Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize

Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set,

Alvord Polk 127-S-19 High-Speed Steel Chucking Reamer Set, Straight Flute, Uncoated Finish, 14-Piece, 1/8 Inch - 1/2 Inch Oversize and Undersize

  • Brand: Alvord Polk
  • ASIN: B002PHNIQE
  • UPC: 662783090687

Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 3/8" Oversize

Alvord Polk 127-1 High-Speed Steel Chucking Reamer, Right

The Alvord Polk 127-1 right-hand spiral chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Right-hand spiral reamers are useful for interrupted cuts and in blind holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and the reamer flute. Right-hand spiral style tools also pull chips away from the tip of the tool, instead of driving chips in front of the tool. Right-hand spiral reamers are also useful when reaming blind holes, since pulling chips out of the hole prevents clogging, which may cause tool damage. For reamers in the 127-1 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-1 series except for those that are dowel-p...

  • Brand: Alvord Polk
  • ASIN: B002PHNBNY
  • UPC: 662783011514

Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 3/8 Inch Oversize

Alvord Polk 128-0 Cobalt Steel Chucking Reamer, Straight

The Alvord Polk 128-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of cobalt steel with no finish or coating, and is most commonly chosen for reaming in high-temperatures generated by machining tough, hard materials applications, or with abrasive materials. Cobalt steel tools are good for machining stainless steel and nickel alloys, which are harder and generate more heat through friction, giving cobalt a longer-lasting sharp edge than an equivalent high-speed steel tool. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. Cobalt steel is commonly chosen to make tools with exceptional wear resistance and temperature stability, and can be fed at higher rates than high-speed steel, while being more economical than carbide. For reamers in the 128-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1...

  • Brand: Alvord Polk
  • ASIN: B002PHN8PU
  • UPC: 662783003632

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight Flute, Round Shank, Uncoated Finish, Size: 1/2" Oversize

Alvord Polk 127-0 High-Speed Steel Chucking Reamer, Straight

The Alvord Polk 127-0 straight flute chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for general purpose reaming. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials. For reamers in the 127-0 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-0 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches. Reamers are used to finish existing holes. When holes are created using common applications like drilling or...

  • Brand: Alvord Polk
  • ASIN: B002PHN7B0
  • UPC: 892010001784

.313" HSS Chucking Reamer

.313" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEG8JA

Alvord Polk 127-2 High-Speed Steel Chucking Reamer, Left Hand Spiral Flute, Round Shank, Uncoated Finish, Size: 1/2 Inch Oversize

Alvord Polk 127-2 High-Speed Steel Chucking Reamer, Left

The Alvord Polk 127-2 left-hand spiral chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are commonly also useful when reaming through holes, since pushing chips into the hole can cause clogging, which may damage the tool. For reamers in the 127-2 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-2 series except for those that are dowel-pin siz...

  • Brand: Alvord Polk
  • ASIN: B002PHNE2M
  • UPC: 662783021780

.2505" HSS Chucking Reamer

.2505" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UECRMC

.3755" HSS Chucking Reamer

.3755" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEI89S

.3135" HSS Chucking Reamer

.3135" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEGWA0

.251" HSS Chucking Reamer

.251" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEDFO6

1.001" HSS Chucking Reamer

1.001" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEO50Y

.751" HSS Chucking Reamer

.751" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEMI1W

Cleveland C19416 Oversize Reamer Blank, 1/4", E Size (Pack of 10)

Cleveland C19416 Oversize Reamer Blank, 1/4", E Size

Cleveland oversize reamer blank. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Ideal for use as drifts of dowel pins, for gauging purposes, and for making punches. Also can be used for round tool bits, countersinks, boring, or burring tools. Use for general purpose. Applications: alloy-tool steel, nickel alloys, cast iron and cobalt alloys. Tolerance: +0.0002/-0.0000. 1/4-inches,E blank diameter. Measures 0.2500-inches width by 4.000-inches height.

  • Brand: Cleveland
  • ASIN: B00E4DNMRM
  • UPC: 697334194163

.126" HSS Chucking Reamer (2 Pcs.)

.126" HSS Chucking Reamer (2

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UE8SUC

.376" HSS Chucking Reamer

.376" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEIL0Y

Westward 11V428 Chucking Reamer, Oversize, 1.0010In

Westward 11V428 Chucking Reamer, Oversize,

  • Brand: Westward
  • ASIN: B007OXBMYO

Westward 11V427 Chucking Reamer, Oversize, 0.8760In

Westward 11V427 Chucking Reamer, Oversize,

  • Brand: Westward
  • ASIN: B007OXBGD6

.5005" HSS Chucking Reamer

.5005" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEKC88

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short) Length, Straight Flute, Round Shank, Uncoated Finish, Size: 1/4 Inch Oversize

Alvord Polk 827-0 Solid Carbide Reamer, CNC (Short)

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series. Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads. Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standa...

  • Brand: Alvord Polk
  • ASIN: B002PHNHVU
  • UPC: 662783081128

New USA Made .260 Dia Solid Carbide Reamer Decimal Chucking .2500 .010 Oversize

New USA Made .260 Dia Solid Carbide Reamer

YOU ARE PURCHASING THE PICTURED SOLID CARBIDE REAMER.SOLD BY M & J TOOLING LLCDAYTON, OHIOPRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:NEWSIZE:.260 DIAMETER REAMER DECIMAL CHUCKING .2500 .010 OVERSIZEMANUFACTURER / BRAND:M&J TOOLING LLCTHANK YOU FOR YOUR BUSINESS!LOCATION = 1-1-D-3

  • Brand: M&J TOOLING LLC
  • ASIN: B07K1GZNV4

.626" HSS Chucking Reamer

.626" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UELIYU

.438" HSS Chucking Reamer

.438" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEJGBM

New .7530 Chucking Reamer Straight Flute USA Made 3/4 Oversize .75 7433 J&B

New .7530 Chucking Reamer Straight Flute USA Made

YOU ARE PURCHASING THE PICTUREDCHUCKINGREAMER.SOLD BY M & J TOOLING LLCDAYTON, OHIOPRODUCT SPECIFICATIONS AND / OR LABELING:CONDITION:NEWIT IS LABELED:J&B 7433 HSS.7530 USA B-1MANUFACTURER / BRAND:J&BTHANK YOU FOR YOUR BUSINESS!LOCATION =U17-RIGHT

  • Brand: J&B
  • ASIN: B07PJ4NV71

.501" HSS Chucking Reamer

.501" HSS Chucking

For general purpose reaming to close tolerances. Also known as Machine Reamers.

  • Brand: Meda - Superior Import
  • ASIN: B008UEKT0E
Similar Oversize Chucking Reamers Results
Oversize Chucking Reamers Video Results

Shop Talk 14: Reamers

Oversize Chucking Reamers

I skipped over the 14th episode on my last upload so that's why this one is titled as 14. This episode is about reamers. The different types like chucking vs.taper shank, adjustable reamers, and the purposes of spiral flute reamers. I also show the proper way to turn a reamer, and don't forget, ...

  • Likes: 2481
  • View count: 70658
  • Dislikes: 27
  • Comments:
Tags: abom79,reamer,reamers,hand reamers,chucking reamer,taper shank,taper shank reamer,adjustable ream...

Introduction to Reaming

Oversize Chucking Reamers

This is an instructional video on how to ream a hole correctly. This video was filmed and edited at the University of Wisconsin- Madison: College of Engineering Student Shop. Other useful information can be found at the website: https://teamlab.engr.wisc.edu/

  • Likes: 506
  • View count: 123032
  • Dislikes: 24
  • Comments:
Tags: UW,UW-Madison,Madison,Student,educational,Shops,Machine Shop,Engineering,College,College of Engin...

How to use a reamer to make a precise hole in metal

Oversize Chucking Reamers

When a precise hole is required in a piece of material a reamer is used, because a drill does not give a very exact diameter hole. This video shows how to use a reamer in a piece of steel. Normally you would drill the hole approximately 0.2 of a millimetre smaller than the reamer that you are usi...

  • Likes: 391
  • View count: 82911
  • Dislikes: 23
  • Comments:
Tags: Reamer,reaming,hand reamer,machine reamer,using a reamer,reaming a hole,ream steel,make exact hol...

THE USE & CARE OF REAMERS Part 1 tubalcain

Oversize Chucking Reamers

An introduction to the different types of reamers and their purpose. Reamers should be stored such that the cuttings edges do not touch one another.

  • Likes: 642
  • View count: 145253
  • Dislikes: 20
  • Comments:
Tags: drill,bits,sharpening,cleveland,chicago,latrobe,south,bend,mill,lathe,bridgeport,hardinge,atlas,c...

Using a Reamer to Drill Accurate Holes - Kevin Caron

Oversize Chucking Reamers

Machinist and sculptor Chuck Girard shows sculptor Kevin Caron how to drill holes more accurately with a reamer. Learn what reamers do, how to use them correctly, and where to get them.

  • Likes: 114
  • View count: 65493
  • Dislikes: 17
  • Comments:
Tags: drill,drilling,reamer,tools,metal tools,sculptor Kevin Caron