Non-Slip Performance Accelerator & Brake Aluminum Pedal Covers Pads for Tesla Model S and Model X, Set of 2, by MECHCOS

Non-Slip Performance Accelerator & Brake Aluminum Pedal Covers

Tips: Since the original Tesla pedals is thin and small,so our rubber need to maintain a certain degree of hardness, to ensure that our pedals firmly installed on the original car pedals. Hot water and car panel tools are helpful in your installation. Material: Aluminum alloy with raised rubber sectioning Compatible Vehicles: Left Hand Drive Models Only! Tesla model S and Model X 2012-2017 Package included: 2x Stainless Steel Pedals, 1 Fuel Gas Accelerator Pedal Cover and 1 Brake Pedal Cover.

  • Color: Tesla Pedals Pads
  • Brand: MECHCOS
  • ASIN: B079CZSS7V
  • UPC: 610521360226

HDE 2 Piece Non Slip Pedal Kit Gas Brake Cover Pads for Automatic Transmission Vehicles (Chrome and Black)

HDE 2 Piece Non Slip Pedal Kit Gas

Did you just get a new car? Maybe you want to spice up your old car? This silver and black pedal kit is designed for automatic transmissions, and will allow you to add some flare to the driver's side!HDE is a registered trademark and is the only authorized seller of HDE branded products

  • Color: Black and Silver
  • Brand: HDE
  • ASIN: B009CYGBHG
  • UPC: 797734244755

DIDEMI Non-Slip Car Pedal Kick Panels Treadle Foot Brake Cover Pad Accelerator Pedals for Manual Auto Vehicle

DIDEMI Non-Slip Car Pedal Kick Panels Treadle Foot

This is a set of 3 non-slip pedal pads. Material:PVC/Aluminum Color:Red,Blue,Silver Size Approx: 15cm*7.7cm/5.90*3.03" (L x W) for accelerator pedal pad 10cm*6.7cm/3.93*2.63" (L x W) for brake pedal pad 10cm*6.7cm/3.93*2.63" (L x W) for clutch pedal pad Four screw positions wide 4.5cm/1.77" Package included: 1x Set Car Foot Pedal(3 Pcs) Includes: 1pc Accelerator Pedal Cover 1pc Brake Pedal Cover 1pc Clutch Pedal Cover Installation: 1 Fit straps with screw and nut on each pedal pad. 2 Fit straps with screws and nuts on each pedal pad.Then place the pedal pad in the right position to fold the straps around the original pedal. 3 Now fold the straps tight around the original pedals.Use the pliers sand rags to fix the straps real tight so they cannot move anymore. 4 Check if straps can be folded around the pedals. Warm Tips: Compatibility is only Reference,before you buy,please check your Car Foot Pedal's size.For screw position about 4.5cm wide.

  • Color: Blue
  • Brand: DIDEMI
  • ASIN: B072M9MHJ8

Amooca New Non-slip Heavy duty Alloy Aluminum Aotomatic Fuel Brake Foot Rest AT Pedals For Audi A4 A5 A6 A8

Amooca New Non-slip Heavy duty Alloy Aluminum Aotomatic

Product Advantages : - Improve overall driving experience - Increase responsiveness and clearer feedbacks - Non slip design Package Includes: (One AT Pedals Set 3PCS) All necessary Bolts and Nuts Note: Drilling is required to install -Installation may involve certain modifications to the OEM fittings. -Should you are not comfortable working on your vehicle, please seek professional installers for installation. -Suitable for Left Hand Drive ONLY

  • Brand: Amooca
  • ASIN: B00O9YIOE2
  • UPC: 702029298870

JessicaAlba Stainless Steel No Drill and Non Slip Footrest Pedal Pad Sticker For BMW F30 F31 316i 318d 320i F20 F21 3 series

JessicaAlba Stainless Steel No Drill and Non Slip

Description: The Performance Stainless Steel Pedal Covers match the new design of the M footrest make a striking addition to the foot well. The asymmetric, three dimensional design of the rubber sections gives the foot well a truly dynamic feel. The pronounced rubber profiles of the brake and gas pedals offer good grip and protect against slipping. ▲Facelift Pedale Set : Gas Brake Footrest pedal ▲Description: Top quality. Left-Hand-Drive Models Only !!! Color : real pictures shown in the listing. Compatible with (Automatic Transmission): New 1 series 3 series all models ▲ Feature: - Brand new!!! - Easy to install -Easy Plug&Play Installation for gas and brake, -tape adhensive for footrest pedal ▲ Package included 1x Stainless Steel Pedal

  • Brand: JessicaAlba
  • ASIN: B01EWSRAMG

Fochutech 3 Pcs Nonslip Pedal Foot Brake Accelerator Cover Set for Car Auto Vehicle Automatic Aluminium (Red)

Fochutech 3 Pcs Nonslip Pedal Foot Brake Accelerator

This is a set of 3 non-slip pedal pads. Material:PVC/Aluminum Color:Red,Blue Size Approx: 15cm*7.7cm/5.90*3.03" (L x W) for accelerator pedal pad 10cm*6.7cm/3.93*2.63" (L x W) for brake pedal pad 10cm*6.7cm/3.93*2.63" (L x W) for clutch pedal padFour screw positions wide 4.5cm/1.77" Package included: 1x Set Car Foot Pedal(3 Pcs) Includes: 1pc Accelerator Pedal Cover 1pc Brake Pedal Cover 1pc Clutch Pedal Cover Installation: 1 Fit straps with screw and nut on each pedal pad. 2 Fit straps with screws and nuts on each pedal pad.Then place the pedal pad in the right position to fold the straps around the original pedal. 3 Now fold the straps tight around the original pedals.Use the pliers sand rags to fix the straps real tight so they cannot move anymore. 4 Check if straps can be folded around the pedals. Warm Tips: Compatibility is only Reference,before you buy,please check your Car Foot Pedal's size.For screw position about 4.5cm wide.

  • Color: Red
  • Brand: Fochutech
  • ASIN: B01N7AQKJJ
  • UPC: 756894452684

3pcs Non-Slip Racing Manual Car Truck Pedals Pad Cover Set Red

3pcs Non-Slip Racing Manual Car Truck Pedals Pad

Description: Creative and Fashionable DesignFit for most types of MT carsEasy installation, and to reduce the fatigue during drivingFit Model: Manual Transmission (MT)Material: Stainless SteelColor: Red and BlackAccelerator Pad Cover: Approx. 14.7cm*7.6cm/5.8"x3.0"Brake/Clutch Pedal Cover: Approx. 8.8cm*6.5cm/3.5"x2.6" Note: If the pedals still loose after installation, please check and install again.If the pedals tangle with the mat or the sidewall, they will not work well and even bounce back. At that time, you should loosen screws to remove pedals.Between the pedals and sidewall, keep no less than 5 mm space, so that the pedals can work freely and it can avoid dangers.Please check your pedal size before buying. Package Includes: 1 x Accelerator Pad Cover1 x Brake Pedal Cover1 x Clutch Pedal Cover1 set of Screws Accessories

  • Brand: Generic
  • ASIN: B00X5EQMFU
  • UPC: 630125590874

MagiDeal Brake Accelerator Sport NonSlip Pedal Pad Vehicle Automatic AT Car Red

MagiDeal Brake Accelerator Sport NonSlip Pedal Pad Vehicle

Description:Creative and Fashionable DesignFit for most types of AT carsEasy installation, and to reduce the fatigue during drivingFit Model: Automatic Transmission?AT)Material: Stainless Steel and RubberColor: Red and BlackAccelerator Pad Cover: Approx. 6"x 3"(15cmx7.5cm)Brake Pedal Cover: Approx. 5"x3.4" (13cmx8.7cm)Note:If the pedals are still loose after installation, please check and install again.If the pedals tangle with the mat or the sidewall, they will not work well and even bounce back. At that time, you should loosen screws to remove pedals.Between the pedals and sidewall, keep no less than 5 mm space, so that the pedals can work freely and it can avoid dangers.Please check your pedal size before buying.Package Includes:1 x Accelerator Pad Cover1 x Brake Pedal Cover1 Set of Screws Accessories

  • Color: Red
  • Brand: Generic
  • ASIN: B00X5EL8GS
  • UPC: 645038591375

Topfit Topfit Non-Slip Performance Foot Pedal Pads for Model S and Model X, Auto Aluminum Pedal Covers(A Set of 2)

Topfit Topfit Non-Slip Performance Foot Pedal Pads for

Features: Condition: 100% Brand New Material:Aluminum alloy with raised rubber sectioning Package Included: 1.One pedals for the accelerator 2.One pedals for the brake Topfit Brand Story: Founded by a super Tesla fan and also Tesla owner, Topfit is a factory outlet created mainly to serve the Tesla community, by provide cool Tesla accessories for your amazing Tesla car. The boss of the factory is a super Tesla fan and a science male designer, owned his model s 85 at the year of 2014, and had his model X 90D at July 2016. Our team tested every product again and again on our boss' car then we will push to the market, for each products, we improved at least twice, the size is accurate we tested it on our model s and model x many times, just trying to bring a better driving experience for Tesla owners. Hope you will like the things we made.warming tips:IF you need the video for the installation.Please contact the CS.

  • Brand: Topfit
  • ASIN: B073F64B9X

Topzone Universal Non-Slip Automatic Car Vehicle Auto Brake Gas Pedals Cover Set Black

Topzone Universal Non-Slip Automatic Car Vehicle Auto Brake

How to Install: Fit straps with screws and nuts on each pedal pad. Then place the pedal in the right position to fold the straps around the original pedal. Fold the straps tight around the original pedals. Use the pliers sand rags to fix the straps real tight so they cannot move anywhere. Check if straps can be folded around the pedals. Important: The pedal is an important functional part of your car. When installing this product please make sure to read the instruction manual provided in the package in order to prevent accidents.

  • Color: black
  • Brand: Topzone
  • ASIN: B07549QPZ1
  • UPC: 817082020549
Similar Non Slip Pedal Results
Non Slip Pedal Video Results

How to easily install pedal covers

Non Slip Pedal

I got these on the Geek app for $5 w/ shipping. They installed easily on my 95 Mitsubishi Eclipse and look pretty good. Music by: Danse Macabre - Isolated Harp by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http:...

  • Likes: 478
  • View count: 100841
  • Dislikes: 37
  • Comments: 43
Tags: pedal cover,geek app,how to,install,pedal,covers,how to install,youtube,easy,mitsubishi,eclipse,c...

How to put on pedal covers

Non Slip Pedal

How to put on pedal covers. Answer for UndercoverNinjaGirl

  • Likes: 83
  • View count: 62566
  • Dislikes: 141
  • Comments: 16
Tags: How-to,car,caleb,auto,help,Automobile (Industry),Cover,Tips,Singing,Crash,Accident,Police,Chase,s...

Hack How to Car Pedal Replace using Universal set VW Jetta

Non Slip Pedal

Replacement of car pedals, using universal kit, and how to adjust the bolts to fit. If this method does not work for you, the other holes in the pedal can be used. With a larger flat head bolt in order for the bolt. Subscribe, Like and Share Thank you for watching.

  • Likes: 100
  • View count: 59885
  • Dislikes: 58
  • Comments: 12
Tags: Volkswagen Passenger Cars (Automobile Company),Volkswagen Jetta (Automobile Model),Auto Show (Eve...