Black Anodized Aluminum Water or Oil Fitting 3/4" NPT Female to 1/2" NPT Male Pipe Straight Gauge Sensor Reducer Bushing

Black Anodized Aluminum Water or Oil Fitting 3/4"

Black Anodized Aluminum Water or Oil Fitting 3/4" NPT Female to 1/2" NPT Male Pipe Straight Gauge Sensor Reducer BushingAdapter Style: Female NPT to Male NPT Reducers Female NPT Thread Size: 3/4" NPT Male NPT Thread Size: 1/2" NPT

  • Color: female npt to male npt reducer
  • Brand: AC PERFORMANCE
  • ASIN: B07PCJ75MH

2011-2018 SRT 6.4L Hemi JLT Oil Separator 3.0 Passenger Side Black Anodized

2011-2018 SRT 6.4L Hemi JLT Oil Separator 3.0

ALL NEW JLT 3.0 Oil Separator The new design is the 3.0 because it hold 3oz of fluid where the original held a little over 1oz. Solid and thick Billet construction Easy install with full directions NEW multi stage filter system designed to collect the finest of vapors and drop them into the easily removable bottom while allowing clean air to pass through to the intake. We put it up against the competition and have the videos to prove it. This kit is specific for the 2011-18 Dodge Charger/Challenger/300c/Cherokee/Durango 6.4L passenger side. Easy plug and play installation. How does it work? During the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors, intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases the...

  • Color: Black
  • Brand: JLT Performance
  • ASIN: B07C37JD8Q

K-Motor Performance Billet Aluminum 10 an Black Rear Block Breather Fitting Adapter for Oil Catch Can B16 B18 B20 Compatible with Honda Civic/Acura Integra

K-Motor Performance Billet Aluminum 10 an Black Rear

K-MOTOR PERFORMANCE   B series PCV breather fitting Adapter Replaces the PCV black box of the engine     Eliminates factory black pcv boxCNC machined Double O-ring for total seal Designed For Oil Catch Can line Setup   This Fitting Allows To Hook Up To Any Catch Can Currently On The Market Without A Reducer Fitting. Made Of  6061 Billet Aluminum With A Double O-Ring Design To Prevent Any Leaks Or Plug From Coming Loose.   Stainless Steel Mounting Bracket. Does Not Include Any Bolts, Motor Should Have A Bolt In Location From The Factory.     Notes: 100% Brand New Professional Installation is Highly Recommended Installation Instruction is NOT Included

  • Brand: K-MOTOR PERFORMANCE
  • ASIN: B078SHBS9D
  • UPC: 735334477081

09-17 Billet Catch Can 5.7 HEMI Technology Z Bracket

09-17 Billet Catch Can 5.7 HEMI Technology Z

UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to. Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by. All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application. The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can has become a cornerstone by improving the Performance and Economy on any vehicle you install it on.

  • Brand: UPR Products
  • ASIN: B0748ZFCYN

CVR Performance OFM61 Billet Aluminum Oil Filter Mount

CVR Performance OFM61 Billet Aluminum Oil Filter

CVR PERFORMANCE OFM61 Billet Alum Remote Oil Filter Mount GM

  • Brand: CVR Performance
  • ASIN: B005JV7NBO
  • UPC: 833077001249

K-Motor Performance CNC Billet Aluminum Oil Cap Compatible with Honda Civic and Acura Integra

K-Motor Performance CNC Billet Aluminum Oil Cap Compatible

K-MOTOR PERFORMANCE CNC Billet Aluminum Oil Cap Compatible with Honda civic / Acura Integra Compatible enginesd15, d16, d17, b16, b18, b20 CNC machined aluminumcolor: chrome   Inlcuded: 1 piece  

  • Brand: K-MOTOR PERFORMANCE
  • ASIN: B078W31PHL
  • UPC: 735334477265

Everrich Universal Double Billet Aluminum Baffled Catch Can Oil Separator Bottle For Tesla Model 3 For BMW Ford VW Volkswagen Audi A3 Peugeot

Everrich Universal Double Billet Aluminum Baffled Catch Can

Specifications: Material: aluminum Color: black Input Hose Barb OD: 15mm / 0.59in Output Hose Barb OD: 12.5mm / 0.49in Package List: 1 * Billet Aluminum Oil Catch Can 1 * Input Hose Barb 2 * Output Hose Barbs 2 * Screws 1 * Grey filter Package Including 0

  • Color: Black
  • Brand: Everrich
  • ASIN: B07TPLFF2F

PPE BILLET ALUMINUM ENGINE OIL FILLER CAP 114003000 (FITS 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 GM GMC DURAMAX 6.6L)

PPE BILLET ALUMINUM ENGINE OIL FILLER CAP 114003000

STRIPHTML($ITEMDESCRIPTION)

  • Brand: Pacific Performance Engineering
  • ASIN: B01N9M735J
  • UPC: 811070023543

Hot Bike May 2016 Magazine THE "WRENCHING" ISSUE: TECHNICAL ECSTASY

Hot Bike May 2016 Magazine THE "WRENCHING" ISSUE:

Brand new unread magazine with name label darkened out that will be well packed with cardboard and placed in protective magazine bag, with tracking number & Ships Fast!!!! CONFEDERATE MOTORS' FUTURISTIC FLYERCAM UGRADE. DIY FABBING, 2 INTO 1 PIPE, TOOL BUYER'S GUIDE, GARAGE UPGRADES, SUSPENSION INSTALL. THE WRENCHING ISSUE, TECHNICAL ECSTASY. RIDING THIS FAT BOY UNTILL THE WHEELS COME OFF. P51 FIGHTER COMBAT. SUSPENSION CARTRIDGE KIT INSTALL

  • ASIN: B01CUMM986

Pro Design Mega Flow Water Impeller Yamaha Banshee

Pro Design Mega Flow Water Impeller Yamaha

New from Pro Design is this billet aluminum water pump impeller. This impeller replaces the stock plastic unit. Not only will this impeller not break like the plastic unit, it provides up to 35% more efficient cooling. Design features a stainless steel shaft. Fits: YAMAHA BANSHEE 350 1987-2006

  • Brand: Pro Design Usa
  • ASIN: B003O6DM9S

Fleece Performance Engineering FPE-OC-CR-F-BLU Billet Oil Cap Cover (03-20016 Cummins Billet Oil Cap Cover - Blue)

Fleece Performance Engineering FPE-OC-CR-F-BLU Billet Oil Cap Cover

This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this project. Contact the seller directly for additional product information and availability.Fleece Performance 03-20016 Cummins Billet Oil Cap Cover - Blue

  • Brand: Fleece Performance Engineering
  • ASIN: B06XYPCWMN
  • UPC: 635909314530

Putars Car Dipstick Performance Locking Transmission Dipstick Universal Flexible Stainless Steel Transmission Dipstick Gearbox Dipstick 530mm

Putars Car Dipstick Performance Locking Transmission Dipstick Universal

。◕‿◕。 Description:Product name: general flexible stainless steel transmission measuring oil gauge 530mmMaterial: stainless steelColor: red, blue, silver, blackWeight: 410 gramsProduct size: 530mmPacking specification: 21.5x21.5x7cmExcellent quality oil gauge - looks great inside any engine bay!Machined billet aluminum handleStainless steel braided case (don't worry about rust)The mount TAB is shown in the figure (mounted on the firewall)The filling tube is shown below。◕‿◕。 Package includes: 1 x Measuring rod

  • Color: Red
  • Brand: Putars
  • ASIN: B07P3HJQGW
  • UPC: 682287339921

Spectre Performance 5745 Engine Oil Dipstick with Billet Handle for Big Block Chrysler

Spectre Performance 5745 Engine Oil Dipstick with Billet

Spectre’s gold irridite-plated finish Oil Dipsticks are available for a number of different vehicles and come in a variety of sizes, from 17 inch to 20 inches. This replacement oil dipstick has a base made to OEM specifications and markings match OEM for true accuracy, ensuring optimum fit and function.

  • Brand: Spectre Performance
  • ASIN: B001FM6RSQ
  • UPC: 089601574509

All-Clad BD55110 D5 Brushed 18/10 Stainless Steel 5-Ply Bonded Dishwasher Safe Fry Pan Saute Pan Cookware, 10-Inch, Silver

All-Clad BD55110 D5 Brushed 18/10 Stainless Steel 5-Ply

A true kitchen staple, this All-Clad D5 STAINLESS Brushed BD55110 10-Inch fry pan is ideal for searing, browning, and pan-frying everything from eggs to meats. The fry pan features a flat bottom and flared sides that make tossing foods effortless and allow for easy turning with a spatula. The All-Clad frying pan is great for cooking at higher heat with oils to develop foods with full rich flavor, color, and crisp texture. The only cookware of its kind, All-Clad D5 STAINLESS features a patented technology of five alternating layers of responsive aluminum and durable heat-diffusing stainless steel. d5 STAINLESS cookware heats slowly and evenly, which means perfectly browned proteins throughout, from the center all the way to the edges. The 5-ply bonded cookware’s 18/10 stainless-steel interior with a highly polished starburst finish offers natural stick resistance, and prevents food from picking up a metallic taste, while its fingerprint-free brushed stainless exterior offers exceptional beauty. Made in the USA, All-Clad d5 STAINLESS cookware provides pouring lips, large handles with bolsters, dishwasher-safe convenience, and is optimized for induction. Experience a lifetime of cooking enjoyment with All-Clad D5 STAINLESS.

  • Color: Stainless Steel
  • Brand: All-Clad
  • ASIN: B0051OEQN2
  • UPC: 781147765709

YaeCCC Bicycle Motor Kit 80cc 2 Stroke Motor Engine Mountain Bike Upgrade Kit Gas for Motorized Bicycle Bike Kits Silver

YaeCCC Bicycle Motor Kit 80cc 2 Stroke Motor

Specifications: Type:2-stroke engine, Carburetor, Ignition coil & CDI, Throttle handlebar set, Throttle cable, Clutch cable, Kill switch, Clutch lever, Chain, Chain cover, 44T Sprocket W/ 9 Hole Clamp Pads, Chain tensioner, Fuel tank, Fuel filter, Gasoline fuel line, Petcock, Muffler. Item Size:20*17*11.5cm Package Size:39*30*19cm Color:Silver Bore & Stroke: 47mm X 40mm=80 CC Rated Power: 2.5Kw/5000r/min (3 horsepower/5000r/min) Max Power: 3.5Kw/6000r/min (5-6 horsepower/6000r/min) Ignition Mode: CID Compression Ratio: 6/0.1 Driving Ratio: 18/0.1 Fuel type: No.90 Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30) Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km Type of Sparking Plug: Z4C 14MM Volume of oil Consumption: 2.5L/100km Type of Clutch: Friction Plate / Dry Cooling mode: Natural air cooling Speed Limitation: 38km/hour Package Includes: 1.Silver 80cc 2-stroke engine 2. Sprocket clamp assembly with hardware 3. Converter exhaust muffler with heat shield (silver) 4. Push button clutch 5. Heavy duty chain 6. Bearing chain tensioner / idler 7. Carburetor 8. CD ignition coil 9. Kill switch (on throttle) 10. Chain guard 11. Spark plug 12. 2L gas tank with mounting brackets 13. Muffler assembly 14. Exhaust pi...

  • Brand: YaeCCC
  • ASIN: B073NX3MXV
  • UPC: 602989768997

Alaskan Mark-IV Chainsaw Mill - (36")

Alaskan Mark-IV Chainsaw Mill -

his versatile, heavy-duty chainsaw lumber mill accurately cuts planks and beams up to 32” wide and 1/2” to 13” deep. Clamps onto your chainsaw bar with no drilling required. Lightweight and portable, enables user to mill lumber where the tree falls. No previous experience required! New CNC-Machined billet end brackets! (See photo) These new end brackets are more accurate, easier to adjust, create less vibration than the old die cast version and are virtually unbreakable. Perfect for homeowners, woodworkers, arborists and sawyers. Optimal results will be had when used in conjunction with Granberg ripping chain and first cut platforms.Basic Mill (G778) and 36-inch Handle and Rail Set (G781-36): Tubular Aircraft aluminum extrusion and zinc-plated steel parts. Instruction manual & assembly hardware. High-quality U.S. made aircraft aluminum and steel. MADE IN THE USA

  • Brand: Granberg
  • ASIN: B06XHLVY6Y
  • UPC: 012714544367

Atomik RC Alloy Front Ultra Shocks, Grey fits the Traxxas 1/10 Slash 4X4 and Other Traxxas Models - Replaces Traxxas Part 3760A

Atomik RC Alloy Front Ultra Shocks, Grey fits

Give your Traxxas 1/10 Slash 4X4 the gift of alloy greatness with this Alloy Front Ultra Shocks, Grey. Atomik RC has a full line of aluminum hop up parts for your Traxxas 1/10 Slash 4X4, available now in blue, red, and grey/gunmetal.Replaces Traxxas Part No. 3760A. Precision CNC Machined Hop Up Part for Factory Spec Fitment. Made from Hardened Billet 6061 Aluminum for Lightweight and Durable Performance.Fits the Following Traxxas Models: Traxxas 1/10 Slash 4X4, Traxxas 1/10 Slash, Traxxas 1/10 Stampede, Traxxas 1/10 Rustler, Traxxas 1/10 Stampede 4X4, Traxxas 1/10 Ford F150 SVT Raptor, Traxxas 1/10 Robby Gordon Dakar, Traxxas 1/10 Bandit, Traxxas 1/10 Nitro Slash, Traxxas 1/10 Rally, Traxxas 1/10 Monster Jam Series, Traxxas 1/10 Nitro Stampede, Traxxas 1/10 Nitro Rustler.Please NOTE - Shock oil is NOT included and is recommended prior to use.

  • Color: Gun Metal
  • Brand: Atomik RC
  • ASIN: B0033ECTBS
  • UPC: 845623011817

Fleece Performance 2003-2015 Cummins Billet Oil Cap Cover

Fleece Performance 2003-2015 Cummins Billet Oil Cap

2003-2016 Cummins Billet Oil Cap Cover

  • Brand: Fleece Performance
  • ASIN: B01FN357OC

A-Team Performance Flexible Transmission Dipstick Compatible with Chevy Chevrolet GM 4L60E Firewall Mount

A-Team Performance Flexible Transmission Dipstick Compatible with Chevy

A-Team Performance Flexible Transmission Dipstick Compatible with Chevy Chevrolet GM 4L60E Firewall Mount Fits Chevy/GM 4L60E transmissions.Features a billet aluminum handle with a flexible braided stainless hose.This transmission dipstick is firewall mounted. Comes with filler tube. Length: 29-3/8"A-Team Performance parts are sold exclusively by Southwest Performance Parts.

  • Brand: A-Team Performance
  • ASIN: B074WXKXX5

K&N KN-171B Harley Davidson/Buell High Performance Oil Filter

K&N KN-171B Harley Davidson/Buell High Performance Oil

K&N powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy installation and removal. The 17 mm nut is crossed-drilled so racers can safety wire the filter to their bike.

  • Color: Black
  • Brand: K&N
  • ASIN: B000FGI6E6
  • UPC: 759173941725

CLUTCH COVER - TORQDRIVE HON

CLUTCH COVER - TORQDRIVE

CLUTCH COVER - TORQDRIVE HON

  • Color: Black
  • Brand: REKLUSE RACING
  • ASIN: B07RG7VVYR
  • UPC: 610696017246

Scat Cranks 93023 347 Stroker Crankshaft 3.40 Stroke For 5.4 Rod & 28 Oz

Scat Cranks 93023 347 Stroker Crankshaft 3.40 Stroke

302FORD 3.4STROKE,5.400ROD LENGTHCast Pro Comp Stroker SB302 Ford Crank to make a 347 Stroker with appropriate pistons and rods3.400 Stroke, 5.400 Rod Length, 2.123 Pin. 44 LBS, Use 28 oz balancer.,Cast Pro Comp Crankshafts By Scat is a perfect way to increase cubic inches on a mild to moderate street and race engines. Pro Comp Crankshafts By Scat are made from the same SCAT's exclusive space-age 9000 materiaas Scat's standard weight cranks, but with profiled counterweights for less weight ...Perfect for engines wanting quicker rpm's Aero-wing counterweights increase horsepower by reducing windage Aero-wing counterweights Straight shot oil holes, Lightening holes in all rod throws (except 3.480 stroke) Precision ground and micropolished, Designed after our custom billets and made from SCAT's exclusive space-age 9000 material

  • Brand: Scat Cranks
  • ASIN: B00C7YQNMQ
  • UPC: 846091013075

Drake Muscle Cars CA-120001-BL Clear Anodized Billet Oil Stick Handle Cover for Chevrolet Camaro

Drake Muscle Cars CA-120001-BL Clear Anodized Billet Oil

Fits 2010-2012 Camaro. This is a GM official licensed product. This dipstick handle cover is beautifully machined from solid billet aluminum with a clear anodized finish and features the Camaro name stamped and painted on top. This billet cover installs easily over your Camaro's stock dipstick for a custom look. Machined from solid billet aluminum, the Drake Muscle Cars Camaro engine caps are a great way to add custom style under the hood. Order all of the matching caps for a great-looking set!

  • Color: Clear
  • Brand: Drake Muscle Cars
  • ASIN: B00BMDYWEE

LSX 1/8 DUAL OUT FEED OIL PORT ADAPTER PLATE LS1 LS Camaro Port 90 degree 551533

LSX 1/8 DUAL OUT FEED OIL PORT ADAPTER

LS Swap Gauge Sensor AdapterOil PressureOil Pan Relocation AdapterDoes Not Fit GTO Front Sump Oil PanDual 1/8" NPT This plate allows the factory LS sending unit to be moved to the side of the oil panFits LS engines EXCEPT GTO front sump oil pansThick 1" aluminumDoes not require gasketIncludes O-ring seal, two 1/8 NPT plugs, and 2 bolts

  • Brand: ICT Billet
  • ASIN: B00QY82H5S
  • UPC: 656729845332
Similar Performance Billet Oil Results
Performance Billet Oil Video Results

GT-R Billet Oil Filter Adapter

Performance Billet Oil

Introducing the Alpha Performance R35 GT-R Race Oil Filter Adapter. Our adapter was designed for use in high RPM and high horsepower racing and street applications. It allows for the use of a quality racing oil filter in the stock location to protect your GT-R’s engine even in the harshest condit...

  • Likes: 56
  • View count: 2262
  • Dislikes: 1
  • Comments:
Tags: AMS,Performance,Alpha,Automotosport,Oil,Wix,adapter,race,gtr,nissan,filter,oil,racing,alpha G,Six...

Melling Performance Billet Shark Tooth Oil Pump- Small Block Chevy

Performance Billet Oil

Billet Shark Tooth Oil Pumps for Small Block Chevrolet V-8 Engines! Benefits: Smoother: 70% less pressure pulsing and resultant cyclic loads. Quicker: Reduced time to prime and oil delivery to engine components. Tighter: Improved tip sealing and overall operating efficiency. Lighter: 1.75 l...

  • Likes:
  • View count: 9478
  • Dislikes:
  • Comments:
Tags:

How to install VMP Oil Pump Gears on Mustang GT w/ Mustang Lifestyle

Performance Billet Oil

VMP developed the ultimate upgrade for '11-'17 Ford Mustang GT owners with our new VMP Performance Billet Coyote oil pump gears and crank sprockets. With this upgrade, owners of high horsepower S550s will no longer have to worry about their stock oil pump gears causing damage to their Coyote en...

  • Likes: 230
  • View count: 7754
  • Dislikes: 4
  • Comments:
Tags: VMP,VMP Performance,VMP Tuning,VMP Gen3,VMP Oil pump gears,oil pump gears,mustang oil pump gears,...

LS Rebuild Must Have Oil System Parts - Billet Oil Barbell and Galley Plug by Sac City Corvette

Performance Billet Oil

**DONT SETTLE FOR KNOCKOFF'S OF SAC CITY CORVETTE'S DESIGN ** http://www.saccitycorvette.com/ Here's a quick install video on two must have pieces for your LS engine rebuild: Billet Barbell and Reusable front oil. These parts are two of four contained in the Sac City Corvette oil improvement ki...

  • Likes: 18
  • View count: 584
  • Dislikes: 0
  • Comments:
Tags: #ls1,#ls2,#ls3,#lq4,#ls

Whipple S550 Gets Billet Oil Pump Gear + Crank Gear

Performance Billet Oil

VMP Coyote OPG: https://www.vmpperformance.com/VMP-Coyote-5.0L-oil-pump-gears The Whipple S550 has been needing this upgrade for a while! We brought the S550 over to VMP Performance to install their new Billet Oil Pump Gear and Crank Gear upgrade. Use code "MLOPG" on their website for a discount...

  • Likes: 586
  • View count: 14654
  • Dislikes: 12
  • Comments:
Tags: mustang lifestyle,mustang_lifestyle,mustang vlogs,terminator,fast terminator,vmp,mustang week 201...