Gyros 92-92215 Metric Carbon Steel Hex Rethreading Die, 22mm x 1.50 Pitch

Gyros 92-92215 Metric Carbon Steel Hex Rethreading Die,

The Gyros carbon steel hexagon die, is used for rethreading bruised, rusty or worn threads. Available in many sizes.

  • Brand: Gyros
  • ASIN: B008AKQFY2
  • UPC: 780670912697

Lang Tools 2573 3-Piece Thread Restorer File Set

Lang Tools 2573 3-Piece Thread Restorer File

Lang Tools (2573) 3-Pc. Thread Restorer File Set restores damaged external threads, any diameter, left or right hand. Just select the proper number of threads per inch or millimeters per thread, and overlapping several good threads, work over the area using regular file strokes. These rethreading files are highly tempered for strength and durability and are packaged in a reusable pouch. Pitches include: SAE Rethread Files (Threads per inch): 9, 10, 11, 12, 13, 14, 16, 18, 20, 24, 27, 28, and 30, Metric Rethread file (Millimeters per thread): 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, and 3.00.

  • Brand: Lang Tools
  • ASIN: B007TMEXTQ
  • UPC: 077769257303

CTA Tools 8240 Universal 53-Piece Rethreading Set

CTA Tools 8240 Universal 53-Piece Rethreading

CTA Tools 8240 Universal 53-Piece Rethreading Set includes thread files 8231 and 8233. This set also includes the following color-coded Taps and Dies: Metric – 6 by 1.00, 8 by 1.25, 8 by 1.50, 10 by 1.00, 10 by 1.25, 10 by 1.50, 11 by 1.50, 12 by 1.25, 12 by 1.50, 12 by 1.75, 14 by 1.50-Millimeters. NC-USS – 1/4-Inch - 20, 5/16-Inch – 18, 3/8-Inch – 16, 7/16-Inch – 14, 1/2-Inch – 13, 9/16-Inch – 12. NF-SAE – 1/4-Inch – 28, 5/16-Inch – 24, 3/8-Inch – 24, 7/16-Inch – 20, 1/2-Inch – 20, 9/16-Inch – 18. Die sizes include: Metric – 6 by 1.25, 7 by 1.00, 8 by 1.00-Millimeter; NC-USS – 5/8-Inch – 11 and NF-SAE – 5/8-Inch – 18. Whether tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

  • Brand: CTA Tools
  • ASIN: B0035533S8
  • UPC: 053001082407

Gyros 92-91212 Metric Carbon Steel Hex Rethreading Die, 12mm x 1.25 Pitch by Gyros

Gyros 92-91212 Metric Carbon Steel Hex Rethreading Die,

Carbon Steel Hex Rethreading Die;Die Size: 12mm x 1.25 Metric;Use with any type of wrench

  • Brand: Gyros
  • ASIN: B01LWJFV3I
  • UPC: 767654244449

CTA Tools 8230 Thread Restoring File Set - 4 Piece

CTA Tools 8230 Thread Restoring File Set -

CTA Tools 8230 Thread Restoring File Set - 4 Piece is designed to restore damaged threads on bolts and shafts. Files are crosscut and depth proportional to the thread pitch, so they will not skip or jump out of fine pitches. All 4 files are 7/16-Inch square by 8-3/8-Inch long. The file types and pitch sizes are as follows: (number:8231) Metric 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00-millimeters; (number:8233) SAE 11, 12, 13, 14, 16, 18, 20, 24 TPI (threads per-Inch); (number:8235) SAE 9, 10, 12, 16, 20, 27, 28, 32 TPI. The set also includes a single blade file (number:8237) that can renew all 60-Degree threads, including metric. Heavy-duty construction allows for strength and durability. Whether tuning up your ‘68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job. California Prop 65 - Warning, This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

  • Brand: CTA Tools
  • ASIN: B009VI9WFQ
  • UPC: 053001082308

7pcs Knurling Knurler Tool Diagonal Wheel Linear Knurl Set 0.5-2mm Pitch

7pcs Knurling Knurler Tool Diagonal Wheel Linear Knurl

"Yimoshine - 1205335 - 7pcs Knurling Knurler Tool Diagonal Wheel Linear Knurl Set 0.5-2mm Pitch Ratchet handles are ergonomically designed and have an easy-to-use, thumb-operated reverse-switch mechanism, quick released operation ryobi chainsaw us dremmel steel fleshing liner tether big one ferrule wax seat hss vest rack snap-on crescent one apollo dermaplaning crl caliper sha meat rcbs noga rockwell e-tool pdr zoomlock hex y4 key skateboard dohvinci 4 chef fine s"

  • Brand: Yimoshine
  • ASIN: B07TVT9N34

Ultimate Arms Gear 14X1 RH Right Hand Muzzle Threading Gunsmithing Adjustable High-Speed Steel Round Die

Ultimate Arms Gear 14X1 RH Right Hand Muzzle

Official Product of Ultimate Arms Gear, Brand New.

  • Brand: Ultimate Arms Gear
  • ASIN: B014Q6DSOI

8mm x 1.25 Metric Hex Rethreading Die - Carbon Steel (PACK OF 2)

8mm x 1.25 Metric Hex Rethreading Die -

Carbon Steel Hex Rethreading Dies. For cleaning and repairing existing metric threads. Not designed to cut new threads.

  • Brand: Dies - Hex - Metric
  • ASIN: B01HIXDKOO

Hotab Thread Restoration File BSW/BSF SAE/UN BSP/PE Cleans Damaged Threads Repair Tools

Hotab Thread Restoration File BSW/BSF SAE/UN BSP/PE Cleans

Specification:Type:Thread Restorer FileMaterial:Bearing SteelLength:216mmSelect Type: Metric, BSW/BSF, SAE/UN, BSP/PE.Pitch specification:0.75/1.0/1.25/1.5/1.75/2.0/2.5/3.0Notice:Due to the different monitor and light effect,the actual color maybe a slight different from the picture color.Please allow 1-2mm differs due to manual measurement.Included:1 x External Thread Repair Tool

  • Color: Thread Restoration File
  • Brand: Hotab
  • ASIN: B07BMRWSC6

RETHREADING TOOL M3.5 X 0.6 Length 150mm Thread Pitch 3.5mm Thread Type Metric

RETHREADING TOOL M3.5 X 0.6 Length 150mm Thread

Product OverviewRETHREADING TOOL M3.5 X 0.6RETHREADING TOOL, M3.5 X 0.6 , Length: 150mm , Thread Pitch: 3.5mm , Thread Type: MetricProduct InformationItem Type: ToolsItem Sub Type: Thread RestoringManufacturer Code: PN37923Manufacturer Name: DRAPER TOOLSPack Size: 1RoHS Status: NAStandard Weight: 45gCountry Of Origin: Taiwan

  • Brand: HQ LTD
  • ASIN: B07SHDBGFW

IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set, 117 Piece 26377

IRWIN Tools Hanson Machine Screw/Fractional/Metric Tap and Hex

The IRWIN HANSON Machine Screw/Fractional/Metric Tap and Hex Die and Drill Bit Deluxe Set contains almost every tap, hex die, and drill bit a craftsman may need for maintenance and auto repair work. This massive set features tools perfectly crafted for hand-threading a variety of materials. Crafted of high carbon steel they provide the accuracy professional craftsmen rely on to get the job done right the first time.

  • Color: Silver/Blue
  • Brand: Irwin Tools
  • ASIN: B0000DD4KW
  • UPC: 661561076677

Gyros 92-91010 Metric Carbon Steel Hex Rethreading Die, 10mm x 1.00 Pitch by Gyros

Gyros 92-91010 Metric Carbon Steel Hex Rethreading Die,

Carbon Steel Hex Rethreading Die;Die Size: 10mm x 1.00 Metric;Use with any type of wrench

  • Brand: Gyros
  • ASIN: B01MRNYGI2
  • UPC: 733353837084

Nicholson 4 Piece Thread Repair File Set, Single Cut, Square Shape, Fine, 8-3/8" Length

Nicholson 4 Piece Thread Repair File Set, Single

Cooper Hand Tools, a division of Cooper Industries, Inc., manufactures and markets many well-known brands of hand tools, chain, and electronic soldering products, including Campbell (R) chain, Crescent (R) brand wrenches and pliers, Lufkin (R) measuring tools, Nicholson (R) files and saws, Plumb (R) hammers, H.K. Porter (R) bolt cutters, Weller (R) soldering products, and Wiss (R) snips. Headquartered in Raleigh, North Carolina, Cooper Hand Tools has manufacturing facilities in 16 international locations, and has approximately 4,400 employees worldwide.

  • Brand: Apex Tool Group
  • ASIN: B001T4KRHC
  • UPC: 037103330246

1 piece 1.6mm Pitch 8mm(ID)28mm(OD)8mm(H) Wheel Knurling Linear Knurl Tool

1 piece 1.6mm Pitch 8mm(ID)28mm(OD)8mm(H) Wheel Knurling Linear

Material: Alloy Model Number: 1.6mm Pitch

  • Brand: Congo Plaxika
  • ASIN: B07PPMCHQW

Lang Tools 2584 15-Piece Metric Thread Restorer Set

Lang Tools 2584 15-Piece Metric Thread Restorer

Made in the USA, Lang Tools (2584) 15-Pc. Metric Thread Restorer Set contains (7) Metric Rethread Dies, (7) Metric Rethread Taps, and (1) Metric Restorer File, allowing you to repair damaged external threads or internal threads on nuts, bolts and studs. The set is packaged in a high impact styrene tray with clear cover for display and storage. Dies included: M6-1.00, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.50, and M12-1.75; Taps included: M6-1.00, M8-1.25, M10-1.25, M10-1.50, M12-1.25, M12-1.50, and M12-1.75; File pitches include: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, and 3.00.

  • Brand: Lang Tools
  • ASIN: B000XJ48V0
  • UPC: 077769025841

UTR - Universal Thread Repair Tool. Immediately Save, Repair & Bring Damaged Threads Back to life. All in one, 5/32" to 1/2" Restorer.

UTR - Universal Thread Repair Tool. Immediately Save,

UTR - Universal Thread Repair Tool. Immediately Save, Repair & Bring Damaged Threads Back to life. All in one, 5/32" to 1/2" Restorer.

  • Brand: UTR
  • ASIN: B075W99B5H
  • UPC: 729253440424

Gyros 92-90710 Metric Carbon Steel Hex Rethreading Die, 7mm x 1.00 Pitch by Gyros

Gyros 92-90710 Metric Carbon Steel Hex Rethreading Die,

Carbon Steel Hex Rethreading Die;Die Size: 7mm x 1.00 Metric;Use with any type of wrench

  • Brand: Gyros
  • ASIN: B01M13HHQ5
  • UPC: 767654792599

IRWIN Tools Metric Tap and Hex Die Set, 41-Piece (26317)

IRWIN Tools Metric Tap and Hex Die Set,

41 Piece, Metric Tap & Hex Die Set, Dies Are Ideal For Routine Maintenance, Repair Work & For Rethreading Where High Accuracy & Tolerance Thread Is Not Critical, Taps Have Straight Flutes Which Are Ground To Provide Rapid Chip Removal For Efficient Threading, Designed For Hand Threading Work In A Variety Of Materials Taps Produce A Class 2B Thread, Includes Metric 3 mm x 0.50, 4 mm x 0.70, 4 mm x 0.75, 5 mm x 0.80, 5 mm x 0.90, 6 mm x 1.00, 7 mm x 1.00, 8 mm x 1.00, 8 mm x 1.25, 9 mm x 1.00, 9 mm x 1.25, 10 mm x 1.25 mm, 10 mm x 1.50, 11 mm x 1.50, 12 mm x 1.50, 12 mm x 1.7M Tap & Die, Pipe 1/8inch x 28BSPp Tap & Die, Plain Die Stock 5/8inch Hex Dies, Adjustable Die Stock For 1inch Dies, Adjustable Handle Tap Wrench For #0 - 1/2inch, T-Handle Wrench For Taps #0 - 1/4inch, 2 In 1 Tap Wrench For Taps 1/4inch - 1/2inch, 18 Leaf Metric Thread Pitch Gauge.

  • Brand: Irwin Tools
  • ASIN: B0000DD4KV
  • UPC: 042526263170

SHAVIV 29147 Blade F26X for External Outer Diameter Chamfering

SHAVIV 29147 Blade F26X for External Outer Diameter

SHAVIV by Vargus is the original hand deburring tool in the market since the 1960's and is today distributed all over the world. SHAVIV is the answer to unwanted burrs on a wide variety of materials such as metal, plastics, wood and more. Wherever the burr, SHAVIV has the tool in its extensive range to solve your problem. Look to SHAVIV for the tools to do the finishing problems that a machine just can't handle. With SHAVIV there is no downtime, so you increase your productivity. Shaviv Part 29147 is our F26X External (Outer Diameter) Chamfering blade for workpieces up to 1.02" (26mm) diameter

  • Brand: SHAVIV
  • ASIN: B003B3EQ3K

8mm x 1.0 Metric Hex Rethreading Die - Carbon Steel (PACK OF 2)

8mm x 1.0 Metric Hex Rethreading Die -

Carbon Steel Hex Rethreading Dies. For cleaning and repairing existing metric threads. Not designed to cut new threads.

  • Brand: Dies - Hex - Metric
  • ASIN: B01HIXDLWU

110 Piece Tap and Die Metric Set - SAE and Metric Alloy Steel Titanium Tap & Die Tool Combination Kit for Cutting External and Internal Threads (Blue)

110 Piece Tap and Die Metric Set -

💓💓💓Welcome to Visit Ljnuanrg Direct, we will try our best to make you satified .If you have any questions,please feel free to contact us at any time ,we will respond to you within 24 hours and provide a satisfactory solution to you.Thank you! Feature: Tap sizes: 4x0.7, 5x0.8, 7x1/0.75, 8x1.25/1/0.75, 9x0.75/1/1.25, 10x0.75/ 1/1.25/1.5, 11x0.75/1/1.25/1.5, 12x 0.75/1/1.25/1.5/1.75, 14 x1,16x1/1.5/2, 18x1.5, 14 x 2/1.5/1.25 Die Sizes: M2x0.4. M3x0.5, M4x0.7, M6x0.75,M6x1, M7x0.75, M7x1, M8x0.75,M8x1, M8x1.25, M9x0.75, M9x1, M9x1.25, M10x0.75,M10x1, M10x1.5, M10x1.75, M11x0.75, M11x1, M11X1.25, M11x1.5, M12X0.75, M12x1, M12x1.25, M12x1.5, M12x1.75, M14x1, M14x1.25, M14x1.5, M14x2, M16x1, M16x1.5, M16x2, M18x1.52 Adjustable Tap Holders M6-M20 (1/4"-3/4"), M3- M12 (1/16" - 1/2"), 1 x single T-bar tap holder, 2 x Die Holder 25mm (1") dia, 38mm (1 1/2" dia), Supplied in a blow mould case with identification for easy storage. Package Includes: 1X110 Pc Engineers Kit

  • Color: Blue
  • Brand: LONGZUTS
  • ASIN: B07SDB3982
  • UPC: 098435537819

RE-THREADING TOOL M4.0 X 0.7 Length 20mm SVHC No SVHC (15-Jan-2019) Thread Pitch 0.7mm

RE-THREADING TOOL M4.0 X 0.7 Length 20mm SVHC

Product OverviewRE-THREADING TOOL M4.0 X 0.7RE-THREADING TOOL M4.0 X 0.7 , Length: 20mm , Product Range: - , SVHC: No SVHC (15-Jan-2019) , Thread Pitch: 0.7mm , Thread Type: -Product InformationItem Type: ToolsItem Sub Type: Thread RestoringManufacturer Code: PN495029Manufacturer Name: CK TOOLSPack Size: 1RoHS Status: NAStandard Weight: 45gCountry Of Origin: Taiwan

  • Brand: HQ LTD
  • ASIN: B07SHDRZGL

Gyros 92-94420 Metric Carbon Steel Hex Rethreading Die, 14mm x2.00 Pitch by Gyros

Gyros 92-94420 Metric Carbon Steel Hex Rethreading Die,

Carbon Steel Hex Rethreading Die;Die Size: 14mm x 2 Metric;Use with any type of wrench

  • Brand: Gyros
  • ASIN: B01M0R86T5
  • UPC: 733353108016

9TRADING 8pc Axle Spindle Fractional & Metric Rethreading Set Kit

9TRADING 8pc Axle Spindle Fractional & Metric Rethreading

8pc Axle Spindle Fractional & Metric Rethreading Set Kit Brand NEw Free SHIPPING FOR ALL USA Specification: Spindle Die Sizes: M24 X 1.50, M24 X 2.00, M22 X 1.00, M22 X 1.50, M20 X 1.50, M20 X 1.25, 13/16" X 20Unf, 3/4" X 20Unf This Tool Set Accesses Axle Threads On Spindles Of Eight Popular Die Sizes For Both Cleaning And Rethreading Jobs. Operates With 1-1/4" Socket Or Wrench Applications: Most Domestic Or Imported Front Wheel Drive Vehicles Note: Returns: 30 day returns. Buyer pays for return shipping

  • Brand: 9TRADING
  • ASIN: B07M7PN4JT
  • UPC: 783741904799
Similar Pitch Rethreading Tool Results
Pitch Rethreading Tool Video Results

Metric or Imperial Bolt? Thread Pitch and Snap On Rethread Kit

Pitch Rethreading Tool

How to tell the difference betweeen a metric and imperial bolt. Thread pitch explained. Snap on rethread kit review.

  • Likes: 11
  • View count: 836
  • Dislikes: 0
  • Comments:
Tags: Metric,Imperial,UNC,UNF,Snap on rethread,Thread Pitch

Identifying Thread Pitch & Size

Pitch Rethreading Tool

Learn to identify thread pitch and size using calipers, a pitch gauge, and thread identification guide. Tapered and parallel threads are explained. More information on tube and pipe fittings: http://www.swagelok.com/products/fittings.aspx?cid=yt_threadID_fitting Contact a Sales and Service ...

  • Likes: 3070
  • View count: 718684
  • Dislikes: 180
  • Comments:
Tags: fractional threads,parallel threads,pitch gauge,straight threads,metric threads,fittings,swagelok...

How to Rethread a Hole Using a Tap and Die Set

Pitch Rethreading Tool

If you've worked on cars long enough it's inevitable before you come across a broken screw or a rusted one. If you need to re-thread new bolt holes, or create new threaded holes, this video will help you perform that task successfully. »»» Subscribe: http://youtube.com/carsntoys »»» Facebook...

  • Likes: 783
  • View count: 179897
  • Dislikes: 83
  • Comments:
Tags: rethreading,rethread a bolt,rethreading a bolt,threading spark plug hole,rethreading kit,rethread...

How To Thread a Stripped Bolt ( using a die to create new threads )

Pitch Rethreading Tool

My tile saw has a stripped bolt, HAD to fix it because buying a NEW saw would be $1400 !! Sooooo, here is my effort doing something I never tried...being a machinist ;-)

  • Likes: 356
  • View count: 98053
  • Dislikes: 86
  • Comments:
Tags: metal die,steel die,tap and die,tap & die,threading die,how to use tap and die,threading steel,ho...

Calculate pitch (screw thread)

Pitch Rethreading Tool

Steps for any inch-based screw thread standards.

  • Likes: 210
  • View count: 70432
  • Dislikes: 31
  • Comments:
Tags: Screw Thread,TPI,threads per inch,turns per inch,US Customary Units (Measurement System),Imperial...