Poison Spyder 18-08-410 Body Armor

Poison Spyder 18-08-410 Body

Poison Spyder JK Body Armor is recommended equipment for any JK venturing into off road situations where body damage is eminent. JK Body Armor protects the thin factory sheetmetal with rugged, precision-fit 3/16" plate steel or aluminum. Used by itself, JK Body Armor hugs the Jeep's body contours to provide protection with no loss of ground clearance. Used with the factory Rubicon rocker rails, the JK Body Armor helps prevent trail damage that can be caused by rocks pushing the factory rocker rails up into the body. And used with Poison Spyder's JK Rocker Knockers, the JK Body Armor provides one more line of defense for your JK, in the most complete, strongest, best looking package of rocker panel protection gear available for the JK.

  • Brand: Poison Spyder
  • ASIN: B00KDQN46I
  • UPC: 614901727616

Poison Spyder 57-63-200 Grab Handle

Poison Spyder 57-63-200 Grab

Poison Spyder 57-63-200Grab Handles 1.5in-2in Bare Tube (pair) All Models

  • Brand: Poison Spyder
  • ASIN: B01BQHOILM
  • UPC: 614901732139

Poison Spyder 18-70-010 Pillar Post

Poison Spyder 18-70-010 Pillar

Continue the protection of your Poison Spyder JK Body Armor, all the way up the B-Pillar of the 4-door JK! This B-Pillar Cover is CNC laser-cut from 3/16" aluminum, shaped to fit snugly with our JK 4-Door Body Armor or Brawler Rockers. The B-Pillar Cover attaches with the provided countersunk stainless steel flat head bolts and nut-serts. The result is an extra layer of protection for the B-Pillar of your JK, which may be vulnerable from tree branches, brush and canyon walls. Note that these are designed to provide a measure of protection however they will not make your Jeep's B-pillars bomb-proof. Ships as bare aluminum.

  • Brand: Poison Spyder
  • ASIN: B00KDO3DDE
  • UPC: 614901727760

Poison Spyder 42-11-044-PC Dana 44 Diff Cover - Pc

Poison Spyder 42-11-044-PC Dana 44 Diff Cover -

Poison Spyder Customs, Inc. 42-11-044-PC

  • Brand: Poison Spyder
  • ASIN: B01LOGK5US
  • UPC: 614901733242

Poison Spyder 14-16-020-D Bumper

Poison Spyder 14-16-020-D

POISON SPYDER 14-16-020-D JEEP TJ/LJ BFH Bumper w/ Shackle Tabs, Finish Bare SteelPOISON SPYDER 14-16-020-D JEEP TJ/LJ BFH Bumper w/ Shackle Tabs, Finish Bare Steel

  • Brand: Poison Spyder
  • ASIN: B01BP6BOFW
  • UPC: 614901725773

Poison Spyder 41-04-080 LED Light

Poison Spyder 41-04-080 LED

3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

  • Brand: Poison Spyder
  • ASIN: B01LOGJNWY
  • UPC: 614901750508

Poison Spyder 14-53-010-PC Hood Louver

Poison Spyder 14-53-010-PC Hood

Many of the problems Jeeps and slow-moving rockcrawlers encounter on the trail are due to overheating. At slow speeds there simply isn't enough airflow through the engine compartment to keep things cool. Worse, engine compartments on most vehicles are poorly vented, with no way for hot air (which rises) to escape from the upper areas of the engine bay. Poison Spyder's Hood Louvers solve that problem by promoting proper airflow through and out of the engine compartment, while adding great looks to your Jeep. IMPORTANT: This part number is for a hood louver designed to fit TJ hoods with a single windshield washer squirter. These are typically '03-'06 model years, but we've seen some discrpencies in the model year application so please visually check your hood prior to ordering. TJ's with two windshield washer squirters are typically '97-'02.

  • Brand: Poison Spyder
  • ASIN: B01BP6BZ42
  • UPC: 614901726091

Poison Spyder 18-04-012-02 JK License Plate Mount Wide Vent

Poison Spyder 18-04-012-02 JK License Plate Mount Wide

The Poison Spyder JK License Plate Mount allows you to relocate your Jeep's license plate to the center of the tailgate, for those who run without a tailgate-mounted spare tire. The License Plate Mount uses four of the OE spare tire mount bolts, and is offset to allow proper function of the tailgate vents. The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.

  • Brand: Poison Spyder
  • ASIN: B01LZEPQNL
  • UPC: 614901727463

Poison Spyder 18-04-011 Tramp Stamp

Poison Spyder 18-04-011 Tramp

POISON SPYDER 18-04-011 Posion Spyder JK Tramp StampPOISON SPYDER 18-04-011 Posion Spyder JK Tramp Stamp

  • Brand: Poison Spyder
  • ASIN: B01BQHNGCE
  • UPC: 614901727432

Poison Spyder 42-11-044 Dana 44 Bombshell Diff Cover

Poison Spyder 42-11-044 Dana 44 Bombshell Diff

Bombshell Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

  • Color: Steel
  • Brand: Poison Spyder
  • ASIN: B01M1OS74B
  • UPC: 614901733235

Poison Spyder 14-53-011-PC Hood Louver

Poison Spyder 14-53-011-PC Hood

Many of the problems Jeeps and slow-moving rockcrawlers encounter on the trail are due to overheating. At slow speeds there simply isn't enough airflow through the engine compartment to keep things cool. Worse, engine compartments on most vehicles are poorly vented, with no way for hot air (which rises) to escape from the upper areas of the engine bay. Poison Spyder's Hood Louvers solve that problem by promoting proper airflow through and out of the engine compartment, while adding great looks to your Jeep. IMPORTANT: This part number is for a hood louver designed to fit TJ hoods with two windshield washer squirters. These are typically '97-'02 model years, but we've seen some discrpencies in the model year application so please visually check your hood prior to ordering. TJ's with a single windshield washer squirter are typically '03-'06.

  • Brand: Poison Spyder
  • ASIN: B00KDO36R2
  • UPC: 614901726114

Poison Spyder 41-08-010 LED Tail and Reverse Lights w/ Wiring Harnesses Kit for 07-14 Wrangler JK

Poison Spyder 41-08-010 LED Tail and Reverse Lights

This complete kit includes everything you need to install 4" round high intensity LED taillights and 2-1/2" round LED reverse lights into the Poison Spyder Crusher Corners on your Jeep JK Wrangler. Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.

  • Brand: Poison Spyder
  • ASIN: B01LYRDKQ1
  • UPC: 614901751062

Poison Spyder 17-53-011-PC Hood Louver

Poison Spyder 17-53-011-PC Hood

Many of the problems Jeeps and slow-moving rockcrawlers encounter on the trail are due to overheating. At slow speeds there simply isn't enough airflow through the engine compartment to keep things cool. Worse, engine compartments on most vehicles are poorly vented, with no way for hot air (which rises) to escape from the upper areas of the engine bay. Poison Spyder's Hood Louvers solve that problem by promoting proper airflow through and out of the engine compartment, while adding great looks to your Jeep. NOTE: This item fits JK's with two windshield washer nozzles, which should be 2013 and later models (please physically check yours before ordering, as there may be some discrepency between this feature change and the model year change).

  • Brand: Poison Spyder
  • ASIN: B00KDO3B7M
  • UPC: 614901727128

Poison Spyder 45-45-010 Aluminum Hawse Winch Fairlead

Poison Spyder 45-45-010 Aluminum Hawse Winch

The Poison Spyder Aluminum Hawse Fairlead will help protect your synthetic winchline during winch operation, as well as give the front of your 4X4 a little bit of Poison Spyder attitude. CNC machined from billet aluminum and powdercoated for a durable finish.

  • Brand: Poison Spyder
  • ASIN: B00KDO3P5A
  • UPC: 614901728842

Poison Spyder 41-06-010-P Tail Light Harness

Poison Spyder 41-06-010-P Tail Light

Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.

  • Brand: Poison Spyder
  • ASIN: B01BQHNOD0
  • UPC: 614901728088

Poison Spyder 3/4 Inch Recovery Shackle (Zinc coated) - 56-16-010

Poison Spyder 3/4 Inch Recovery Shackle (Zinc coated)

These heavy duty 3/4" Recovery Shackles are rated at a working load limit of 4-3/4 tons. Made of high quality steel and yellow zinc plated for corrosion resistance. The heavy duty D-ring and massive 7/8" threaded pin make a quick job of safely rigging recovery straps and winch cables. No 4X4 should be on the trail without a couple of these in the onboard recovery kit. Sold by the piece.

  • Brand: Poison Spyder
  • ASIN: B00ZBBJ8X8
  • UPC: 614901732023

Poison Spyder 14-16-020-DB Bumper

Poison Spyder 14-16-020-DB

POISON SPYDER 14-16-020-DB JEEP TJ/LJ BFH Bumper, w/ Shackle Tabs & Brawler Bar, Finish Bare SteelPOISON SPYDER 14-16-020-DB JEEP TJ/LJ BFH Bumper, w/ Shackle Tabs & Brawler Bar, Finish Bare Steel

  • Brand: Poison Spyder
  • ASIN: B01BP6BQEQ
  • UPC: 614901725780

Poison Spyder 41-04-106 LED Light

Poison Spyder 41-04-106 LED

Electronic flasher to provide proper current intermittency for LED taillights and turn signals in your Jeep 2001-2006 Jeep TJ or LJ. Easy to install (instructions included).

  • Brand: Poison Spyder
  • ASIN: B01LZQHQHG
  • UPC: 614901728019

Poison Spyder 42-11-030-PC Differential Cover/Component

Poison Spyder 42-11-030-PC Differential

This item is designed to fit specific vehicles. Please ensure correct part fitment before purchasing this product. The product is of good quality.

  • Brand: Poison Spyder
  • ASIN: B01LOGK2J2
  • UPC: 614901733228

Poison Spyder 18-04-012 JK Tramp Stamp II (Wide Vent) with License Plate Mount

Poison Spyder 18-04-012 JK Tramp Stamp II (Wide

The Poison Spyder JK Tramp Stamp II with License Plate Mount allows you to relocate your Jeep's license plate to the center of the tailgate, for those who run without a tailgate-mounted spare tire. The Tramp StampII is CNC laser cut from 1/8" aluminum plate and features the Poison Spyder logo. The JK License Plate Mount is CNC laser cut and precision brake-formed from 14 ga. aluminum. The License Plate Mount is offset to allow proper function of the tailgate vents. Both pieces are powder coated with a textured black finish. The Tramp Stamp II and License Plate Mount are installed using the OE spare tire mount bolts.

  • Color: black
  • Brand: Poison Spyder
  • ASIN: B01FN4X202
  • UPC: 614901727449

Poison Spyder 41-04-300 LED Light

Poison Spyder 41-04-300 LED

2-1/2" flush mount LED back-up light for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer's corner protectors, or anywhere you can cut a 2-3/4" hole in a flat sheetmetal panel. push-in mounting with the included rubber grommet. Sold by each, if you need a pair specify a quantity of 2.

  • Brand: Poison Spyder
  • ASIN: B01LXGJMFV
  • UPC: 614901728033

Poison Spyder 14-53-011 Hood Louver

Poison Spyder 14-53-011 Hood

Many of the problems Jeeps and slow-moving rockcrawlers encounter on the trail are due to overheating. At slow speeds there simply isn't enough airflow through the engine compartment to keep things cool. Worse, engine compartments on most vehicles are poorly vented, with no way for hot air (which rises) to escape from the upper areas of the engine bay. Poison Spyder's Hood Louvers solve that problem by promoting proper airflow through and out of the engine compartment, while adding great looks to your Jeep. IMPORTANT: This part number is for a hood louver designed to fit TJ hoods with two windshield washer squirters. These are typically '97-'02 model years, but we've seen some discrpencies in the model year application so please visually check your hood prior to ordering. TJ's with a single windshield washer squirter are typically '03-'06.

  • Brand: Poison Spyder
  • ASIN: B00KDO313G
  • UPC: 614901726107

Poison Spyder JK 4-Door Trail Cage Kit (Bolt-Together) 11-Up - Grab Handles

Poison Spyder JK 4-Door Trail Cage Kit (Bolt-Together)

Roll CageTrail Cage KitTrail Cage Kit; Made Of Bare Metal; 1.75 in. 0.120 Wall DOM Structural Tubing; w/Grab Handles;SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.FEATURES:Comes Disassembled And Requires Welding To InstallProvides Strength From The Top Of The Windshield To The FloorProvides Strong Foundation For The Forward Section Of The CageThe Poison Spyder Bolt-Together Trail Cage Kit is the strongest add-on cage you can bolt in to your JK. Designed to strengthen your Jeeps existing roll bar, the Poison Spyder Trail Cage Kit fortifies the driver and passenger area by adding a robust cage fabricated from CNC laser notched, NC-bent DOM steel tubing and CNC laser cut, precision brake-formed 3/16" plate steel components. When shopping for a cage kit for your Jeep, make sure that any product you are considering uses stronger DOM, "Drawn Over Mandrel" structural tubing rather than the cheaper welded seam tubing that some manufacturers use. The A-Pillar section of the Poison Spyder JK Trail Cage Kit extends all the way to the floor of the JK with a single piece of CNC laser cut,...

  • Brand: Poison Spyder
  • ASIN: B00KDO3GAY
  • UPC: 614901727708

Poison Spyder Body Mounted Tire Carrier 17-13-010

Poison Spyder Body Mounted Tire Carrier

Poison Spyder's JK Body Mounted Tire Carrier works with the stock rear bumper or just about any aftermarket rear bumper, and can accommodate up to a 40" spare tire and accessories. The main tire carrier assembly is made of 1-1/2" DOM tubing for strength and great looks. All of the plate steel components are CNC laser cut and brake-formed from 1/8" or 3/16" steel plate. The hinge and latch assemblies are designed to address common issues inherent in similar tire carriers from other manufacturers. The tire carrier comes with mounting points to add several Rot-Pax fluid packs as well as a Hi-Lift jack.

  • Brand: Poison Spyder
  • ASIN: B01AW382JK
  • UPC: 614901726855
Similar Poison Spyder 4 X 4 Results
Poison Spyder 4 X 4 Video Results

2014 Poison Spyder Jeep Wrangler Unlimited Rubicon 4x4 - Northwest Motorsport

Poison Spyder 4 X 4

Check out our Built Black 2014 Jeep Wrangler Rubicon Unlimited decked out in Poison Spyder gear! ----------------------------- Check out our 3 locations in Puyallup! 400 River Road, 1502 River Road, and 300 Valley Avenue TRUCKS, TRUCKS.... AND MORE TRUCKS!!!!!!! Check us out online at http://w...

  • Likes: 29
  • View count: 4934
  • Dislikes: 2
  • Comments:
Tags: nwmsrocks,lifted trucks,diesel trucks,puyallup,jay buhner,northwest motorsport,4x4,the bone,Four-...

Rock Hard 4x4 Front & Rear Jeep Harness Bar Install

Poison Spyder 4 X 4

The San Diego Jeep Club Jeep Wrangler build continues and in this episode the team install Rock Hards front and rear harness bars. These bars are going to allow the Jeep Wrangler to use a 5 point harness seatbelt with the PRP suspension seats that were previously installed. Additionally, these ...

  • Likes: 555
  • View count: 55733
  • Dislikes: 23
  • Comments:
Tags: rock hard harness bar,#8482,front seat harness bar,rear seat harness bar,rock hard,jeep wrangler,...

Poison Spyder Wraith - Vanquish Hubs - Week 4 - Budget Build

Poison Spyder 4 X 4

Some hard running last weekend caused me to pull a bead on one of my rims. When I went to remove the wheel to fix the tire I noticed I had a hard time taking the wheel off. I discovered this was due to the hex pin spinning 90º in the plastic hub. Time for an upgrade! Vanquish Products 475 Hubs x...

  • Likes: 148
  • View count: 16756
  • Dislikes: 3
  • Comments:
Tags: Axial,wraith,harley,crawler,brushless,ultra4,g6,vanquish,futaba,rcc,rc,bashing,trail,custom,chass...

Jeep JKL Buggy by Poison Spyder Customs (Slideshow Part 4)

Poison Spyder 4 X 4

Poison Spyder Customs build a Jeep JKL Buggy for racing Griffin King of the Hammers 2014 The build thread is here : http://www.pirate4x4.com/forum/general-4x4-discussion/1452090-poison-spyder-2014-koh-build-bajk-aka-crispy.html Vidéo by Arnaud Tromas / Ultra4 Ever.

  • Likes: 18
  • View count: 2611
  • Dislikes: 0
  • Comments:
Tags:

Poison Spyder Front & Rear Bumpers for the Jeep TJ Wrangler

Poison Spyder 4 X 4

Poison Spyder Bumpers for the Jeep TJ are built for the serious off-roader. If you're looking for a bumper with all the must have features for rock crawling, look no further than poison spyder. Winch mounting, d-ring locations, brawler bar grille protection, tire carrier and more. To see our sele...

  • Likes: 26
  • View count: 13433
  • Dislikes: 3
  • Comments:
Tags: Jeep parts,Jeep accesories,4 Wheel Parts,Jeep,Jeeps,Jeep TJ Wrangler,Jeep Bumpers,Jeep Front Bump...