stated that the fuel flow was less at night when the lights, stereo etc...were on. The voltage to the pump was varying between 12 and 13.5 volts and fuel was being reduced up to 15%. Further testing in a fuel flow lab indicated that by elevating the voltage to the pump we could safely increase fuel capacity by as much as 50%. The Kenne Bell BOOST-A-PUMP does just that, it automatically maintains the pre-set voltage or % increase with as little as 10 volts at the battery. Kenne Bell, the innovators, have done it again! This is an ingenious, reliable yet simple solution to your fuel system needs. Imagine 50% more fuel delivery and horsepower without the has...

  • Brand: KENNE BELL
  • ASIN: B014Z157NY

Kenne Bell Boost A Pump - 40Amp - KB89069 Supercharged

Kenne Bell Boost A Pump - 40Amp -

SKU: KB89069 40 Amp-17.5V- The New and Improved time tested Kenne Bell BOOST-A-PUMP, powers some of the worlds most powerful production street and competition vehicles. Kenne Bellsupercharger kits all use te BOOST-A-PUMP to reliably produce those big HP numbers on pump gas. It activates only at full throttle or boost so it doesn't bloat or overload the fuel system at idle or cruise where full time pumps and extra fuel are not required.The fuel isnt heated (gasoline begins to boil @ 95 degrees) No col can is necessary and its mucheasier to install (cut a wire) and more reliable tan twin fuel pumpls. While dyno and street testing an On board Data Logger told us that the fuel flow was less at night when the lights,stereo etc...were on. The voltage to the pump was varying between 12 and 13.5 volts and fuel was being reduced up to 15%. Further testing in a Fuel Flow Lab indicated that by elevating the voltage to the pump we could safely increase fuel capacity by as much as 50%. The Kenne Bell BOOST-A-PUMP does just that, it automatically maintains thyhe preset voltage or % increase with as little as 10 volts at teh battery. Kenne Bell, the innovators, have done it again! This is an ingenious, reliable yet simple solution to your fuel system needs. Imagine 505 more fuel delivery and ho...

  • Color: Red
  • Brand: KENNE BELL
  • ASIN: B0145TJJJY

Canton Racing 80-242BLK Black Aluminum Supercharger Tank For Kenne Bell SC Powder coat

Canton Racing 80-242BLK Black Aluminum Supercharger Tank For

This tank is made from .100 aluminum with two 1/2 inch NPT fittings on the side, a billet aluminum threaded neck to accept the standard threaded top, and two mounting provision holes on the bottom that allow you to mount it to the bracket supplied with the original Kenne Bell tank. The tank is made to be an exact replacement of the stock round plastic tank that is include with the Kenne Bell super charger systems with the liquid cool option. Black wrinkle powder coat finish.

  • Brand: Canton Racing Products
  • ASIN: B07CBLJHQ5

TORQUE RUSH X-LINK INTERFACE MODULE 8 PIN TO 6 PIN DBW ADAPTER FOR 12605109 LS3

TORQUE RUSH X-LINK INTERFACE MODULE 8 PIN TO

This adapter allows the use of a LS3, LS7, L76, L99, L92, 6 pin electronic throttle body to be used on an older on a GM or GM Holden vehicle originally equipped with a 78mm 8 pin throttle body. Please make sure your throttle body has a GOLD blade. If your throttle body has a silver blade please see other auction. Applications: 2003 - 2006 and 2007 Classic Full -Size GM trucks, 2004 SSR, 2004-2005 Holden VZ LS1 vehicles. X-Link works with either truck 87mm(e.g. Trailblazer SS or 08+ truck) or car style(e.g.Corvette) 90mm throttle bodies. (GOLD BLADE ONLY) Features: Robust, all automotive class construction. Maintains the independence of the two throttle position sensor signals. Simple plug n play installation. Works with your original throttle actuator control (TAC) module and pedal assembly. Allows full throttle blade range to 100% wide open throttle. Get the full potential out of draw-through superchargers like the Magna Charger Radix or` TVS and the Kenne Bell and Whipple twin screws. Allows use of 90mm electronic throttle on L76, L92, TBSS and FAST intake / induction swaps. Simplifies L76, L92 and LS3 engine swaps into these vehicles. Less restriction and improved airflow for turbocharged or high output naturally aspirated applications. Smooth, crisp, more responsive throttle ...

  • Brand: CBM Motorsports
  • ASIN: B072YZNCCK

TORQUE RUSH X-LINK INTERFACE MODULE 8 PIN TO 6 PIN DBW ADAPTER FOR 12570790 LS2

TORQUE RUSH X-LINK INTERFACE MODULE 8 PIN TO

This adapter allows the use of a LS2 or LS7 6 pin electronic throttle body to be used on an older on a GM or GM Holden vehicle originally equipped with a 78mm 8 pin throttle body. Must be used with SILVER blade throttle body. Please see other auction for gold blade throttle body. Applications: 2003 - 2006 and 2007 Classic Full -Size GM trucks, 2004 SSR, 2004-2005 Holden VZ LS1 vehicles. X-Link works with either truck 87mm(e.g. Trailblazer SS or 08+ truck) or car style(e.g.Corvette) 90mm throttle bodies. SILVER BLADE ONLY Features: Robust, all automotive class construction. Maintains the independence of the two throttle position sensor signals. Simple plug n play installation. Works with your original throttle actuator control (TAC) module and pedal assembly. Allows full throttle blade range to 100% wide open throttle. Get the full potential out of draw-through superchargers like the Magna Charger Radix or` TVS and the Kenne Bell and Whipple twin screws. Allows use of 90mm electronic throttle on L76, L92, TBSS and FAST intake / induction swaps. Simplifies L76, L92, LS2 and LS3 engine swaps into these vehicles. Less restriction and improved airflow for turbocharged or high output naturally aspirated applications. Smooth, crisp, more responsive throttle operation.

  • Brand: CBM Motorsports
  • ASIN: B072YVSLTZ

ACDelco T41002 Professional Manual Timing Belt Tensioner

ACDelco T41002 Professional Manual Timing Belt

An ACDelco Professional, premium aftermarket Individual Timing Component includes automatic, manual, and hydraulic tensioners and idler pulleys, and is for those who want to replace individual parts. This premium aftermarket replacement individual timing component is manufactured to meet your expectations for fit, form, and function.

  • Brand: ACDelco
  • ASIN: B000IYY482
  • UPC: 021625876955

Hotchkis 20109 Chassis Max Strut Brace for Camaro 2010

Hotchkis 20109 Chassis Max Strut Brace for Camaro

Hotchkis Sport Suspension Camaro Chassis Max Strut Brace from Hotchkis Performance adds necessary rigidity to the Camaro by eliminating strut tower flex. It ties the strut towers together at four mounting points, offering maximum support in tension, compression and twist. It maximizes the performance gains from other chassis improvements like sport springs and sway bars. This product is a must for spirited street and track day driving. Fabricated from strong, lightweight 1-1/4 inch DOM steel tubing and 100 percent TIG welded with laser cut brackets and corner gussets, the brace is designed to fit over stock and Magnuson supercharged engines. Some drilling is required, and the brace bolts on in minutes. A unique reservoir relocation bracket is also included. Finished in durable semi-gloss black powder coat, the Chassis Max Strut Tower Brace includes installation hardware and detailed instructions. Like all Hotchkis Performance products the brace is designed, track tested and manufactured in the USA using domestic materials. for maximum performance results, use the brace in conjunction with the Hotchkis Track Pack for ultimate 5th Gen Camaro handling. Features Fabricated from strong, lightweight 1-1/4 inch DOM steel tubing with laser cut brackets and gussets. Four-point mounting sy...

  • Brand: Hotchkis
  • ASIN: B004I2BCIU
  • UPC: 012430005739

Boost A Pump 40 AMP with DIAL 17.5V

Boost A Pump 40 AMP with DIAL

SKU: KB89069 40 Amp-17.5V- With Dial! Exclusive to Lightning Force Performance. Some vehicles may not operate at 17.5 LFP has teamed up with Kenne Bell to offer you a solution, which allows for operation using lower voltage. The New and Improved time tested Kenne Bell BOOST-A-PUMP, powers some of the worlds most powerful production street and competition vehicles. Kenne Bellsupercharger kits all use te BOOST-A-PUMP to reliably produce those big HP numbers on pump gas. It activates only at full throttle or boost so it doesn't bloat or overload the fuel system at idle or cruise where full time pumps and extra fuel are not required.The fuel isnt heated (gasoline begins to boil @ 95 degrees) No col can is necessary and its mucheasier to install (cut a wire) and more reliable tan twin fuel pumpls. While dyno and street testing an On board Data Logger told us that the fuel flow was less at night when the lights,stereo etc...were on. The voltage to the pump was varying between 12 and 13.5 volts and fuel was being reduced up to 15%. Further testing in a Fuel Flow Lab indicated that by elevating the voltage to the pump we could safely increase fuel capacity by as much as 50%. The Kenne Bell BOOST-A-PUMP does just that, it automatically maintains thyhe preset voltage or % increase with as ...

  • Color: Red
  • Brand: KENNE BELL
  • ASIN: B075MPK2GD
  • UPC: 602573479025
Similar Kenne Bell Supercharger Results
Kenne Bell Supercharger Video Results

Hellcat Kenne Bell 4.7L Supercharger Install

Kenne Bell Supercharger

Share with a friend and subscribe SHIRTS: www.becauseracecarstore.com POSTERS: www.inshanedesigns.com Want to send a bag of weenies? PO BOX 542 Mt Juliet TN 37121-0542 Music: SHOCKA https://www.youtube.com/channel/UCEe-9K6_daBApyfkX-w2QvA 10% Off anything on www.auxbeam.com with code 'SRTMUSH...

  • Likes: 2344
  • View count: 109180
  • Dislikes: 94
  • Comments:
Tags: SRTMUSH,Hellcat,SRT DEMON,Dodge,SRT Hellcat,streetspeed717,tJ Hunt,Solomondrin,3d machines,vehicl...

Bad ass Mustang Cobra with Kenne Bell Supercharger

Kenne Bell Supercharger

This is a 2003 Mustang Cobra with a kenne bell super charger. quarter mile low 10's. and has 600+ horsepower. say good bye Supra,Corvettes,Vipers,Firebirds,Camaros. Oh and not to mension.. fucking rice cars. def. Honda. Honda blows.

  • Likes: 10854
  • View count: 6137814
  • Dislikes: 362
  • Comments:
Tags: Mustang,Cobra,Kenne,Bell,Fast,Car,2003,Racing,Burnout,Exhaust,Cars,Turbo,Camaro,Ford,Street,Corve...

Kenne Bell Supercharged F150 Drive.....Is it really quicker than a Corvette????

Kenne Bell Supercharger

We review a Kenne Bell supercharged 4x4 F150 to see if it really is quicker than a Corvette. This truck is amazing! Don't forget to check out our new sponsor for some awesome apparel. https://gentlemensdrivingclub.com/ Use code corvetteposse for 15% off your order! http://www.dbptuning.com/ma...

  • Likes: 409
  • View count: 41643
  • Dislikes: 74
  • Comments:
Tags: Corvette Posse,Corvette,F150,4x4,F150 4x4,kenne Bell,supercharged f150,supercharged mustang,super...

Kenne Bell Supercharger

Kenne Bell Supercharger

Since 1991, Kenne Bell has been the home of the record breaking rear inlet twin screw supercharger kit!

  • Likes: 31
  • View count: 5303
  • Dislikes: 0
  • Comments:
Tags: Supercharger,Liquid Cooled,Mustang,Camaro,Dodge,Hellcat,Demon,Cobra,Shelby,Kenne Bell

800hp Kenne Bell Powered 2015 Mustang GT

Kenne Bell Supercharger

Our customer's 2015 Mustang GT, fitted with our 800hp supercharger package. Kenne Bell 2.8L Liquid Cooled Mammoth, Billet oil pump gears and timing gear, cat-back exhaust, DSS half shafts, SVE forged wheels, Nitto tires, and lowering springs. 12.5psi on 93 octane, tuned by Lund Racing via nGauge.

  • Likes: 472
  • View count: 91314
  • Dislikes: 28
  • Comments:
Tags: 800hp Mustang GT,2015 Mustang GT,Boost Works,Kenne Bell,2.8L,Mammoth,S550