Inkbird ITC-308 Heater Cooler Device Temperature Controller Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1200W

Inkbird ITC-308 Heater Cooler Device Temperature Controller Carboy

Specification: Temperature Control Range: -50~99°C / -58~210°F Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F) Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V~240V AC Buzzer Alarm: High and Low Temperature Alarm Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft Input Power Cable Length: 1.5m (5ft) Output Power Cable Length: 30cm (1ft) Body Dimension: 140x68x33mm (5.5x2.7x1.3inch) Socket Dimension: 85x42x24mm (3.3x1.7x1inch) Ambient Temperature: -30~75°C / -22~167°F Storage Temperature: -20~60°C / -4~140°F Humidity: 20~85% (No Condensate) Warranty: 1 Year Package Included: 1x ITC-308 Temperature Controller 1x Manual

  • Color: green
  • Brand: Inkbird
  • ASIN: B01HXM5UAC
  • UPC: 705701565505

Century BNQ-T7B(C) Digital Cooling Temp Controller for Cooling Device 40-10, 3.15 x 1.69 x 4.70, Black

Century BNQ-T7B(C) Digital Cooling Temp Controller for Cooling

The digital cooling controller is designed to control cooling device in order optimize crop-specific growing requirements. Easy to use, a digital display controls the devices' output temperature, which ranges from 40 to 108 °F (5 - 42°C). Depending on the user's preference, the temperature can be toggled to display in degrees fahrenheit or celsius. Our digital thermostats feature a standard, three-prong ground plug and are compatible with all heat mats. Provides constant optimal temperatures. Protect your safety with isolated strong wires and ETL certificate. How to adjust temperature setting: Press and hold ‘Set’ button for 3 seconds to enter the temperature selection mode, Press ‘Up’ or ‘Down’ button to adjust the temperature, Press ‘Set’ button again to select the displayed temperature as the target, Press ‘Set’ button to display the preset temperature. Current measured temperature will be shown when no button is activated.

  • Color: Black
  • Brand: Century
  • ASIN: B01LZV591B
  • UPC: 726179400372

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A

bayite Temperature Controller BTC201 Pre-Wired Digital Outlet Thermostat,

Please unplug devices from the controller when not in use. When the power comes back on after a power failure the unit will act as if it has been turned on again and will power the ouputs. To disable power, unplug the device. Do not rely solely on the power button. The BTC201 temperature controller can turn on/off an electric appliances at desired temp. For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). the controller itself doesn't change temp. Main features: 1-YEAR Warranty Plug and play. Maximum load: 1100W @110V. On/Off Control, Heating and Cooling Celsius or fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(You can use this feature to alarm you when the temperature overshoots your desired temperature) Specification: 1.Power supply: AC 110V - 240V 50/60Hz 2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C 3.Temperature resolution: 0.1 4.Accuracy: ±0.5 5.Working mode: Heating and Cooling mode 6.Max span between turn-on degree and turn-off degree is 25 7.Control resolution: 0.1 8.Power con...

  • Brand: bayite
  • ASIN: B01KEYDNKK
  • UPC: 711463671453

Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller with Outlet 10A 120V 1100W

Inkbird ITC-308 Temperature Controller with IHC-200 Humidity Controller

Specification:Temperature Control Range: -58~210°FHumidity Control Range: 5~99.99%RH Temperature Accuracy: ±1°F (-50~160°F) Humidity Accuracy: ±3%RH Both of them input power are 100~240VAC, 50Hz/60Hz and currant are 10A. The temperature NTC sensor is waterproof. Grade is IP68. Its probe diameter is 40mm * 5mm Package Included:1 x Dual Stage Temperature Controller 1 x Humidity Controller 2 x Manual

  • Brand: Inkbird
  • ASIN: B01N56KEU6

WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch Sous Vide Controller NTC 10K Sensor Improved Version

WILLHI WH1436A Temperature Controller 110V Digital Thermostat Switch

The WH1436 temperature controller can turn on/off an electric appliances at desired temperature. For example, you can use the controller to turn on a heater at 99. 9 F and turn it off at 100 F. Or turn on a freeze at 52 F and turn it off at 45. 3 F. (Please be noted that the controller itself doesn't change temp. You need to use heater or refrigeration equipment with it. ) Main features: Plug and play. No worry about wiring. Maximum load: 1100 watts @110 volts Heating OR refrigeration working mode. Celsius or Fahrenheit read-out. Temperature calibration. Compressor delay protection time setting. High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature) Auto shut off timer(It doesn't turn off the controller itself. The timer just turns off the load when specified minutes counts down to 0. ) Specification: 1. Power supply: AC 110V 50/60Hz 2. Measure range: -58 ~ 230 F(-50 ~ 110 C) 3. Temperature resolution: 0. 1 4. Accuracy: 0. 5 5. Working mode: Heating OR Cooling mode 6. Slew range of temp controlling: 0. 1 - 230(difference between turn-on degree and turn-off degree) 7. Control resolution: 0. 1 8. Power consumption: less than 3W 9. Relay contact capacity: 10A 10. Store s...

  • Color: White
  • Brand: WILLHI
  • ASIN: B00V4TJR00
  • UPC: 711463669641

Century Digital Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 40-108°F

Century Digital Heat Mat Thermostat Controller for Seed

The Century Digital Heat Mat Thermostat Controller allows gardeners to select and maintain optimum; Rooting temperatures for faster seeding or cutting growth. It is compatible with many other heat mats. It works great for controlling plant or pet heat mat temperature. Programming: 1. To display in celsius, Please Press and Hold "DOWN" button for 3 seconds. Press and Hold "UP" button for 3 seconds to display temperature in Fahrenheit. 2. To adjust the temperature setting, Press and Hold "SET" button for 3 seconds to enter the temperature selection mode. Press the " UP" or "DOWN" button to adjust the temperature that you want to set. Then Press "SET" button again. So the setting temperature is done. Press "SET" button to display the preset temperature. When the unit is plugged into an electrical outlet, the "POWER" LED becomes lit, the heat on only when the "HEATING" LED is lighted. When the preset temperature is reached, the "HEATING" LED will turn off and there is no power to the heat mat. ATTENTION: If the thermostat remains "ON" ( delivering power to the heat mat) for more than 5 consecutive hours, it indicates the desired temperature is not being reached. To achieve higher temperature the Mat may need to be placed on a more insulated surface. Covering the seedling tray with a ...

  • Color: Black
  • Brand: Century
  • ASIN: B01I15S6OM
  • UPC: 680474115723

RANCO ETC-111000 Digital Cold Temperature Control New

RANCO ETC-111000 Digital Cold Temperature Control

RANCO ETC-111000 Digital Cold Temperature Control NEW. Dimensions: 6.52 inch high x 2.7 inch wide x 2.48 inch. SPDT output relay. 12/240 Input Voltage.

  • Brand: Ranco
  • ASIN: B0015NV5BE
  • UPC: 686608004338

Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays ITC-1000

Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat

Inkbird All-Purpose Digital Temperature Controller Fahrenheit & Centigrade Thermostat w Sensor Cooling/Heating Specification: Output: 2 Relays Temperature Measuring Range: -50~210°F / -50~99°C Resolution: 0.1°F / 0.1°C Accuracy: ±1°F (-50~160°F) / ±1 °C (-50~70°C) Power Supply: 110VAC 50Hz/60Hz Power Consumption: 3W Sensor: NTC Sensor Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC) Ambient Temperature: 0~60°C Storage Temperature: -30~75°C Relative Humidity: 20~85% (No Condensate) Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm Product Size: 75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)Package Included: 1x ITC-1000 Temperature Controller 110v with 6.67 NTC Sensor FAQ: Q1: How to wire? I can hear the relay inside the unit click, but I can't get any voltage on the cool or heat terminals. A1: IMPORTENCE: Please don't forget to wire the Heating and Cooling device to Power supplier and make a circuit. Q2: The cooling device doesn't work, even though the temperature reaches TS+DS, and the Cool indicator lamp is flashing. A2: The cooling has delay function. If you want to run immediately and don't need the PT function, you can set PT=0.

  • Brand: Inkbird
  • ASIN: B00OXPE8U6
  • UPC: 709803350489

Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature Controller Outlet 110V 1200W Digital Temp Control Greenhouse Aquarium Heater Cooler Reptile Brewing Fermentation Kegerator Probe

Inkbird ITC308 Freezer Thermostat Heating Cooling Plug Temperature

Features: Temperature Control Range : -50~99 °C / -58~210 ° F Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~240V AC Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Socket: 85x42x24mm(3.3x1.7x1inch) Sensor Length: 2m / 6.56ft Input Power Cable Length: 1.5m (5ft) Output Power Cable Length: 30cm (1ft) Buzzer Alarm: High and Low Temperature Alarm Temperature calibration Over-temperature and sensor fault alarm Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Sensor Type: NTC sensor (Including) Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Humidity 20~85% (No Condensate) Warranty: 1 Year It has certificate of EMC, LVD, RoHS, FCC compliance. Package Content: 1x Temperature controller ITC308 1x Manual

  • Brand: Inkbird
  • ASIN: B015E2UFGM
  • UPC: 705701596103

Refrigerator or Freezer Thermostat (Temperature Controller)

Refrigerator or Freezer Thermostat (Temperature

With the thermostat control you can turn any freezer or refrigerator into a sophisticated lagering device and more accurately control the temperature of your ales. Simply place the temperature probe into the freezer, plug the thermostat into the outlet and then your freezer into the Control. This thermostat has a range from 30 degrees F to 80 degrees F.

  • Color: Multiple
  • Brand: Learn To Brew LLC
  • ASIN: B000EXROSE
  • UPC: 798527528090
Similar Temp Controller Results
Temp Controller Video Results

How to Set up the InkBird ITC-308 temp controller for BEER

Temp Controller

Link to this temperature controller on Amazon: https://amzn.to/304VCDh ====================================================== Hey youtubers, so this is one of the temperature controllers i use for my beer fermenting chamber. I use a deep freezer and convert it using this controller. It works g...

  • Likes: 28
  • View count: 6385
  • Dislikes: 6
  • Comments:
Tags: BEER,fermenter fridge,temperature controller,inkbird,inkbird itc-308,thermostat,how to make,how t...

Controlling temperature with a PID controller

Temp Controller

Give us a call 254-681-1760 visit www.barleyandhopsbrewing.com like us on facebook

  • Likes: 362
  • View count: 47170
  • Dislikes: 14
  • Comments:
Tags: still,heating a still,making mash,barleyandhops,barley,How to heat a mash,PID controllers,using a...

Digital Temperature Controller Review

Temp Controller

In this video, I review and show how to use a super cheap and versatile digital temperature controller. Here's the one I purchased: http://www.amazon.com/gp/product/B00F05UI8O/ Many different models are available, differing in voltages, unit of measurement, etc. Stay tuned for a future video s...

  • Likes: 435
  • View count: 141790
  • Dislikes: 35
  • Comments:
Tags: temperature controller,digital temperature controller,diy temperature control,Temperature Control...

Setting up a chest freezer with a temp controller

Temp Controller

In this video I set up a chest freezer with a temp controller. I use the Inkbird controller and Haier chest freezer. Manual: http://pmod79883.pic31.websiteonline.cn/upload/2016_2dds.pdf _______________ Feel free to subscribe (good things will happen. I promise): https://goo.gl/1qHJ88 Instagr...

  • Likes: 157
  • View count: 38117
  • Dislikes: 25
  • Comments:
Tags: haier,haier chest freezer,temp controller,setting up temp controller,inkbird temp controller,temp...

NEW BETTER INSTRUCTION ON HOW TO USE WH1436A TEMPERATURE CONTROLLER

Temp Controller

Email surport: [email protected] Manual download: http://bit.ly/2u8azYk Someone says that I just want to keep temperature at a piont. For example, I want to turn off a device once temp is over 100F and turn on the device once temp is below 100F. Well, in order to keep the temperature closes...

  • Likes: 53
  • View count: 15906
  • Dislikes: 2
  • Comments:
Tags: sous vide controller