Competition Engineering 3025 8-Point Hoop Roll Cage

Competition Engineering 3025 8-Point Hoop Roll

Main hoop only.Required parts * To get a complete 8-point roll bar kit you mustselect the appropriate main hoop part number and the CEE-30008-point strut kit. Installation notes * Welding requiredThis main roll bar hoop from Competition Engineering is made frommandrel-formed .134 in. wall mild steel tubing. Exceeding therequirements of the NHRA and the IHRA this main hoop will provideyou with added chassis strength for quicker launches and increasedsafety in the event of a crash. Its computer-designed for uniformthickness and a specific fit for your vehicle.Competition Engineering 79-93 Mustang Main Hoop

  • Brand: Competition Engineering
  • ASIN: B000RUAZN0

Competition Engineering C3310 10-Point Roll Cage Strut Kit Only (Main Hoop Kit Sold Separately)

Competition Engineering C3310 10-Point Roll Cage Strut Kit

This Competition Engineering Strut Kit designed for use with their 10 Point Roll Bar Main Hoops helps complete and bridge the gap between an 8-Point Roll Bar and a 12-Point Roll Cage. Meets NHRA requirements for cars running 10.99 or quicker with modified firewalls and/or floorboards. Helps provides increased driver protection in rollover. Increases chassis rigidity for better reaction times. Strut Kit consists of two door bars, two rear struts, six 6" x 6" x 1/8" steel mounting pads and twelve weld joint gussets. Manufactured from 1-5/8" x .134" wall mild steel tubing and all bends are mandrel formed on CNC equipment. Tube ends are notched for better fit and easier installation. Meets NHRA and IHRA requirements. Comes complete with instructions to ensure a hassle-free installation. Welding is required. IMPORTANT NOTE: For a COMPLETE 10 POINT ROLL BAR KIT, a Main Hoop Bar Kit must also be purchased separately. The Main Hoop Kit (sold separately) consists of one mandrel formed main hoop, one top hoop, two front downstruts, one main hoop crossbrace and two diagonal hoop supports designed specifically for your application. Please check with the factory to obtain the exact part number for the Main Hoop Kit that fits your vehicle. IMPORTANT NOTE: For a COMPLETE 10 POINT ROLL BAR KIT, ...

  • Brand: Competition Engineering
  • ASIN: B003KXFVNU
  • UPC: 084663033100

GS Power's Bracket Clamp | choice of 1/1.25/1.75/2 inch. Mount LED Light Bar, Safety Flag, Antenna onto Bar Tube Rack Roll Cage Bumper on Boat Truck ATV Can-Am Bike (2 pc)

GS Power's Bracket Clamp | choice of 1/1.25/1.75/2

  • Brand: GS Power
  • ASIN: B06XZZHFS2

Competition Engineering 3122 8-Point Hoop Roll Cage

Competition Engineering 3122 8-Point Hoop Roll

Main hoop only.Required parts * To get a complete 8-point roll bar kit you mustselect the appropriate main hoop part number and the CEE-30008-point strut kit. Installation notes * Welding requiredThis main roll bar hoop from Competition Engineering is made frommandrel-formed .134 in. wall mild steel tubing. Exceeding therequirements of the NHRA and the IHRA this main hoop will provideyou with added chassis strength for quicker launches and increasedsafety in the event of a crash. Its computer-designed for uniformthickness and a specific fit for your vehicle.Competition Engineering 78-87 Malibu Main Hoop

  • Brand: Competition Engineering
  • ASIN: B000RUFOKO

House Tuning Roof Rack Clamps -Pack 4,1.75" Tube Clamp Bracket,Roll Bar Light Clamp,Roll Bar Mounting Brackets,Tube Light Mount 1 3/4" for Light Bar (1.75"-Clamp Mount kit)

House Tuning Roof Rack Clamps -Pack 4,1.75" Tube

House Tuning Horizontal Bar Clamp Mounting Kit simplifies the installation of the House Tuning off road LED light bars and LED Driving light onto your roof rack, bull bar, or headache rack. House Tuning Clamps design for bar sized at 3/4",7/8",1.0",1-1/8",1-1/4",1-1/2",1-5/8",1-3/4",2.0" in diameter. Interchangeable/Compatible: All sizes of House Tuning Series LED Light Bars and Pods lights Features: Simplifies installation and small size Can be used on tubes of 1.75" in diameter. Package include: 4 x 1.75" Clamp 4set x Rubber Insert for 1.75" tube (8pieces) 1 Set x Mount Screw with Allen Hex Key

  • Brand: HOUSE TUNING
  • ASIN: B072Q2N1PJ

LAMPHUS Cruizer LED Off-Road Light Vertical Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" [2 Clamps] [Includes Allen Hex Key] [User-Friendly] - for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder

LAMPHUS Cruizer LED Off-Road Light Vertical Bar Clamp

Simplify vertical LED light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Vertical Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a piece of cake. Load up your ride with multiple LED lighting accessories without ever having to drill into your vehicle's bodywork. Everything you need for installation is included (even an Allen Hex Key) in this clamp mounting kit!Perfect for off-road, marine, agricultural & other diverse applicationsThis super durable vertical bar clamp mounting kit can be used on tubes measuring 1", 1.5", 1.75" and 2" in diameter. Easily install multiple light bars on a versatile range of applications, including off-road vehicles like Jeeps, ATVs, and lifted trucks, or construction & highway maintenance vehicles.Built to be bulletproof Caringly crafted from premium-grade cast aluminum, these clamps are engineered to provide a strong, stable and secure vertical mount for your off-road light bars. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation.Features:Simplifies LED light bar installation onto your roof rack, ...

  • Brand: LAMPHUS
  • ASIN: B0753YM3VX
  • UPC: 816159024916

Competition Engineering C3182 1-3/4" Tube Swing Out Door Bar Kit

Competition Engineering C3182 1-3/4" Tube Swing Out Door

Meets NHRA Sanctioning rule for OEM full body cars 7.50 E.T. and slowerManufactured for 1-3/4 steel tubingOne kit does one door barIncludes release pin and hinge bracketWelding required

  • Brand: Competition Engineering
  • ASIN: B003KXHQWO

Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Horizontal Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

Nilight 90020B 2-Pack (Standard) Mounting Bracket Kit LED

Nilight horizontal bar Clamp Mounting Kit simplifies the installation of Nilight off road LED light bars onto your roof rack, bull bar or head Rack. The Kit can be used for tubes sized at 1", 1-1/2", 1-3/4" & 2" In diameter. Includes an Allen Hex Key with purchase. Color: Black Color application: can be used on tubes of 1", 1-1/2", 1-3/4" & 2" In diameter. Apply to most off road vehicles, cars, trucks, boats, farm vehicles, construction vehicles, etc. Can work with most LED, HID, Halogen lights, Fog lights, driving lights, LED work light and light bars. Package include: 2 x clamp 2 x 1" Rubber insert (2 pieces) 2 x 1-1/2" Rubber insert (2 pieces) 2 x 1-3/4" Rubber insert (2 pieces) 2 x doubled sided tape 1 x Allen Hex Key.

  • Brand: Nilight
  • ASIN: B0714CYKBJ
  • UPC: 600537016590

Nilight 90023B 2-Pack (Standard) Mounting Bracket Kit LED Off-Road Light Vertical Bar Tube Clamp Roof Roll Cage Holder,2 Years Warranty

Nilight 90023B 2-Pack (Standard) Mounting Bracket Kit LED

Nilight LED off-road light vertical bar clamp mounting kit Nilight vertical bar clamp mounting kit simplifies the installation of Nilight off road LED light bars onto your roof rack, bull bar or head rack. These clamps are designed to provide a strong, stable and secure mount for your off-road light bars and can be used on tubes measuring 1", 1.5", 1.75" and 2" in diameter. Apply to most off road vehicles, cars, trucks, boats, farm vehicles, construction vehicles, etc. Can work with most LED, HID, halogen lights, Fog lights, driving lights, LED work light and light bars. Package include: 2 x clamp 2 x 1" rubber insert (2 pieces) 2 x 1-1/2" rubber insert (2 pieces) 2 x 1-3/4" rubber insert (2 pieces) 2 x 2" rubber insert (2 pieces) doubled sided tape (for 2" tubes). 2 x Allen hex key

  • Brand: Nilight
  • ASIN: B07D9HFFQ6
  • UPC: 726853899188

LAMPHUS 2PC Off-Road LED Light Bar 0.75"/1"/1.25" Horizontal Bar Clamp Mounting Kit [Rubber Teeth] [Aluminum] [Includes Hex Key] [for Bull Bars, Roof Racks, Roll Cages] for ATVs, UTVs, and Trucks

LAMPHUS 2PC Off-Road LED Light Bar 0.75"/1"/1.25" Horizontal

Big Things Come in Small PackagesThis is what a bar clamp should look like.The Mini Bar Clamp allows you to mount lights and light bars, and fits perfectly onto horizontal bars with a smaller diameter such as roof racks, roll cages, or even handlebars. The Mini Bar Clamp fits bars that are .75", 1" and 1.25" in diameter.The Mini Bar Clamp's size means that it can be squeezed into tighter areas while the aluminum body allows it to be both durable and lightweight.The Mini Bar Clamp's sturdy and lightweight aluminum body make it ideal for off-roading and rural areas and are the perfect companion to your ATV, motorcycle or truck.Rubber Meets the Bar The Mini Bar Clamp comes with rubber teeth inserts to create a tighter grip on bars with smaller diameters. The rubber teeth also serve to protect your aluminum bar clamp, and create an ultra-tight grip that doesn't loosen over time. For bars with larger diameters, the mini bar clamp comes with a rubber strip that protects the aluminum teeth from being worn down.Everything You NeedTired of those mounting kits where you need a separate drill bit and screwdriver to mount your bar clamp? Us too. The mini bar clamp kit comes with everything you need to mount your bar clamp, and doesn't require any drilling.  Simply choose the rubber teeth in...

  • Brand: LAMPHUS
  • ASIN: B0791NB4FM
  • UPC: 816159025265

Lightronic Roll Bar Mount 0.75" 1" 1.25" Horizontal Bull Bar Clamp Led Light Bar Mounting Brackets For UTV Light Bar Led Tube Clamp Roof Roll Cage Holder

Lightronic Roll Bar Mount 0.75" 1" 1.25" Horizontal

Product Specification: Lightronic Roll Bar Mount 0.75" 1" 1.25" Horizontal Bull Bar Clamp Led Light Bar Mounting Brackets For UTV Light Bar Led Tube Clamp Roof Roll Cage Holder Diameter:32mm/1.25" (without liner inserts) Diameter:25mm/1" (with thin liner inserts) Diameter:19mm/0.75(with thick liner inserts) Material: strong and light-weighted black aluminum Color: BlackProduct Application: Rubber inserts dampen driving vibration &avoid scraping bullbar surface High quality and Allow to add more lights on vehicle without drilling Fix the light on tube firmly,pre-drilled hole for easy installation Apply to most offroad vehicles,cars,Trucks,boats,farm vehicles etc. Can work with most LED,HID,halogen spotlights/fog lights/driving lights or light barsPacking Description: Pair Black Bull Bar brackets 2 set bolts 1 pc M4 Allen key wrench 2 set different size Rubber Pad

  • Color: Black
  • Brand: lightronic
  • ASIN: B01M3P2DVY
  • UPC: 744750127456

(3 Sticks) Kirkey Black Roll Bar Padding 1-1/2" to 1-7/8" Tubing -99001

(3 Sticks) Kirkey Black Roll Bar Padding 1-1/2"

Kirkey Black Roll Bar Padding 1-1/2 to 1-7/8 Tubing -99001 Offset holes gives more padding protection toward driver

  • Color: Black
  • Brand: Kirkey Seats
  • ASIN: B01F7FUAX4
  • UPC: 010315615615

Alloy 4130 Steel Round Tube - 3/4" x .065" x 72"

Alloy 4130 Steel Round Tube - 3/4" x

4130 steel is a SAE steel grade as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, cro-moly, CrMo, CRMO, CR-MOLY, and similar). They have an excellent strength to weight ratio and are considerably stronger and harder than standard 1020 steel. While these grades of steel do contain chromium, it is not in great enough quantities to provide the corrosion resistance found in stainless steel. Examples of applications for 4130 include structural tubing, bicycle frames, tubes for transportation of pressurized gases, firearm parts, clutch and flywheel components, and roll cages. These steels are also used in aircraft parts and therefore 4130 grade structural tubing is sometimes referred to as "aircraft tubing". 4130 steel is a SAE steel grade as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, cro-moly, CrMo, CRMO, CR-MOLY, and similar). They have an excellent strength to weight ratio and are considerably stronger and h...

  • Brand: Shapiro Supply
  • ASIN: B073FY59RY

Daystar, Universal Pro Mount Camera Mounting System Fits most Point of view POV Style Cameras, Fits 2", 1 3/4", 1 1/2", 7/8" Tubing or roll cage bumper, bar or tube, KU71108KV, Made in America

Daystar, Universal Pro Mount Camera Mounting System Fits

Pro Mount allows you to attach your POV cameras securely to your tubular cages, bumpers and handlebars. Kevlar Infused polyurethane spacers dampen vibration without scratching any finish. Each kit fits round 7/8 inch, 1-1/2 inch, 1-3/4 inch, and 2 inch tubing. The combination of the Daystars American made super durable Kevlar isolators and aluminum hardware makes these the strongest POV mounts on the market today. Keep your POV camera on the action with the Daystar Pro Mount.

  • Brand: Daystar
  • ASIN: B006VJOSZ2
  • UPC: 618089003722

Foam Roll Bar/Cage Padding, Set of 6, Black, 36 Inch

Foam Roll Bar/Cage Padding, Set of 6, Black,

Speedway roll bar padding is made of high-density cellulose, impact resistant foam. This roll cage padding features an offset hole for easy installation and maximum protection in your roll cage. Designed to fit roll bar tubes from 1-5/8" to 1-3/4" O.D. Roll bar foam comes in a 3 foot stick.

  • Color: Black
  • Brand: Speedway Motors
  • ASIN: B07B8VGHN1

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" [2 Clamps] [Includes Allen Hex Key] [User-Friendly] - for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder

LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp

Simplify LED light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze. Deck out your ride with multiple LED lighting accessories without ever having to drill into your vehicle's bodywork. Everything you need for installation is included (even an Allen Hex Key) in this clamp mounting kit!Excellent for off-road vehicle, marine, farm vehicle & other applicationsThis high-quality horizontal bar clamp mounting kit can be used on tubes measuring 1", 1.5", 1.75" and 2" in diameter. Install multiple light bars on a versatile range of applications, including off-road vehicles like Jeeps, ATVs, and UTVs, or construction & highway maintenance vehicles.Precision-crafted quality Painstakingly crafted from premium-grade cast aluminum, these clamps are designed to provide a strong, stable and secure mount for your off-road light bars. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation.Features:Simplifies the installation of LED light bars onto your roof rack, bull bar, or headache ...

  • Brand: LAMPHUS
  • ASIN: B01FETT3FO
  • UPC: 816165022241

SuperATV Heavy Duty Rear Roll Cage Support for Polaris Ranger Midsize 500/570 / EV/ETX/Crew - SEE FITMENT - Wrinkle Black

SuperATV Heavy Duty Rear Roll Cage Support for

  • Brand: SuperATV.com
  • ASIN: B07NGM5D35

Competition Engineering C3000 8-Point Roll Bar Strut Kit

Competition Engineering C3000 8-Point Roll Bar Strut

The Competition Engineering 8-Point Roll Bar Strut Kit is manufactured from mild steel tubing with 1-3/4 inch outer diameter and 0.134 inch width. The Strut Kit consists of two rear struts, two front door bars, main hoop crossbrace, two diagonal hoop supports, six weld joint gussets and six 6 inch x 6 inch x 1/8 inch steel mounting pads to provide a solid mount for the bars. They include complete instructions to ensure a hassle free installation.

  • Brand: Competition Engineering
  • ASIN: B000CIQIGU
  • UPC: 084663030000

Kirkey Gray Roll Bar Padding 1-1/2" to 1-7/8" Tubing -99007

Kirkey Gray Roll Bar Padding 1-1/2" to 1-7/8"

Kirkey Gray Roll Bar Padding 1-1/2 to 1-7/8 Tubing -99007 3 Foot lengths Fire retardent high density padding Offset holes gives more padding protection toward driver

  • Brand: Kirkey Seats
  • ASIN: B009L7ZDLO

House Tuning Roll Bar Mount Clamp,2.0 inche Tube Clamp for Light Bar (2pcs-2.0" Clamp)

House Tuning Roll Bar Mount Clamp,2.0 inche Tube

br> House Tuning Horizontal Bar Clamp Mounting Kit simplifies the installation of the House Tuning off road LED light bars and LED Driving light onto your roof rack, bull bar, or headache rack. The kit can be used for tubes sized at 1", 1-1/4",1-1/2"in diameter. Interchangeable/Compatible: All sizes of House Tuning Series LED Light Bars and Pods lights Features: Simplifies installation and small size Can be used on tubes of 2" in diameter. Package include: 2 x 2" Clamp 2 x Rubber Insert (2 pieces) 1 x Allen Hex Key

  • Brand: HOUSE TUNING
  • ASIN: B075QJGJ2C
Similar Roll Bar Tubing Results
Roll Bar Tubing Video Results

Roll Cage Tubing: Tips for Fitment and Welding

Roll Bar Tubing

Jimmy Shine, owner of Jimmy Shine Workshop, shares roll cage tubing tips for fitment and welding using the Miller® Syncrowave® 210 TIG welder and Digital™ Elite helmet. For more information on the products used, visit www.MillerWelds.com.

  • Likes: 189
  • View count: 51153
  • Dislikes: 43
  • Comments:
Tags: Miller,Welds,Welding,Jimmy Shine,Workshop,hot rod,roll cage,tubing tips,fitment,tips,how to,syncr...

ERW Tubing VS DOM Tubing Flex Test ShootOut

Roll Bar Tubing

Test both side by side till they bend

  • Likes: 445
  • View count: 61262
  • Dislikes: 18
  • Comments:
Tags:

HOW TO GET YOUR WELDS INTO TIGHT GAPS/ ROLL CAGE WELDING

Roll Bar Tubing

Here's a little trick for getting your mig welds into those tight corners. My names Matt Urch and I own and run Urchfab welding and fabrication. I specialise in custom automotive fabrication from building roll cages to complete one off builds. I built the worlds most unique and oldest drift ca...

  • Likes: 719
  • View count: 43855
  • Dislikes: 42
  • Comments:
Tags: mig welding,how to weld,learn how to weld,how to weld into tight gaps,welding tips and tricks,urc...

MIG Welding Techniques for Building a Mild Steel Roll Cage

Roll Bar Tubing

Using proper MIG welding techniques in roll cage fabrication with mild steel is critical to achieving weld quality, and many race cars must pass certification with qualified welds. Fabricating roll cages involves many different joint angles, so MIG gun nozzle placement is key to proper weld fusio...

  • Likes: 3237
  • View count: 887604
  • Dislikes: 120
  • Comments:
Tags: miller welder,miller welders,miller welding,miller electric,miller electric welders,weld,welder,w...

How To Notch Roll Cage Tubing & TIG Weld Diagonal Bar

Roll Bar Tubing

This week I show how to notch roll cage tubing and TIG weld my diagonal bar to my main hoop. As I mentioned last week my main hoop passenger leg needed to shift outward a little bit. To begin with, I cut the diagonal bar a bit long so that it will hold the main hoop to the exact dimension I nee...

  • Likes: 56
  • View count: 1006
  • Dislikes: 0
  • Comments:
Tags: how to notch tubing,how to notch tubes without a tube notcher,roll cage tube notching,roll cage d...