Ametric® , SA 10 K SS Metric Rod End Stainless Steel Self-Lubricating , 10 mm Bore (d1), M 10 Metric Thread (d3), 28 mm Outside Dia. (d6) 14 mm Bearing Width (b1), 11 mm Rod End Head Width (b3), 48 mm Height (h), 29 mm Thread Length (i), 12 Max Degrees of Tilt (o), 0.056 kg (Weight), 23.4 kN (Static Radial Load Rating), 17.4 kN (Static Axial Load Rating), , Price listed is for one rod End., (Mfg Code 1-069)

Ametric® , SA 10 K SS Metric Rod

1-069-SA 10 K SS Ametric® Part NumberWE USE THE PUBLISHED eBay/Amazon CALCULATED SHIPPING RATES. WE DO NOT MARKUP THESE CHARGES. PLEASE CONFIRM THE SHIPPING FEES BEFORE ORDERING. This is an Original unused Ametric(R) product directly from the manufacturer American Metric Corporation. Photos shown are only a general representation of the product listing. Product details are listed in the Ametric.com website.If you don't see the size your need please inquire. We stock over 730,000 machinery components. SA 10 K SS Metric Rod End Stainless Steel Self-Lubricating 10 mm Bore (d1) M 10 Metric Thread (d3) 28 mm Outside Dia. (d6) 14 mm Bearing Width (b1) 11 mm Rod End Head Width (b3) 48 mm Height (h) 29 mm Thread Length (i) 12 Price listed is for one rod End. Max Degrees of Tilt (o) 0.056 kg (Weight) 23.4 kN (Static Radial Load Rating) 17.4 kN (Static Axial Load Rating)

  • Brand: Ametric®
  • ASIN: B00IZN9GBI

American Star 4130 Chromoly 1/2 Inch XMR8 Rod Ends/Heim Joints (Set of 4)

American Star 4130 Chromoly 1/2 Inch XMR8 Rod

You are looking at a set of (4) 1/2 Inch 4130 Chromoly Teflon-Kevlar Lined Right Hand Thread Rod Ends/Heim Joints. These ends have a 1/2 Inch shank and 1/2 inch ID hole. They are 1/2 inch Right Thread Pitch. The body is manufactured out of High Strength Aircraft Grade 4130 Chromoly Steel, Kevlar Reinforced Nylon 12 with PTFE Lined and Chrome Plated for corrosion resistance. The Ball is precision manufactured out of 52100 Bearing Steel, Heat Treated, Hard Chrome Plated and precision ground. This rod end has a 16,250 Lb lateral load rating. You will not get a better quality heim joint-rod end anywhere. We guarantee it. On top of that, you won't beat our price either. These super strong rod ends are most commonly used on Sand Rails, Rock Crawlers, ATV's. Race Cars etc.. Please Note: These Rod Ends Also fit the spindle side of American Star, Fireball Racing, Janssen Racing and Full-Flight A-Arms that utilize a 3/4 Inch Heim Style Ball Joint

  • Color: Chrome
  • Brand: Unknown
  • ASIN: B007IM3GJU
  • UPC: 689466458879

Stainless Steel Threaded Rod 3/8-16 x 3FT (5 Piece Bundle)

Stainless Steel Threaded Rod 3/8-16 x 3FT (5

Made from 18-8 stainless steel, these studs and rods are corrosion resistant and may be mildly magnetic. Length is measured from end to end.

  • ASIN: B00FAVMR28
  • UPC: 799928507202

Steel 3/8 Inch RH Female Heim Joint Rod Ends with Stud

Steel 3/8 Inch RH Female Heim Joint Rod

These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. The RH thread stud has a hex built in for easy installation. Item Details3/8" stud/thread

  • Brand: Speedway Motors
  • ASIN: B075FG4PMG

ARES 70845 | Outer Tie Rod Remover | Drop Forged Steel Design Allows for Application of Up to 5 Tons of Force

ARES 70845 | Outer Tie Rod Remover |

Remove Tie Rods With Up To 5 Tons of Force The ARES Outer Tie Rod Remover features a special design that prevents its jaws from slopping on the steering knuckle, so you can apply up to 5 tons of force to break the tie rod free from the steering knuckle without damaging either the remover or the knuckle. Made of drop forged steel, this tool is made with longevity and durability in mind, and works with front or rear wheel drive import and domestic vehicles, as well as castor stamped steel steering knuckles.   Features:  Includes: 1 pc. Outer Tie Rod Remover Tool Constructed of high quality heat treated drop forged steel Can be used with up to 5 tons of force Design prevents jaws from slopping on steering knuckle Works on front or rear wheel drive imports and domestics and castor stamped steel steering knuckles For a full range of front end service tools, check out the ARES 70840 set

  • Color: black, silver
  • Brand: ARES
  • ASIN: B0797YJW55
  • UPC: 818765028258

Bobrick 6047x60 ClassicSeries 304 Stainless Steel Extra Heavy Duty Shower Curtain Rod with Square End Flange, Satin Finish, 1-1/4" Diameter x 60" Length

Bobrick 6047x60 ClassicSeries 304 Stainless Steel Extra Heavy

ClassicSeries extra heavy duty shower curtain rod. Made of 18 gauge (1.2mm) stainless steel tubing with satin finish. Flanges are 2-1/2" (65mm) square. Flanges - one piece, seamless construction. Measures 1-1/4" diameter by 60" length.

  • Brand: Bobrick
  • ASIN: B00996M644

uxcell SI5T/K, Rod End Bearing, 5mm Inside Dia Economy Self Lubricating Female Right Hand 4pcs

uxcell SI5T/K, Rod End Bearing, 5mm Inside Dia

1. Self-lubricating. Machined carbon steel housing and white zinc female shank with right hand threads2. Spherical rod end bearing for transferring motion between widely separated points.3. It has characteristics of large load capability,easy mounting and dismounting and mechanism simplification.4. Bronze race and hardened, chrome-plated steel ball for strength and resistance to wear and corrosion.5. Widely used in machinery, power tools,automation equipment, CNC equipment, and so on.Specification:Product Name: Rod End BearingPackage Content: 4pcs x Rod End BearingMaterial: Carbon Steel,White Zinc PlatedColor: Silver ToneOutside Diameter: (Head)18mmInside Diameter: (Bore)5mmWeight: 71gModel: SI5T/KThread Diameter: 5mm(RH)Total Length: 36mmUlt. Static Radial Load: 6KNMaximum Angular Misalignment: 13 DegreeCenter Of Ball To Bottom Of Shank: 27mmLength Through Bore: 8mm

  • Color: SI5T/K / 5mm Bore
  • Brand: uxcell
  • ASIN: B074299SPX

American Star 4130 ATV Chromoly Steel Tie Rod Upgrade For Yamaha YFZ 450 04-09, Raptor 660R 01-05, Raptor 700R 06-18, Suzuki LT-A & F 500F Vinson 04-07

American Star 4130 ATV Chromoly Steel Tie Rod

These Tie Rods Have a LIFETIME Structural Warranty. The Yamaha YFZ450 04-09, Raptor 660 01-05 and the Raptor 700 06-17 all have a problem bending the weak OEM tie rods and ends. By replacing the entire stock units with our American Star 4130 Chromoly Tie Rod Upgrade Kit you will virtually eliminate this problem! No more getting stuck in the woods or on the trail. Fits the following ATVS: Suzuki LT-A500F Vinson 2004-2007 Suzuki LT-F500F Vinson 2004-2007 Yamaha YFM 660R Raptor 2001-2005 Yamaha YFM 700R Raptor 2006-2018 Yamaha YFZ 450 2004-2013 Yamaha YFZ 450X 2010-2011

  • Color: Silver Powder Coat
  • Brand: Unknown
  • ASIN: B00OPI61NS
  • UPC: 689466679182

Rod End 3/8 x 3/8-24 ECF6 Female Economy Right Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

Rod End 3/8 x 3/8-24 ECF6 Female Economy

Rod End Directs ECF6 rod end is a high-quality economy rod end with a 3/8'' bore and 3/8-24 internal right-hand threads. This rod end also comes complete with the jam nut, so you don't have to purchase one separately. Both the rod and the jam nut both require a 9/16 wrench to tighten and loosen.

  • Brand: Rod End Direct
  • ASIN: B07HMCL9Y8
  • UPC: 761856751828

2 - NEW SOUTHWEST SPEED 3/8"-24 RIGHT-HAND FINE THREADED STEEL ROD ENDS, HIGH CARBON STEEL 3/8" BALL, PRECISION MACHINED HEIM END FOR RACING, OFF-ROAD, INDUSTRIAL, AND MANY OTHER APPLICATIONS

2 - NEW SOUTHWEST SPEED 3/8"-24 RIGHT-HAND FINE

Pair of Brand New Southwest Speed Rod Ends, Steel (SWS Part # 103-006). 3/8"-24 Right-Hand Fine Threads 3/8" Bore Size Strong Steel Construction Precision Machined High carbon steel ball There are many steel rod ends on the market today that just won't hold up in many high performance applications, these are not in that category. Over the years, Southwest Speed has produced thousands of rod ends with almost no failure. You will not have a "quality problem" with these rod ends.

  • Color: 103-006
  • Brand: Southwest Speed
  • ASIN: B01FT8MY4W

Prescott Plastics 1 5/8 Inch Round Black Vinyl (Tall) End Cap, Flexible Pipe Post Rubber Cover (10)

Prescott Plastics 1 5/8 Inch Round Black Vinyl

High quality Prescott Plastics brand slip-on vinyl soft PVC end caps. These Vinyl End Caps are designed to fit round tubular steel, wood or plastic. Push-fit Vinyl End Caps can stretch onto slightly larger dimensions for a snug fit without tearing, splitting, or shredding. Made in the USA from soft PVC that will hold up for years of use. **DIMENSIONS ARE FOR CAP INSIDE DIAMETER**

  • Color: Black
  • Brand: Prescott Plastics
  • ASIN: B07PFQX6RS
  • UPC: 704022770759

Sealmaster TF 6 Rod End Bearing, Three Piece, Commercial, Non-Relubricatable, Female Shank, Right Hand Thread, 3/8"-24 Shank Thread Size, 3/8" Bore, ±6 degrees Misalignment Angle, 1/2" Length Through Bore, 1" Overall Head Width, 0.906" Thread Length, 4450.0lbf Static Load Capacity

Sealmaster TF 6 Rod End Bearing, Three Piece,

This Sealmaster TF Series three-piece spherical rod end bearing is used in motion transfer linkage assemblies. The housing is made of machined low carbon steel that is plated for corrosion resistance. The bearing has a female shank with right hand threads for connecting to rods, and the shank has wide wrench flats for tightening. The bearing’s race is made of bronze and the alloy steel ball is heat treated and chrome plated for resistance to wear and corrosion. This bearing is lubricated with grease at the factory and requires no additional lubricants. It has a maximum operating temperature of 350 degrees F (177 degrees C). This spherical rod end bearing is suitable for use in various applications such as textile manufacturing equipment, agricultural machinery, and off-road vehicles, among others.Rod end bearings, also called heim joints or spherical rod ends, are articulating joints that are attached to the ends of tie rods, steering links, and cylinders to provide a transfer of motion and force between two points. They consist of a spherical swivel with a cylindrical bore through which a bolt may pass pressed into a housing that has a threaded shank. Rod end bearings are used in applications such as steering linkages, agricultural machinery, and textile manufacturing equipmen...

  • Brand: Sealmaster
  • ASIN: B0071AXDI8
  • UPC: 662288723493

Borgeson 700000 Steel Rod End Bearing

Borgeson 700000 Steel Rod End

Steering Shaft Support BearingSteering Shaft Support Bearing; Steel Rod End; Incl. Two Jam Nuts; Supports All 3/4 in. Splined And Double D;SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: This product can expose you to chemicals including Nickel and Chromium (hexavalent compounds) which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit: www.P65Warnings.ca.govFEATURES:Steering Shaft Support BearingIf more than two joints are used in a steering system, a support bearing must be used to prevent "looping" and binding. Use of a vibration reducer and two u-joints will also call for a support bearing to be used. A system with a double u-joint and a single u-joint has three flex points and will require a support bearing. Support bearings will work with all 3/4" splined or Double D steering shafts. Rod end bearings with a 3/4" hole size are commonly used for shaft supports. Rod end bearings are supplied with two jam nuts for mounting. They are available in steel, stainless steel and polished stainless steel.The Borgeson Universal Company has been manufacturing steering universal joints and components for the industrial, automotive, military and aerospace markets since 1914. P...

  • Brand: Borgeson
  • ASIN: B002L1FAYW
  • UPC: 843975003573

uxcell CS10, Rod End Ball Bearing with Stud, M6x1mm Carbon Steel Right Thread 2pcs

uxcell CS10, Rod End Ball Bearing with Stud,

1. Shank Type: Right Thread2. Spherical rod end bearing for transferring motion between widely separated points.3. It has characteristics of large load capability,easy mounting and dismounting and mechanism simplification.4. Plated carbon steel Y-stud for right angle connections5. Widely used in machinery, power tools,automation equipment, CNC equipment, and so on.Specification:Product Name: Stud Rod End BearingMaterial: Carbon Steel, White Zinc PlatedColor: Silver ToneWeight: 55gPackage Content: 2pcs x Stud Rod End BearingModel: CS10Shank Type:Right ThreadLength to Ball Center: 25mmShank Diameter: 10mm(OD)Radial Static Load Capacity: 15.2KNThread Pitch: 1mmThread Diameter: M6

  • Brand: uxcell
  • ASIN: B07427H69N

QA1 CMR8 Carbon Steel Rod End

QA1 CMR8 Carbon Steel Rod

STRIPHTML($ITEMDESCRIPTION)

  • Brand: QA1
  • ASIN: B009765OYK
  • UPC: 191215106073

Rod End 1/4 x 1/4-28 ECF4 Female Economy Right Hand Rod End Bearing with Jam Nut Included Heim Joint Rod End Direct

Rod End 1/4 x 1/4-28 ECF4 Female Economy

Rod End Directs ECF4 rod end is a high-quality economy rod end with a 1/4'' bore and 1/4-28 internal right-hand threads. This rod end also comes complete with the jam-nut, so you don't have to purchase one separately. Both the rod and the jam nut both require a 3/8'' wrench to tighten and loosen

  • Brand: Rod End Direct
  • ASIN: B07HNKFN1Y
  • UPC: 761856751835

Desunia - 10 Pack - Oval Closet Rod End Supports - Screw on Type - 15mm x 30mm - Polished Chrome

Desunia - 10 Pack - Oval Closet Rod

Desunia... The Closet Professionals!These oval rod end supports are the finest quality you're ever find... bar none! Whether you're outfitting a new closet, or are looking to replace the old end supports in your existing closet with something much nicer, these gems from Desunia are guaranteed to fit any standard 30mm x 15mm rod. Your closet never had it so good!Installation OptionsUnlike our "rear facing pin" type end supports, these supports have "flat backs". We provide matching 1 1/8" long screws for lots if "bite" into any wood surface! Installing over drywall? No problem! Just use the provided hollow wall anchors for sheetrock applications! Once they're attached, just cut your oval rods to length, and you can be hanging clothes up in no time flat.Please keep this in mind!These end cups are ONLY meant for OVAL rods! They will NOT work on ROUND rods!Here's what you get...- 10 polished chrome oval rod end supports- 20 matching screws (1 1/8" long)- 20 Hollow wall anchors

  • Color: Silver
  • Brand: Desunia
  • ASIN: B01BJ9NYSA

Allstar Performance ALL58005 Standard Series 5/16" Steel Right Male Rod End

Allstar Performance ALL58005 Standard Series 5/16" Steel Right

ALLSTAR PERFORMANCE 58005 ROD END STANDARD SERIES

  • Brand: Allstar
  • ASIN: B007ZQOAS0
  • UPC: 848238032420

PCML7 7/16 x 7/16-20 Male Left Hand Rod End with Jam Nut - Alloy Steel Heim Joint Rod End Direct

PCML7 7/16 x 7/16-20 Male Left Hand Rod

Rod End Directs PCML7 rod end is a high-quality Alloy Steel rod end with a 7/16'' bore and 7/16-20 external male left-hand threads. This rod end also comes complete with the jam-nut, so you don't have to purchase one separately. Jam nut requires a 11/16 wrench to tighten and loosen.

  • Brand: Rod End Direct
  • ASIN: B07HV976YM
  • UPC: 761856751729

2-NEW SOUTHWEST SPEED 5/8"-18 LEFT-HAND THREAD POLISHED STAINLESS STEEL 4-BAR ROD ENDS WITH NYLON INSERT & 5/8" STEEL BOLT HOLE, GREAT FOR CLASSIC FORD ROADSTERS, COUPES, SEDANS, T-BUCKETS, HOT RODS

2-NEW SOUTHWEST SPEED 5/8"-18 LEFT-HAND THREAD POLISHED STAINLESS

Pair of Brand New Southwest Speed Polished Stainless Steel 4-Bar Rod Ends that feature a 5/8" Bolt Hole, 5/8"-18 Left Hand Male Threads, and measures 2 7/8" in length from the center of mounting eye to the end of the threads (2 of SWS # 103-3937). Don't settle for a weak 4-bar end made from a piece of tubing that is welded to a bolt. Southwest Speed rod ends are made from steel that is fully polished and features a nylon bushing with a steel sleeve that accepts a 5/8" bolt. These rod ends are perfect for Classic Ford Roadsters, Coupes, Sedans, T-Buckets, Rat Rods, Hot Rods, Street Rods, or any Nostalgia Rod. Rod End Specifications: Steel Sleeve: 5/8" I.D. for 5/8" bolt Threads: 5/8"-18 Left Hand Male Threads Rod End Finish: Polished Rod End Material: Stainless Steel Bushing Material: Nylon Steel Sleeve I.D.: 0.500" Steel Sleeve O.D.: 0.750"

  • Color: Left-Hand, Straight
  • Brand: Southwest Speed
  • ASIN: B072ND1VT8
Similar Steel Rod End Results
Steel Rod End Video Results

R-Joint Rod End and Spherical Bearings

Steel Rod End

RideTech R-Joint and R-Joint-XL are innovative rod end and spherical bearings that feature smooth articulation and long service life by way of a special RTX10 composite cage and spring-loaded closure. R-Joint and R-Joint XL combines the best qualities of all bushing and rod ends such as low frict...

  • Likes: 21
  • View count: 3405
  • Dislikes: 0
  • Comments:
Tags: rod end,heim joint,spherical bearing,ridetech

Shocking rescue of dog impaled by steel rod

Steel Rod End

You have to see this to believe the horror for a dog who got impaled by a steel rod at the base of an electrical pole, upside down, dangling and pinned by the rod which pushed right through her abdomen, almost out her back. She must have jumped from a ledge in the dark and landed on the rod, wher...

  • Likes: 90275
  • View count: 1396328
  • Dislikes: 552
  • Comments:
Tags: help,saved,dog,india,street,rescued,healed,recovery,wound,hospital,animalaid,donate,animal

Stainless Steel Rod Ends Bearings

Steel Rod End

Xiamen Xinhengyi Bearing Co., Ltd. is a professional bearing and housings manufacturer.welcome to buy the high quality Stainless Steel Rod Ends Bearings http://www.szr-bearing.com/product.asp?classid=110&kkk=109&kkk2=110

  • Likes: 1
  • View count: 87
  • Dislikes: 0
  • Comments:
Tags: stainless steel bearings,stainless steel bearing housing,ball bearing,bearing housing,shperical p...

QA1 Rod Ends Heim Joints Steering Suspension Adjustment Connection Threaded Eyelet

Steel Rod End

QA1 Rod Ends Heim Joints Steering Suspension Adjustment Connection Threaded Eyelet http://www.jegs.com/webapp/wcs/stores/servlet/SearchResultsPageCmd?Ntt=QA1+Rod+End&N=&Ns=&storeId=10001&catalogId=10002&langId=-1&Tab=GROUP --------------------------------------------------------------------------...

  • Likes: 14
  • View count: 5053
  • Dislikes: 1
  • Comments:
Tags: JEGS,qa1,rod,end,ends,rods,heim,joint,joints,steering,suspension,adjustment,connection,thread,thr...

Simplest Way to Drill in the Center of ANY Rod!

Steel Rod End

Don't Forget To - LIKE | SUBSCRIBE | SHARE In this tutorial, I'm showing you the simplest way to drill perfectly centered hole in any small rod with simple tools (no lathe required). Support my videos!: https://www.patreon.com/johnnyq90 Subscribe to my channel! https://www.youtube.com/user/jo...

  • Likes: 27124
  • View count: 3720229
  • Dislikes: 3563
  • Comments:
Tags: tutorial,drill,perfect,holes,shaft,rod,easiest,way