Climax Metals SD-048048-58FD Threaded Shaft Rubber Expansion Sanding Drum with 5/8-11 RH Threaded Shank, 3" x 3"

Climax Metals SD-048048-58FD Threaded Shaft Rubber Expansion Sanding

Climax Part SD-048048-58FD, Threaded Shaft Sanding Drum, 3 inch Drum Diameter, 5/8-11RH inch Bore, SD-048048-12FD inch Drum Width.

  • Brand: Climax Metals
  • ASIN: B00YDW8VDE
  • UPC: 044861030059

Aluminum Rod 15/32" (12mm) Diameter x 39.4" Length (100cm) - Round, Shaft Threaded 10x1.5mm

Aluminum Rod 15/32" (12mm) Diameter x 39.4" Length

Aluminum Rod 15/32" (12mm) Diameter x 39.4" Length (100cm) - Round, Shaft Threaded 10x1.5mm

  • Brand: EISCO
  • ASIN: B00XWPPCUS
  • UPC: 849230027414

Clesco AS-4FS 1/2" Motor Arbor to 1/2" Threaded Shaft Adapter

Clesco AS-4FS 1/2" Motor Arbor to 1/2" Threaded

Converts electric motor to Grinder or Buffing machine. Fits 1/2" Motor Shafts. Converts 1/2" motor shaft to 1/2" Threaded shaft. Wheel Widths Up To 1 1/16 in. O.A.L. 3.50 in. Washer Dia. 1.625 in. Lock on to motor shaft with 2 hex set screws. 1/2"-20 Right Hand thread. Holds Grinding wheels, Wire wheels or Buffing wheels with 1/2" hole.

  • Brand: Clesco
  • ASIN: B07FV7BVCW
  • UPC: 044861025895

Gems Sensors 3R1C0 316 Stainless Steel General Purpose Probe, 1/4" NPT Male, 1' Length

Gems Sensors 3R1C0 316 Stainless Steel General Purpose

Gems probes are metallic rods with threaded ends that screw into a fitting that extends vertically down into the liquid. Series 3R: 1/4" (0.64 cm) threaded rod. 1' probe length. 1/4" NPT male.

  • Brand: Gems Sensors
  • ASIN: B009NAM0AG

Takane Quartz Clock Movement Mechanism With 3" Black Spade Hands and Red Second Hand, U.S.A. Made (11/16" threaded shaft for dials up to 1/2" thick)

Takane Quartz Clock Movement Mechanism With 3" Black

This an accurate dependable American made movement. The movement Case measures 2-1/8"W x 2-1/8"H x 5/8"D. The shaft diameter is 5/16". Includes 3"minute hand, hour hand, and second hand. 11/16" threaded shaft has an overall length of 15/16", 9/16" threaded shaft has an overall length of 13/16", 7/16" threaded shaft has an overall length of 11/16", 5/16" threaded shaft has an overall length of 9/16".

  • Color: Red
  • Brand: Takane
  • ASIN: B01H6HIK6A
  • UPC: 711599219529

5/8"Bore Solid Steel Zinc Plated Shaft CollarsSet Screw Style (4 PCS)

5/8"Bore Solid Steel Zinc Plated Shaft CollarsSet Screw

5/8"Bore Solid Steel Zinc Plated Shaft CollarsSet Screw Style (4 PCS)-Brand New-Free Shipping within the Continental United States-Same business day order processing before 12:30PM PDT-Satisfaction Guaranteed-Quantity Per Order: 4 PiecesStyle: Carbon Steel with Zinc Plated CoatingBore Size: 5/8 InchMaterial: Carbon Steel with Black Oxide CoatingProduct Description: This Jeremywell setscrew shaft collar is made of carbon steel with zinc-plated steel coating. The setscrew-type shaft collar has improved holding power when the shaft material is softer than the setscrew material which supporting low axial loads and simple positioning. It is made of carbon steel for weld ability and its zinc plated coating will provide a better resistance to corrosion than the regular steel. This collar comes with a socket cup-point setscrew for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 121 degrees C (0 to 250 degrees F). This shaft collar fits in various applications and can be found in nearly all types of machinery and industry. For instance, gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby cr...

  • Brand: Jeremywell
  • ASIN: B0197MHINI

Takane Quartz Clock Movement Mechanism, Choose Your Hands and Size, USA Made (7/16" Threaded Shaft for dials up to 1/4" Thick, P Hands with Black Second Hand)

Takane Quartz Clock Movement Mechanism, Choose Your Hands

This an accurate dependable American made movement. The movement Case measures 2-1/8"W x 2-1/8"H x 5/8"D. The shaft diameter is 5/16". Includes minute hand, hour hand, and second hand. 11/16" threaded shaft has an overall length of 15/16" and 7/16" threaded shaft has an overall length of 11/16". Installation instructions: Time Setting -IF YOUR KIT INCLUDES GOLD MINUTE AND HOUR HANDS REMOVE PROTECTIVE FILM PRIOR TO INSTALLATION. 1. Put minute hand on its shaft (secure it with the hand nut). Turn the hand set knob on the back of the movement until the minute hand is at 12 o'clock position. Remove the minute hand and the nut 2.Mount the hour hand on its shaft at the 12 o'clock position. Put the minute hand on its shaft and secure with the hand nut. Hands are now in an aligned position for time setting. Install the second hand/blank plug only enough so that it grabs the second hand shaft, do not bottom out the second hand/blank plug against the minute hand shaft. 3. Turn the hand set knob on the back of the movement to set it to the proper time. 4. WARNING. Never try to set the time by moving the hands. You will strip internal gears and void the warranty. 5.Check that none of the hands are in contact with one another at any point along the length of the hands, this will result in ina...

  • Color: P hands with black second hand
  • Brand: Takane
  • ASIN: B071HCWT8Z
  • UPC: 711599220082

SPEEDAIRE 6" Hook-and-Loop Disc Backup Pad, 5/16"-24 Threaded Shaft Back Mount, 12,000 Max. RPM, 1 EA

SPEEDAIRE 6" Hook-and-Loop Disc Backup Pad, 5/16"-24 Threaded

Item: Disc Backup Pad Disc Diameter: 6" Face Mounting Type: Hook-and-Loop Back Mounting Type: Threaded Shaft Back Mounting Size: 5/16"-24 Max. RPM: 12,000 Density: Medium Vacuum Hole Design: Non-Vacuum Thickness: 3/8" Body Material: Foam

  • Brand: CAI - SPEEDAIRE
  • ASIN: B07H9KZK4H
  • UPC: 727079849049

DC 6V Gear Motor with Long M355MM Lead Screw Thread Output Shaft 30/60/100/150/200/300/400/500RPM(6V 30RPM)

DC 6V Gear Motor with Long M355MM Lead

Specifications: Voltage: DC 6V Speed: 30RPM, 60RPM, 100RPM, 150RPM, 200RPM, 300RPM, 400RPM, 500RPM(Optional) Output Shaft Length: 55mm / 2.16" Output Shaft Diameter: M3 Package Includes: 1 x Gear Motor

  • Brand: Walfront
  • ASIN: B07556CZL1
  • UPC: 736691433314

Cressi 6.5mm Shaft for Apache and Apache Lion Fish Spearguns

Cressi 6.5mm Shaft for Apache and Apache Lion

Notched and threaded shaft to allow a harpoon or spear head to be attached.Will accept any Cressi threaded spear tip.

  • Color: Silver
  • Brand: Cressi
  • ASIN: B01IUS6E80
  • UPC: 843607043854

TRIGORILLA ANYCUBIC Screw Rod -300mm, 3D Printer T8-2 8mm Lead Threaded Linear Rail Bar Shaft & Brass Nut

TRIGORILLA ANYCUBIC Screw Rod -300mm, 3D Printer T8-2

Specifications:Lead Screw Diameter: 8MM Lead: 8mm Material: 304 stainless steel Package included: 1 x T8 lead Screw

  • Brand: TRIGORILLA
  • ASIN: B07KXQ2CTY

Clesco AS-5FS 5/8" Motor Arbor to 1/2" Threaded Shaft Adapter

Clesco AS-5FS 5/8" Motor Arbor to 1/2" Threaded

Converts electric motor to Grinder or Buffing machine. Fits 5/8" Motor Shafts. Converts 5/8" motor shaft to 1/2" Threaded shaft. Holds Grinding wheels, Wire wheels or Buffing wheels with 1/2" hole. Wheel Widths Up To 1 1/16 in. O.A.L. 3.50 in. Washer Dia. 1.625 in. Lock on to motor shaft with 2 hex set screws. 1/2"-20 Right Hand thread. .

  • Brand: Clesco
  • ASIN: B077BJ4C2S
  • UPC: 044861027486

Ruland TSP-24-12-F Two-Piece Clamping Shaft Collar, Threaded, Black Oxide Steel, 1.500"-12 Bore, 2 3/8" OD, 9/16" Width

Ruland TSP-24-12-F Two-Piece Clamping Shaft Collar, Threaded, Black

This Ruland two-piece clamping shaft collar has a threaded bore and is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing components. It accommodates a greater variety of shaft diameters than setscrew collars and is effective on both hard and soft shafts. This collar has a threaded bore for installing on threaded shafts. Threaded collars create a positive mechanical stop against the shaft to support preloading of bearings and other components and to allow for higher axial loads and finer adjustments than smooth bore designs. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with forged socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -40 to 176...

  • Brand: Ruland
  • ASIN: B0063LA38O
  • UPC: 634529029541

Centurion 1081 Threaded Shaft Square Flange Motors 1 1/2 HP B849

Centurion 1081 Threaded Shaft Square Flange Motors 1

Centurion 1081 Square Flange 1.5 HPThreaded Shaft Replacement Motor B849 HP 1-1/2 RPM 3450 Volts 23

  • Brand: AO Smith
  • ASIN: B005Q5WLO2
  • UPC: 011278294688

AlveyTech Jackshaft Threaded Shaft for the Baja Motorsports Mini Bike MB200

AlveyTech Jackshaft Threaded Shaft for the Baja Motorsports

Jackshaft shaft with threaded end for the Baja Motorsports Mini Bike MB200. This jackshaft is press fit between two 6203ZZ bearings on the jackshaft assembly. Compatibility Compatibility: Baja Motorsports Mini Bike MB200 (Heat, Mini Baja, Warrior) Coleman CT200U Trail Hensim Mini Bike MB200 (Heat, Mini Baja, Warrior)

  • Brand: AlveyTech
  • ASIN: B01MUQPAR2
  • UPC: 753760825467

Creative Hobbies Quartz Clock Motor Movement, C91MQR, 1/4 Inch Max Dial Thickness, 5/16 Inch Threaded Shaft Length, Complete Kit

Creative Hobbies Quartz Clock Motor Movement, C91MQR, 1/4

Creative Hobbies Quartz Clock Motor Movement Kit includes everything needed to repair, replace, or make your own DIY clock project! Accurate to 2 minutes a year and runs up to 2 years on one AA Battery (not included). Includes hardware, hanger, 3" gold hands. Measures 2-1/8" Square x 5/8" thick with 5/16" diameter shaft for 3/8" hole. USA owned, based and operated business 100%!

  • Color: Gold
  • Brand: Creative Hobbies
  • ASIN: B01N33ESLM
  • UPC: 816682020263

OEM Technologies Vertical Axial Cam Pump Kit 3000 PSI at 2.5 GPM

OEM Technologies Vertical Axial Cam Pump Kit 3000

OEM Axial cam pumps are highly efficient, minimize engine load while delivering top performance, and have a 1 year limited warranty.  OEM Pumps are maintenance free with precision polished stainless steel pistons for improved seal life. These OEM pumps are equipped with high performance double high pressure seals. OEM pumps feature stainless steel integrated unloader featuring our easy-start system as standard. 1 Year limited OEM pump warranty

  • Brand: OEM Technologies
  • ASIN: B00TQLMNF4
  • UPC: 879399001468

Riffe Euro 9/32" (7.1mm) Diameter 6mm Threaded Traveler Shaft - 31"

Riffe Euro 9/32" (7.1mm) Diameter 6mm Threaded Traveler

Made of heat treated spring stainless steel. CNC machined and features our custom designed Mini Shark-Fin tabs rather than notches. Designed for RIFFE Euro Series spearguns and most other brands of European style band powered spearguns. 9/32" (7.1mm) Euroshafts come standard with large shark-fin tabs. Mini tabs are available upon request. Size Chart 31" - 55cm speargun 42" -75cm speargun 46" - 90cm speargun

  • Brand: Riffe
  • ASIN: B01H2HSNJI
  • UPC: 737069922270

Makita B-43359 Hollow Socket, 3/4 x 6-Inch

Makita B-43359 Hollow Socket, 3/4 x

The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4" hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.

  • Brand: Makita
  • ASIN: B00R2HHT2Q
  • UPC: 088381443289

Climax Metal TC-075-16 Shaft Collar, One Piece, Threaded, Black Oxide Finish, Steel, 3/4" Bore, 1-3/4" OD, 1/2" Width, With 1/4-28 x 5/8 Set Screw

Climax Metal TC-075-16 Shaft Collar, One Piece, Threaded,

This Climax Metal one-piece clamping shaft collar has a threaded bore and recessed screw head and is made of black oxide steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts. This collar has a threaded bore for installing on threaded shafts. Threaded collars create a positive mechanical stop against the shaft to support preloading of bearings and other components and to allow for higher axial loads and finer adjustments than smooth bore designs. This collar has a recessed screw head that provides an exterior profile free of major projections for increased safety. It is made of steel for weldability and rust resistance with a black oxide finish for a decorative appearance and resistance to white corrosion, chipping and flaking, and stick-slip of the screw during torqueing, improving the collar's grip on the shaft. Black oxide also provides mild corrosion resistance and improved lubricity. This collar comes with socket-head cap screws for securing the collar onto the shaft. The operating temperatures for this collar range from -17 to 148 degrees C (0 to 300 degrees F). This s...

  • Brand: Climax Metals
  • ASIN: B000P0S2ZA
  • UPC: 044861506462
Similar Threaded Shaft Results
Threaded Shaft Video Results

Built myself a custom CNC Follow Rest for threading long shafts.

Threaded Shaft

A while back we received an order for a decent quantity of these long threaded shafts. The thread was an acme screw thread and we could not get it done with out supporting the shaft while threading. So we built ourselves a custom CNC follow rest that bolted down to the side of the carriage an...

  • Likes: 249
  • View count: 32055
  • Dislikes: 17
  • Comments:
Tags: CNC,Machining,Lathe,Threading,Zala Machine

Solidworks/Swept Cut #4 Drawing Thread/Threaded Rod or Bolt

Threaded Shaft

This is quick & simple tutorial for solidworks beginners starting working with advanced functions. Follow simple steps to learn Solidworks art! Round to square sheet metal chute from two same parts. SUBSCRIBE!

  • Likes: 70
  • View count: 31526
  • Dislikes: 5
  • Comments:
Tags: sw,solidworks 2015,solidworks,swept cut,thread,solidworks thread,SW thread,drawing thread,pitch,s...

Another Thread Cutting Video?!

Threaded Shaft

Thread cutting on the lathe. I know, I know, but had a few requests, thought I'd oblige. This is pretty general -- to help keep it clear and hopefully easy to understand/follow. Who knows, maybe it helps a few kids out. Enjoy! Music: "Jazz In Paris - Media Right Productions "

  • Likes: 23064
  • View count: 1378468
  • Dislikes: 595
  • Comments:
Tags: cutting threads,cutting threads on the lathe,grinding HSS,thread dial,machinist puzzle,machinists...

Section 2.7 Threaded Shaft

Threaded Shaft

This is an exercise in a book by Huei-Huang Lee. For complete resources of the book, please visit http://myweb.ncku.edu.tw/~hhlee/Myweb_at_NCKU/SWG2015.html

  • Likes: 3
  • View count: 865
  • Dislikes: 0
  • Comments:
Tags:

What Are Threaded Shaft Collars?

Threaded Shaft

In this segment, we will be discussing about what are Threaded Shaft Collars https://www.ruland.com/shaft-collars/threaded-shaft-collar.html

  • Likes: 0
  • View count: 46
  • Dislikes: 0
  • Comments:
Tags: