Parts2O FPW217-180B Tank Float Switch

Parts2O FPW217-180B Tank Float

Tank Float Switch.

  • Brand: Parts2O
  • ASIN: B009ZTV54M
  • UPC: 022315146969

Float Switch w / 10 ft. (3 Meter) Cable, Water Tank, Sump Pump

Float Switch w / 10 ft. (3 Meter)

This dual purpose float switch can be used for both emptying and filling operations. - Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage - 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications - Environmental friendly (Mercury Free) - suitable for use in septic, sump, and potable water applications - Cable Weight is not to be used in Potable Water-Built with a Honeywell Micro switch, rated for 100,000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Includes adjustable counterweight. - Manufactured in Argentina - Three year warranty - Constructed with non-toxic polypropylene - Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm) - Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C) - CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001) - Reinforced Double O Ring Cable Entry Review online instructions at bit.ly/FloatSwitch

  • Brand: Sump Alarm
  • ASIN: B00H61SO68
  • UPC: 661799381970

SJE Rhombus 1016212 SJE Milliamp Master Control Switch Wide Angle, Normally Closed, Pipe Clamp

SJE Rhombus 1016212 SJE Milliamp Master Control Switch

This wide-angle or narrow-angle control switch offers reliable low current control for AC and DC applications in water, wastewater, and sewage. The internal switching mechanism has sealed gold cross-point contacts for reliable low current operation. Common applications include PLC (programmable logic controller) panels, IS panels with intrinsically safe barriers, low current solar applications, and other low current control panels and alarms applications. The wide-angle version activates/deactivates approximately 4" (10.16 cm) above and below horizontal with a 3.5" (9 cm) tether. The narrow angle version activates/deactivates at approximately 1.5" (3.81 cm) above and below horizontal with a 3.5" (9 cm) tether. It is not sensitive to rotation. Normally Closed Model (low level)The control switch turns on (closes) when the switch drops below horizontal signaling a low level, and turns off (opens) when the switch tips above horizontal.

  • Brand: SJE Rhombus
  • ASIN: B01G8UJIBC

Float Switch w / 10 ft Cable, Septic System, Sump Pump, Water Tank

Float Switch w / 10 ft Cable, Septic

This dual purpose float switch can be used for both emptying and filling operations. - Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage - 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications - Environmental friendly (Mercury Free) - suitable for use in septic, sump, and potable water applications - Cable Weight is not to be used in Potable Water- Built with a Honeywell Micro switch, rated for 100,000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Includes adjustable counterweight. - Manufactured in Argentina - Three year warranty - Constructed with non-toxic polypropylene - Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm) - Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C) - CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001) - Reinforced Double O Ring Cable Entry Review online instructions at bit.ly/FloatSwitch

  • Brand: Sump Alarm
  • ASIN: B0064BHEVM
  • UPC: 661799381901

SJE PumpMaster Plus Mechanically-Activated Pump Switch SJE 1003265 20' Cord (Normally Closed/Pump Up)

SJE PumpMaster Plus Mechanically-Activated Pump Switch SJE 1003265

U.S. Patent No. 5,087,801 and 5,142,108. Features: Heavy-duty contacts. Controls pumps up to 3/4 HP at 120 VAC and 2 HP at 230 VAC. Adjustable pumping range of 18 -91 centimeters (7 - 36 inches). Without a plug for direct wiring in 120 VAC or 230 VAC applications. 20 foot cable. UL Recognized, CSA Certified. Specifications: CABLE: Flexible 14 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE) FLOAT: 7.75 centimeter diameter x 9.04 centimeter long (3.05 inches diameter x 3.56 inches long) high impact, corrosion resistance, PVC housing for use in sewage and water up to 60oC (140oF) ELECTRICAL: 120 VAC 50/50 Hz Single Phase: Maximum Pump Running Current: 15 amps Maximum Pump Starting Current: 85 amps Recommended Pump HP: 1492 W (1 HP) or less NOTE: This switch must be used with pumps that provide integral thermal overload protection.

  • Brand: SJE Rhombus
  • ASIN: B01JQ60A7Q
  • UPC: 762022552324

10 Ft Piggyback Float Switch Cable, Septic System, Sump Pump, Water Tank

10 Ft Piggyback Float Switch Cable, Septic System,

This piggyback float switch controls your pump and is wired for emptying operations. - Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage - 12 VDC motor loads up to 13.3 Amps. Contact us for other DC Applications - Environmental friendly (Mercury Free) - suitable for use in septic, sump, and potable water applications - Built with a Honeywell Micro switch, rated for 100,000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Manufactured in Argentina - Two year warranty - Constructed with non-toxic polypropylene - Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm) - Rated for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C) - CE Marked, IP68 Rated, tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001) - Reinforced Double O Ring Cable Entry Review online instructions at docs.sumpalarm.com/Piggyback_Float_Instructions-r0116.pdf

  • Color: Red
  • Brand: Sump Alarm
  • ASIN: B01BEHQVEQ
  • UPC: 784672970693

Little Giant 599117 RFSN-9 Piggyback Remote Float Switch for ½ HP Manual Pump

Little Giant 599117 RFSN-9 Piggyback Remote Float Switch

Specification: Maximum HP: 1 Maximum run Amps: 13 Maximum Starting Amps: 85 Maximum Temperature: 140o F This Remote Float Switch, is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps. Float switch consists of one float, a cord with piggyback plug, one large mounting strap and two small adjustable mounting clamps. Convert any manual pump to an automatic pump, up through 1/2 HP. This Little Giant float switch is a direct-acting, in-line control system for automatically controlling wastewater, effluent, and sewage pumps.

  • Brand: LITTLE GIANT
  • ASIN: B000JG80WU
  • UPC: 735090761813

Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200

Anndason 6 Pieces Plastic PP Float Switch Fish

Feature: This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device. Simple structure,easy installation liquid level controller.Light weight and simple working principle,high reliability. It can be easily converted from normally open to normally close by inverting the float. Please Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here. Package Content 6 x Float Switch

  • Color: White
  • Brand: Anndason
  • ASIN: B072QCHQ2P
  • UPC: 723610128178

Level Sense 15 Feet Water Level Float Switch with Mounting Brackets

Level Sense 15 Feet Water Level Float Switch

The switch may actuate a pump, an indicator, an alarm, or other device. It is rated for only for use with DC (not AC) applications up to 1.5 AMPs. It can be easily converted from normally open to normally close by inverting the float. This unit can also be an accessory to the Level-Sense line of water and leak detection equipment. Max. Contact Rating: 50W Max. Switching Voltage: 100VDC / 200VDC Max. Switching Current: 1.5A Max. Initial Contact Resistance: (Do not include the wire) 100m Ω Temperature Rating: -10 ~ +85 ℃ Float Ball Material: PP Float Body Material: PP+GF Screw Nut Material: PP+GF E-Ring Material: PP Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be. Are you looking for only the bracket? You can find it at: https://www.amazon.com/gp/offer-listing/B06XFCKF65/

  • Brand: LEVEL SENSE
  • ASIN: B01A4RZULM
  • UPC: 635797716522

BRODY Float Switch Water Level Control Sensor with 10' Cable

BRODY Float Switch Water Level Control Sensor with

THIS LEVEL CONTROL IS A FLOAT SWITCH WHICH SENDS AUTOMATIC ON/OFF SIGNAL. HIGH RELIABILITY AND PARTICULARLY SUITABLE FOR SEWAGE/SUMP WATER PUMPS CONTROL ON/OFF CONTROL FOR ANY KIND OF PUMPING SYSTEM. You can install it as you need: Normally closed or normally open, whichever fits your needs.

  • Brand: BRODY
  • ASIN: B00A9GDIQ8
  • UPC: 662425059058
Similar Normally Closed Float Switch Results
Normally Closed Float Switch Video Results

Understanding Float Switches: Pump vs Control

Normally Closed Float Switch

Have you ever wondered: What is a pump switch? What is a control switch? In this video we explain the difference between two types of float switches used in most pumping applications. Shop for Float Switches: https://www.rcworst.com/Float-Switches-c314.html If you need more information or as...

  • Likes: 52
  • View count: 11711
  • Dislikes: 8
  • Comments:
Tags: RC worst,rcworst,rc,worst,rcworst youtube,Water pumps equipment,water pumps,pump,pumps,Pump switc...

How to change a float switch from Normally Open to Normally Closed

Normally Closed Float Switch

This video demonstrates how to change a standard single level float switch from normally open to normally closed by removing the float, inverting it, and reinstalling it. For more information on our complete line of float switches and liquid level controls please visit us at www.liquidlevel.com ...

  • Likes: 16
  • View count: 2274
  • Dislikes: 0
  • Comments:
Tags: float switch,Innovative Components,liquidlevel,liquid level,liquid level float switch,water level...

How To Install | Float Switch Wiring And Control Diagram | Water Pump Motor Automatic ON / OFF

Normally Closed Float Switch

In this video you will learn how to use a float switch diagram, how to wire float switch and float switch installation for water tank. Hello friends In this video, I will tell you how to make the connection of the Float Switch Wiring And Control Diagrams how to make the connection of the Home Met...

  • Likes: 142
  • View count: 17176
  • Dislikes: 24
  • Comments:
Tags: instant solution,float Switch Wiring,float switch water tank,float switch wiring in english,how t...

Float Switch Installation For Water Tank | Float Switch Wiring in English

Normally Closed Float Switch

In this video you will learn how to use a float switch Connection , how to wire float switch and float switch installation for water tank. Hello friends In this video, I will tell you how to make the connection of the FLOAT SWITCH easily and can be free from the hassle of ON / OFF How do I reset...

  • Likes: 233
  • View count: 19720
  • Dislikes: 17
  • Comments:
Tags: instant solution,instantsolution,float switch installation water tank,float switch water tank,flo...

6 Water level control float switch installation

Normally Closed Float Switch

Float switch supplier www.ln-brilliant.com

  • Likes: 152
  • View count: 74410
  • Dislikes: 40
  • Comments:
Tags: water level control float swich