Professional Products 52060 Polished LS1 EFI Manifold

Professional Products 52060 Polished LS1 EFI

Professional Products Polished LS1 EFI Manifold features a polished finish. This manifold is the result of over one year of development and testing and has proven to provide significant increases in power. In direct comparison dyno tests against a factory LS6 intake manifold, the Typhoon produced 17.7 more horsepower at 6,200 RPM. It also makes more power and torque at low and mid-range engine speeds than other aftermarket manifolds. This design features a larger plenum volume, which makes the manifold suitable for larger displacement engines. The manifold has nitrous bosses positioned on the port runners and a 85 millimeter inlet. The manifold kit includes high volume fuel rails with stainless steel mounting brackets, stainless hardware, and a -6 AN stainless braided crossover hose. Additional fittings are also supplied that allows a connection to the stock fuel inlet line.

  • Brand: Professional Products
  • ASIN: B001FTG8QU
  • UPC: 665053520600

A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black

A-Team Performance Intake Manifold 102mm Throttle Body Sheet

A-Team Performance Intake Manifold 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black100% TIG Welded AluminumHardware Included3mm (1/8") Thick T6061 Sheet Aluminum ConstructionBlack Fuel RailsFuel Crossover LineIntake is about 2" taller than stockThis intake fits Cathedral Style LS1 LS2 LS6 4.8/5.3/5.7/6.0 Heads.FEATURES: Black Intake Manifold, Black Throttle Body, Gaskets, Hardware, Black Fuel Rails, and Fuel Crossover Line. Works on CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS-BASED) 4.8 L / 293 in3 (LR4) 5.3 L / 325 in3 (L33, L59, LM4, LM7) 5.7 L / 346 in3 (LS1, LS6) 6.0 L / 364 in3 (LQ4, LQ9, LS2) A-Team Performance parts are sold exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B076Z97CCW

BBK 5004 Compatible with Chevrolet GM LS1 High Performance SSI Series Intake Manifold - Titanium Silver Powder Coat Finish

BBK 5004 Compatible with Chevrolet GM LS1 High

BBK Titanium Silver Powder Coat SSI Intake Manifold for GM LS-1 is an improvement over the factory Z06 Corvette intake manifold. The BBK engineers have designed a unit that delivers 12-15 additional rear wheel horsepower on the already hot Z06 and 18-24 horsepower on the base LS-1 equipped GM models. Such highlights include a standard 85 millimeter straight through design throttle inlet and low restrictive rounded runners for maximum horsepower as well as improved low end torque for great street or strip performance. For additional power gains and value there is also an intake manifold kit with one of BBK 's popular Power Plus series performance throttle bodies.

  • Color: Titanium Silver
  • Brand: BBK Performance
  • ASIN: B000CIRAEE
  • UPC: 197975050045

Dewhel Engine LS Series Intake Manifold Bolts Kit SS Stainless Steel For LSX LS1 LS2 LS3 LS6 CAMARO CORVETTE GM

Dewhel Engine LS Series Intake Manifold Bolts Kit

A set of stainless steel intake manifold bolts for GM LS1, LS2, LS3, LS6, and LS7 Engines. These will fit all OEM and many aftermarket intake manifolds including FAST 92 & 102mm. OEM applications include all 1997-2014 Camaro, Firebird, Pontiac GTO, Cadillac CTS-V, and Corvette (excluding LT5 engines)

  • Brand: DEWHEL
  • ASIN: B071S48PQ9
  • UPC: 751499359178

VMS RACING RED 10.2mm High Performance Engine SPARK PLUG IGNITION WIRES Wire Set 32829 Compatible with 4.8L 5.3L 6.0L 6.2L VORTEC Chevy Chevrolet GMC Engines (Set of 8 Longer wires for Vortec TRUCKS)

VMS RACING RED 10.2mm High Performance Engine SPARK

VMS Racing 10.2mm Spiral Core Chevy & GMC Vortec Engine Truck Spark Plug Wires are Designed to surpass all other ignition wires on the market. Construction from INNER to OUTERMOST LAYER is as follows: All Kevlar Stranded INNER CORE, Ferrite EMI/RFI Suppression Element, Heavy Gauge Stainless Steel Conductor, Conductive Graphite Coating, High Density-High Temperature-High Durometer Pure Silicone Insulation, Fiberglass Braid concluding with a 600-degree Pure Silicone Jacket. All this technology consummating a 10.2mm THICK WIRE that will outperform all other wires at a fraction of the cost. The breakdown of the technology used is: 1- 100% PURE SILICONE insulating jacket is made of TC-1500-HS high strength aerospace silicone rubber. Able to withstand 600 degrees ! PERFECT FOR HEADERS! 2 - LOW RESISTANCE - EMI AND RFI SUPPRESSED: 2.5MM conductor with stainless steel wound at 200 turns per inch. Just .5K OHMS per foot. Lowest Resistance possible while maintaining necessary RFI suppression. NO MORE HEARING YOU ENGINE THROUGH THE RADIO! 3- Stainless Steel TRIPLE crimped terminals snap lock terminals! Most wires are single-crimped, better ones are double crimped, VMS Racing wires are TRIPLE-CRIMPED! NO MORE PULLING THE PLUG BOOT & RIPPING TERMINAL OUT OF THE WIRE! 4- PERMANENTLY BONDED & S...

  • Color: red
  • Brand: VMS RACING
  • ASIN: B01LICOCTS
  • UPC: 746839061941

BBK 5018 High Flow Performance Billet Aluminum Fuel Rail Kit for Chevrolet, GM LS1

BBK 5018 High Flow Performance Billet Aluminum Fuel

BBK Billet Aluminum High-Flow Fuel Rail Kit for GM LS-1 features the "SSI-Series" intake manifold for the 1986-1993 5.0L Mustang. The BBK engineers found that the small steel factory fuel rails leave much to be desired. This resulted in the development of our current high flow aluminum fuel rails that are included in many of our performance intake manifolds as standard equipment. While developing these fuel rails - the BBK team also made sure that these units would work stock or on other aftermarket intake manifolds so enthusiasts could get the same great performance and value that they deliver. It is built from lightweight aluminum where each rail is CNC machined to precise tolerances. It has blue anodized for maximum performance and longevity.

  • Color: Red
  • Brand: BBK Performance
  • ASIN: B001G8MOKY
Similar Ls1 Ssi Intake Manifold Results
Ls1 Ssi Intake Manifold Video Results

BBK Performance SSI Series LS1 Intake Corvette Throttle Body Exhaust Headers Cold Air Intake

Ls1 Ssi Intake Manifold

BBK Performance Parts SSI Series LS1 Intake Manifolds Corvette Throttle Body Exhaust Headers Cold Air Intake C5 C6 Review http://www.jegs.com/p/Chevrolet-Performance/GM-Goodwrench-350ci-260HP-Engine-Packages/762313/10002/-1 Features Maximum Horsepower Improved Low-End Torque Hardware & Instructio...

  • Likes: 10
  • View count: 3256
  • Dislikes: 0
  • Comments:
Tags: JEGS,bbk,performance,parts,ssi,series,ls1,intake,manifold,manifolds,corvette,throttle,body,exhaus...

BBK Performance High Flow Billet Fuel Rails for a LS1 LS2 LS3 F Body Corvette

Ls1 Ssi Intake Manifold

BBK's high-flow billet aluminum fuel rail kits are designed to work with stock Ford injector angles and spacing. They will work on stock or aftermarket intake manifolds, so you can get the same great performance and value that they deliver. Recommended for higher horsepower applications where lar...

  • Likes: 11
  • View count: 6537
  • Dislikes: 1
  • Comments:
Tags: Chevrolet Corvette,GM LS Engine,cars,Chevrolet Corvette (C6),Racing,Summit Racing,how to install,...

Custom BBK LS intake part 2

Ls1 Ssi Intake Manifold

  • Likes: 32
  • View count: 1531
  • Dislikes: 4
  • Comments:
Tags:

Borelli Motor Sports: C5 Corvette w/ BBK Intake Setup

Ls1 Ssi Intake Manifold

www.borellimotorsports.com 408-770-1220 Borelli Motor Sports is a unique automotive shop that provides trusted and expert maintenance and performance modifications, race car rentals and services, and premier-class storage. Our knowledgeable technicians have a combined 75 years of experience and a...

  • Likes: 7
  • View count: 3697
  • Dislikes: 1
  • Comments:
Tags: race car preparation bay area race car preparation san jose high performance auto service,brake s...

Slp blackwing, bbk ssi intake , cammed ls1

Ls1 Ssi Intake Manifold

Under hood

  • Likes: 4
  • View count: 835
  • Dislikes: 0
  • Comments:
Tags: Bbk ls1