DEWALT DWASHRIR Impact Ready Shears Attachment

DEWALT DWASHRIR Impact Ready Shears

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

  • Brand: DEWALT
  • ASIN: B01BSAWORC
  • UPC: 885911413749

WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

WEN 3650 4.0-Amp Corded Variable Speed Swivel Head

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

  • Brand: WEN
  • ASIN: B01M5G99E7
  • UPC: 044459036500

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear

Genesis GES40 4.0 Amp Corded Swivel Head Variable

The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor. - 4.0 Amp Motor-360° Swivel Head for cutting curves in sheet metal-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge-Three blades work to reduce metal deformation-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel Genesis' two year warranty means you buy with confidence.

  • Brand: Genesis
  • ASIN: B01LZ7HCRC
  • UPC: 811285020665

Wiss METALMASTER M3R 9-3/4" Compound Action Snips, Straight, Left, Right

Wiss METALMASTER M3R 9-3/4" Compound Action Snips, Straight,

Crescent Wiss has taken the aviation snip to the next level with the advanced metal Master aviation snips. The precision-cast molybdenum blades have cnc-ground Serrations which allow for more uniform Serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free-float design. The spring-action design allows for fast, effortless feed. The all-new latch design provides ergonomic single-handed operation for left or right handed users. New extended non-slip handle grips give users better control while cutting. The new generation of Crescent Wiss metal Master will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional aviation snips. They are available in left/straight cut, Right/straight cut, and straight cut.

  • Color: Multi
  • Brand: Wiss
  • ASIN: B00002N5KQ
  • UPC: 777786218126

Finder 12" Aviation Snips, Long Straight Cut Tin Snips Cutting Shears Power Cutter with CR-V Blade & Comfortable Grip, 300mm Scissors for Cutting Metal Sheet, Hard Meterial, Industrial Quality

Finder 12" Aviation Snips, Long Straight Cut Tin

Finder 12" Straight Cut Aviation Snips, Made of Premium Quality Materials, Advanced Technology and Superb Craftsmanship. We Specially Produce Professional Tools & DIY Supplies with Industrial Quality. Choose Finder, Choose the Best! Features: 300mm aviation tin snip is specially designed to cut hard materials, aluminium, sheet metal, plastic plates, wire mesh, copper, leather and etc. Suitable for cutting straight and wide curving to the left and right, and can be easily used in either hand. Manufactured from drop forged carbon steel and heat treated for increased durability. Ergonomic grips with slip guards to protect knuckles & fingers. Safety Lock - All metal closed switch lock, to prevent accidental injury, improve safety. Serrated cutting edges prevent materials from slipping during use. Compound leverage for maximum cutting power for significantly less fatigue. Specifications: Brand: Finder Material: Chrome vanadium steel Special Type: Straight cutter aviation snip Common Type: Multi-purpose Scissors Color: Orange and Black Handle Material: Rubber DIY Supplies: Metalworking and shearing size: 300mm / 12 inch, 285*60mm Package included: 1 x Straight Cut Aviation Tin Snip

  • Color: black and orange
  • Brand: FINDER
  • ASIN: B07H79ZGLQ

IRWIN Tools Tinner's Snip, Flat Blade, 12-inch (22012)

IRWIN Tools Tinner's Snip, Flat Blade, 12-inch

This IRWIN Flat-Blade Snip Tool cuts up to 20-gauge cold-roll steel and 22-gauge stainless-steel. The precision-ground edges on these tin snips ensure a tight grip on each cut for superior cutting quality, and their hot, drop-forged steel blades provide maximum strength and long life. Cut straight and wide curves with the flat-blade design of these snips.

  • Brand: Irwin Tools
  • ASIN: B00004Z0A5
  • UPC: 038548220123

DEWALT DW890 18 Gauge Swivel Head Shear

DEWALT DW890 18 Gauge Swivel Head

  • Color: Yellow
  • Brand: DEWALT
  • ASIN: B00004RHIU
  • UPC: 028875008907

Wild Edge Electric Metal Shear, 5.0 Amp Variable Speed Swivel Head 14 Gauge Electric Metal Shear

Wild Edge Electric Metal Shear, 5.0 Amp Variable

Wild Edge SEMS5A Variable Speed swivel head Electric metal sheer cuts through variety of metal sheets with a 5. 0 amp motor. This tool is designed for a high-volume work load and the high polish die-cast machine head rotates a 360 degrees to allow for cutting at any angle or direction without having to have an uncomfortable grip. This precision tool will cut Regular 15 gauge stainless steel or 14 gauge sheet metal smoothly. Also Wild Edge will supply you one year of this product to help you improve your shopping experience.

  • Color: Cup-moelFG807
  • Brand: Wild Edge
  • ASIN: B07K748QJX
  • UPC: 856594007051

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

Malco TS1 Turbo Shear 20 Gauge Capacity Sheet

  • Color: NA
  • Brand: Malco
  • ASIN: B0000AQK7C
  • UPC: 686046530208

MIDWEST Aviation Snip Set - Left and Right Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6510C

MIDWEST Aviation Snip Set - Left and Right

Midwest Snips, made in the USA, forged blade offset model aviation snips are the world's best! We offer three different blade pattern models and two blade hardness options in this product category as well as two tradesmen sets. These models perform superior to respective model ASME Performance Requirements.Our offset model aviation snips are "The Sheetmetal Tradesman's Choice" because they are truly the easiest models to use in a variety of sheetmetal cutting applications. The offset blade pattern flows material away from the blades. This allows the snip to move forward without interference when making cuts through long sheets. It also allows the snip to cut tighter curves than other blade pattern models. The left and right blade pattern models cut the tightest curves while the straight blade pattern offers a slightly longer length of cut. Features New KUSH'N-POWER Grips.

  • Color: Left and Right Combo
  • Brand: Midwest Tool & Cutlery
  • ASIN: B00OCGQG3S
  • UPC: 727226130334

Malco TSCM Corrugated Metal Turbo Shear

Malco TSCM Corrugated Metal Turbo

The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts, and circular or square outlet holes, in large or small corrugated patterns and other non-standing-seam panels including trapezoidal (box) profiles. Elongated offset blades with compact jaws allow the drill handle or battery pack to clear the roofing panel surface as the TSCM head follows the rising angle of corrugations and other angled profiles. A sleek, lightweight aluminum-cast shear head and compact molded polymer drill clamp allows maximum portability and ease to go wherever the work is. The shear can operate at high or low speeds for the control you need to follow a precise cut line. Hardened carbon steel blades combine to offer long service life in 30 to 24-gauge (0.31 - 0.61 mm) roofing panel metal. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades TSCMRB

  • Color: N/A
  • Brand: Malco
  • ASIN: B00IMJDNKK
  • UPC: 686046542317

TruePower 01-0161 Heavy-Duty Electric Metal Shear with Swivel Head

TruePower 01-0161 Heavy-Duty Electric Metal Shear with Swivel

The Variable Speed Electric Head Shear is designed for a high-volume work load and delivers on all fronts. Cutting up to 150-Inch per minute, this shear cuts both sheet and steel metal with equal ease. with its variable speed function, you control the timing and precision of your cuts; guaranteeing a job-well-done each and every time.

  • Brand: TruePower
  • ASIN: B007XC0I0U
  • UPC: 870208001617

MIDWEST Power Cutters Long Cut Snip - Straight Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6516

MIDWEST Power Cutters Long Cut Snip - Straight

Offset long cut aviation Snip, forged blade, forged Glide tech blades provide long cutting life with sharpest blades, wide blade opening, 3" length of cut & optimal 40 serrations per inch to bottom blade for secure grip of irregular surface materials such as ribbed metal roofing & siding, vinyl siding nail lip, cushion grip handles, meets or exceeds all ANSI requirements.

  • Brand: Midwest Tool & Cutlery
  • ASIN: B00OCGQJDA
  • UPC: 727226130341

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment

Turboshear metal cutting attachment Shear, heavy duty, suitable for use with: 14.4 V 3/8 in cordless or corded drill, 16 mild/18 GA cutting capacity, steel, galvanized, for ferrous and non-ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets.

  • Brand: Malco
  • ASIN: B0002894R0
  • UPC: 796084322311

Makita JS1602 Shear

Makita JS1602

Makita's Powerful 3.3 amp motor delivers 4,000 SPM for the most demanding applications. Built in thickness guage for added convenience. Engineered for continus operation 16 gauge mild steel and 18 gauge stainless steel. Large easily replaceable bladeswith 8 cutting edges each.

  • Color: Blue
  • Brand: Makita
  • ASIN: B00B7BHM8E
  • UPC: 088381634120

Vintaj Metal Cutting Shear with Spring, 7-Inch (1.5" cutting blade)

Vintaj Metal Cutting Shear with Spring, 7-Inch (1.5"

Cuts easily through Altered Blanks and Altered Blank Canvas up to 20 gauge thick. Features 1.5" long straight cutting blades Single-leaf spring for added comfort and ease of use Locking mechanism for safe storage.

  • Color: Original Version
  • Brand: Vintaj
  • ASIN: B00HUJ0DZG
  • UPC: 790524203932

Finder Aviation Snips, 10" Straight Cut Tin Snips Cutting Shears with CR-V Blade & Comfortable Grip, 250mm Scissors for Cutting Metal Sheet, Hard Meterial Cutter, Industrial Quality

Finder Aviation Snips, 10" Straight Cut Tin Snips

Finder 10" Straight Cut Aviation Snips, Made of Premium Quality Materials, Advanced Technology and Superb Craftsmanship. We Specially Produce Professional Tools & DIY Supplies with Industrial Quality. Choose Finder, Choose the Best! Features: 250mm aviation tin snip is specially designed to cut hard materials, aluminium, sheet metal, plastic plates, wire mesh, copper, leather and etc. Suitable for cutting straight and wide curving to the left and right, and can be easily used in either hand. Manufactured from drop forged carbon steel and heat treated for increased durability. Ergonomic grips with slip guards to protect knuckles & fingers. Safety Lock - All metal closed switch lock, to prevent accidental injury, improve safety. Serrated cutting edges prevent materials from slipping during use. Compound leverage for maximum cutting power for significantly less fatigue. Specifications: Brand: Finder Material: Chrome vanadium steel Shape:Crane Special Type: Straight cutter aviation snip Common Type:Multi-purpose Scissors Color: Orange and Black Handle Material: Rubber DIY Supplies:Metalworking and shearing Maximum cutting capacity for cold rolled metal sheet: 1.2mm Maximum cutting capacity for stainless steel sheet: 1mm Package included: 1 x Straight Cut Aviation Tin Snip

  • Color: black and orange
  • Brand: FINDER
  • ASIN: B07H7BW3RB

KAKA Industrial HS-12 12-Inch Sheet Metal Plate Shear, Solid Steel Frame, Mounting Type Metal Shear, High Precision Manual Hand Plate Shear

KAKA Industrial HS-12 12-Inch Sheet Metal Plate Shear,

KAKA Industrial 12-Inch Sheet Metal Plate Shear Overview KAKA Industrial 12-Inch hand metal shear is an ideal tool for cutting metal plate, round steel and flat bar shearing. It equips with a blade length of 12-inch and features with cast iron steel frame, long steel handle and high precision cutting capability. Just A Simple Click, You Will Own A High Cutting Capacity, Solid Steel Frame, Hardened Carbon Steel Blade 12-Inch Metal Shear The cutting capacity of this metal shear is highest among the hand shear series; it can cut sheet steel at 3/16", flat steel at 2-3/4x3/16-inch and round steel at 1/2-inch. Moreover, this metal shear has a solid steel frame and a hardened carbon steel blade will increase the durability of this metal for a long time. It would be a smart choice for your workshop. More importantly, this metal shear is equipped with a long handle that will increase the flexibility and easiness since the long handle will give you more freedom and free your back pain. It is overall a great purchase at such a competitive price! Specifications Model: HS-12 Blade Length: 12-Inch Sheet Steel: 3/16" Flat Steel: 2-3/4x3/16"Round Steel: 1/2" Shipping Weight: 62 lbs Warrant: 1-Year 1.Kaka Industrial will accept returns on any unopened product within 30 days of the original ship ...

  • Color: Gray
  • Brand: KAKA INDUSTRIAL
  • ASIN: B015LJCOK8
  • UPC: 745369240161

Finder 10'' Straight Cut Aviation Snips, Scissors for Cutting Hard Meterial, Metal Sheet Cutter

Finder 10'' Straight Cut Aviation Snips, Scissors for

★ Ideal for cutting hard material: aluminum, sheet metal, leather, floor covering, card board and plastic. ★ Ergonomic designed PVC handle, comfortable grip ★ Anti-rust CRV steel, hard and endurable ★ Heat-treated blade, sharp and hard ★ Safety lock between the handlesFeatures: Adopt stainless steel cutter head, strong shearing, anti-rust, and endurable. Safety Lock - easy open/close lock for convenient security system. Serrated cutting edges prevent materials from slipping during use. Ergonomic designed PVC handle, comfortable grip. Compound leverage multiplies handle force to cutting blades by 8:1 for significantly less fatigue. Ideal snips for cutting aluminum, vinyl siding, screening, cardboard, leather and copper. Specifications: Brand: Finder Material: Carbon steel Type: Straight head Color: Orange and Black Total length: 255mm The length of blade edge: 47mm Head width: 46mm Handle length: 108mm Weight: 364g Package included: 1 x Aviation Tin Snip

  • Brand: FINDER
  • ASIN: B076GG9WWR

Milwaukee 6852-20 18-Gauge Shear

Milwaukee 6852-20 18-Gauge

6852-20 Shear 18Ga. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.

  • Brand: Milwaukee
  • ASIN: B000EP499E
  • UPC: 045242059430
Similar Metal Shears Results
Metal Shears Video Results

Cutting Metal with Electric Shears & NEW Throatless Electric Shears!

Metal Shears

Great ways to cut metal with Eastwood tools. Get Shears: http://www.eastwood.com/electric-metal-cutting-shears.html?utm_source=youtubeLIVE&utm_medium=annotation&utm_campaign=2017-04-05&utm_content=electric%20shears The Eastwood Electric Metal Shears with rotating jaws slices easily through ste...

  • Likes: 294
  • View count: 80602
  • Dislikes: 31
  • Comments:
Tags: Eastwood,east wood,east,wood,electric shears,electric metal shears,electric,shears,metal,metal sh...

You Need This Tool - Episode 108 | Heavy Duty Electric Sheet Metal Shears

Metal Shears

Shears - https://amzn.to/2sBBrOM The Other Shears - https://amzn.to/2RTrfPO The Tools I Use - https://www.amazon.com/shop/thefabforums On this episode of You Need This Tool I feature the heavy duty electric sheet metal shears. Welcome to The Fab Forums. My name is Kyle Voss and I produce Custom...

  • Likes: 452
  • View count: 13219
  • Dislikes: 23
  • Comments:
Tags: the fab forums,b is for build,cleetus,hoonigans,adam lz,tj hunt,boosted boiz,you need this tool,s...

Heavy Duty Sheet Metal Shears/Tin Snips Review & Comparison

Metal Shears

Here we are with a basic review and comparison of sheet metal shears and tin snips from Wiss, Crescent, Malco, Stanley, Harbor Freight

  • Likes: 55
  • View count: 3242
  • Dislikes: 3
  • Comments:
Tags:

harbor freight shear

Metal Shears

We check out the Harbor freight 14 gauge swivel head metal shear.

  • Likes: 102
  • View count: 77183
  • Dislikes: 25
  • Comments:
Tags: Harbor Freight Tools (Business Operation)

Dewalt Sheet Metal Cutter Review - DWASHRIR

Metal Shears

This is a review of the Dewalt Sheet Metal Cutter tool. I picked this up a while ago and used it a few times and so far I really like it. Makes cutting thin metal so much easier. Model - DWASHRIR - https://amzn.to/2SmuYmq My Instagram https://www.instagram.com/therealandreww/

  • Likes: 96
  • View count: 20961
  • Dislikes: 15
  • Comments:
Tags: Dewalt Sheet Metal Cutter Review,dewalt tools,dewalt sheet metal cutter,dewalt DWASHRIR,how to cu...