MaxxAir HVHF 12COMBO Heavy Duty Cylinder Fan with 20-foot Vinyl Hose, High Velocity Portable Utility Blower/Exhaust Axial Hose Fan, 12-Inch, Yellow

MaxxAir HVHF 12COMBO Heavy Duty Cylinder Fan with

"This MaxxAir high-velocity 12-inch axial hose fan is the ideal fan for limited access areas. It is perfect for crawl spaces, attics and basements. It may be used for intake or exhaust, depending on which end the hose is atttached. It comes with a 20-foot heavy duty 2-ply polyvinyl flex hose with steel support coils, hanger rings and cinch-strap, and a 6-foot power cord. It has 2,000 CFM and a 2-speed 120V enclosed motor. It is UL listed for outdoor use with GFCI outlet (not included). It is made of heavy duty yellow coated steel. Use for blower or exhaust, connect hose to intake/outake end of fan. Provides directional airflow to limited access areas. Includes 12"" portable hose fan/blower with 20ft long, 8 inch diameter flexible hose. 120V enclosed motor. Yellow steel construction for durability. Hose is 2-ply yellow polyvinyl with steel support coils and hanger rings. UL listed for outdoor use with GFCI outlet (not included). OHSA compliant powder-coated grille. 6' power cord. UL listed. 1-year limited warranty. Our hose fans / exhaust fans / blower fans are the perfect utility fan for every need. They are tough, rugged, powerful fans with ducts and ducting to get the job done."

  • Color: Yellow
  • Brand: Maxx Air
  • ASIN: B004GHNKU0
  • UPC: 047242061284

TOTOOL Ventilator Blower 12" Potable Industrial Utility Fan High Velocity Blower Fan Ventilator Fume Extractor with Duct Hose (12" w/ hose)

TOTOOL Ventilator Blower 12" Potable Industrial Utility Fan

12" Potable Industrial High Velocity Ventilator Blower Fan Fume Extractor with Duct Hose This 12" high velocity ventilator blower fan is constructed with high quality tough steel for super durability, strength and safety. It is lightweight that can be easily taken to anywhere you wanted with strong convenient carrying handle. This fan is mainly used for low wind pressure, air flow of the occasion. It is widely applicable in factories, basements, shipyards, farms, grain storage, chemical, Pharmaceutical, tobacco, tunnel, automobile manufacturing, auto repair factory, logistics, hotels, hotel kitchen, playground, shopping malls, bars, kiln, tile factory, steel factory, mining, plastic machinery, paper mills and other ventilation. Item Specification: Input Power: axial motor 520W Air Flow: 65m3/min (2295 CFM) Diameter of the fan: 12" Body pressure: 373pa Voltage: 110V/ 60Hz Net weight: 25.3 lb Duct Hose:500mm Speed: 3300 RPM Noise: 71 db(a) Protection grills protection grade: ip54 Features: Offer high output Remove stale air rapidly 100% copper wind motor With strong convenient carrying handle and rubber feet Widely used in factories, basements, shipyards, farms, etc Tough steel construction for super durability, strength and safety Package Included: 1 x user manual 1 x 5m Duct H...

  • Color: 12" with hose
  • Brand: TOTOOL
  • ASIN: B075R74R3G
  • UPC: 719034841373

Aoyue 486+ Fume Extractor and Smoke Absorber Fan with Exhaust hose and light

Aoyue 486+ Fume Extractor and Smoke Absorber Fan

This is a great benchtop smoke absorbing fan for soldering, brazing or welding work. The outside dimensions are 7.5" x 6.5" x 3 1/2" The active carbon is 4 1/2 x 4 1/2"Uses a standard 4" aluminum dryer house (included)

  • Brand: Aoyue
  • ASIN: B0793LBRWK
  • UPC: 706919990301

Hon&Guan 4 Inch Extractor Fan High Efficiency Mixed Flow Ventilation System Exhaust Air for Bathroom Kitchen Inline Duct Fan (S Series)

Hon&Guan 4 Inch Extractor Fan High Efficiency Mixed

HS-100S Parameters - Double Speed: Low/High - Voltage: 110-120 V - Frequency: 60 Hz - Power: 30/38 W - Speed: 2100/2600 (RPM) - Air Volume: 128-170 m³/h - Air Pressure: 106/132 Pa - Noise: 26/31 dB - Life: Over 50000 Hours - Weight: 1.3 KG - Current (Amps): 0.45/0.55 - Electric Current Type: AC - Blade Material: ABS Plastic - Item Dimensions: 9.7*5.5*6.5 Inch - Diameter: 4 Inch Application HF Mixed Flow Fan can be used for exhaust and supply ventilation systems that require high pressure, hige efficiency airflow and low noise levels. With a range Applications of sizes that include 75mm, 100mm, 125mm HS fan can be used with rigid and flexible ducting. The HS Mixed Flow Fan are the ideal solution for air exhaust systems for rooms with high humidity such as bathrooms and kitchen, as well as ventilation for apartments, house, shops, cafes, restaurant, cinemas etc. Design The motor is attached to the body of the fan by two quick release clips which enables the motor to rotate to provide connection for confined spaces and removal for maintenance without removing the whole fan or duct. All models have an option of standard which has a two speed motor or overrun timer option variable range of 1 to 30 minutes. Motor The single phase ball bearing motor has two speeds and is equipped wit...

  • Color: White
  • Brand: Hon&Guan
  • ASIN: B01N9FAYGB
  • UPC: 767550215505

Fume Extractor, Rectangular Nozzle

Fume Extractor, Rectangular

' Fume Extractor Loc Line Kit, Material Acetal, For Use With Mfr. No. FA431, Application Soldering Fumes, Features Rectangular Nozzle '

  • Brand: Hakko
  • ASIN: B00NSQYU9K
  • UPC: 641328061979

Soldering Smoke Absorber, Anti-static Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover Fume Extractor Filter Air Fan Strong Suction (USA Stock)

Soldering Smoke Absorber, Anti-static Electric Iron Welding Fume

Specifications: Voltage: DC3-12V Power: 30W Color: White Size: approx 37*45.5*17.5cm Net weight: 2kg Plug:US plus Feature: 1. Absorption speed can be adjusted by itself, more flexibility 2. Strong absorption, effectively absorb the toxic fumes in the solder. 3. It can be illuminated while smoking away. Package including: One set smoke absorber

  • Brand: SHZICMY
  • ASIN: B07PTPCG9D
  • UPC: 692232742492

Extract-All S-981-2B Fume Extractor, Bench Mount, 350 CFM

Extract-All S-981-2B Fume Extractor, Bench Mount, 350

The Extract-All Model 981 compact Bench-Mount Fume Extraction System gives you a safer, healthier workplace by capturing air contaminants directly at the source and safely removing them before clean air is released into the room. Each unique air cleaning system is designed for lab fumes and dust, soldering, light welding, cleaning with solvents, paint and ink spraying, wire stripping, art restoration and conservation, clean room applications, small grinding operations, dental grinding, jewelry grinding and buffing, glue spraying, sanding operations, laser printing and numerous other applications which create airborne contaminants. The Extract-All Model S-981-2B Bench Mount System is a heavy duty, self-contained, recirculating air cleaner which provides Multi-Stage Filtration. The filtered air results in optimal working conditions and higher productivity in the workplace, with lower costs in energy and housekeeping. Each Extract-All system comes with two sets of mounting brackets to attach easily to table or benchtop, with the filter extending above or below. Filter options include a two stage polyester prefilter/ high efficiency cartridge designed to handle smoke, dust, and mist. Along with optional H.E.P.A. filters for "absolute filtration" and refillable adsorption modules for ...

  • Brand: Extract-All
  • ASIN: B006M6JB2E

Grizzly H8375 Portable Fume Extractor

Grizzly H8375 Portable Fume

This welding fume extractor has a unique paper filter on a roll that captures oil mist present in welding smoke. this oil would otherwise contaminate the pleated cartridge filter causing a dramatic decrease in efficiency until the pleated filter is replaced. once replaced the cycle would begin again. in this case the paper filter continuously captures the oil so maximum cfm is maintained. each filter stage is electronically monitored by a manometer which vibrates solids from the pleated filter and advances the paper filter. the 8-Inch suction boom with parabolic intake hood captures fumes right at the source. designed to be used with the g0650 downdraft/grinding table a 5-Inch gated tee can also be connected to provide downdraft air flow. * capture welding fumes right at the source * five stage filter system * baffle and fine screen capture large solids and sparks * 2-1/2-Inch inlet * overall size: 24-1/2-Inchl x 14-Inchw x 19-Inchh * includes 8-Inch flex hose 2-1/2-Inch x 10-Inch hood and adjustable hood support with magnetic and clamp-on base * approximate shipping weight: 70 lbs.

  • Color: Not applicable
  • Brand: Grizzly
  • ASIN: B006SJF3YU
  • UPC: 690550183751

Extract-All Portable Fume Extractor, For Welding and Powder Mixing Applications, Three-Stage Filtration

Extract-All Portable Fume Extractor, For Welding and Powder

The Extract-All Model SP-400 Portable Air Cleaning System offers versatility and high efficiency in a compact design. The SP-400 is designed for direct source-capture removal of smoke, dust, fumes, and other airborne contaminants from a wide variety of industrial and other applications. The SP-400 Will improve the air quality in your facility by effectively removing airborne contaminants before they enter the operator's breathing zone. 4" Diameter, adjustable 4'- 6' long extractor arm with fire-retardant properties. Convenient handle and casters provide easy mobility. High efficiency, yet low-cost replacement filters. Quiet operation. Long life blower motor. Cabinet: 16 gauge steel. Baked polyurethane powder painted (exterior and interior). Typical motor life: 100,000 hours (depending on operating conditions, including ambient temperature, duty cycle, etc.). Rated fan performance: 400 CFM at 2" E.S.P. Cabinet measures 20" width by 36" height by 20" depth.

  • Brand: Extract-All
  • ASIN: B007IXR9JW

Extract-All S-987-2A Portable Compact Fume Extractor, Two-Arm System, Multiple Mount, 350 CFM

Extract-All S-987-2A Portable Compact Fume Extractor, Two-Arm System,

The Extract-All compact Fume Extraction System gives you a safer, healthier workplace by capturing and removing contaminants at the source. The system collects and filters smoke, dust, and odors from: soldering, heat bending, dental grinding, light welding, sanding and grinding, solvents, mixing powders and chemicals, wire stripping, jewelry buffing and many other light to moderate industrial and laboratory activities. This is a dual arm system for multiple users. Arms are made of heavy-duty, chemical, abrasion, and heat resistant polypropylene with flame retardant characteristics. Can withstand temperatures from -40 to 180 degree F. Reach is from 36" to 53". Arms have no internal supports which allows optimum airflow and performance. CFM is increased by up to 50 percent over internally supported arms. Extractor Arms are Flexible, Can be bent, twisted and turned easily without breaking. Self Supporting rigid enough to retain its shape. Expandable diameter can be increased to form a hood or decreased to form a nozzle simply by twisting hose by hand. Optional Slotted inlet cover can be used as a backdraft/downdraft pickup. Slotted inlet cover options include 6" deep full hood. Exhaust Air Deflector diverts clean air downward. Blower: 350W, 2.8 amps, 120/1/60, 2000 RPM, variable spe...

  • Color: Black
  • Brand: Extract-All
  • ASIN: B006M6JBFQ
  • UPC: 819724012844
Similar Welding Fume Extractor Results
Welding Fume Extractor Video Results

Do Fume Extractors Really Work? - Kevin Caron

Welding Fume Extractor

#FumeExtractors #WeldingTips #WeldingSafety #KevinCaronArt From http://www.kevincaron.com - Artist Kevin Caron shares why he bought a fume extractor for his metalworking studio, then tests its ability to draw away smoke, fumes and particles .... Kevin Caron is going to fire up his AHP AlphaMIG ...

  • Likes: 342
  • View count: 5052
  • Dislikes: 4
  • Comments:
Tags: artist,fabricated steel,sculptor Kevin Caron,artist Kevin Caron,sculpture artist Kevin Caron,how-...

DIY Fume and Smoke Extractor

Welding Fume Extractor

I'm working on a new metal sculpture that will require a great deal of welding and with that comes a lot of smoke. So I had to build an extractor that could remove all of that smoke. After a quick search online and finding that most extractors were outside of my budget, I decided to build my own....

  • Likes: 243
  • View count: 7043
  • Dislikes: 4
  • Comments:
Tags: artfully rogue,diy fume extractor,smoke extractor,DIY welding smoke extractor,welding smoke exhau...

DIY WELDING FUME EXTRACTOR

Welding Fume Extractor

In this video I show the cheap way to build a welding fume extractor, to get rid of unhealthy smoke. Thanks for watching, please like comment, and subscribe.

  • Likes: 6
  • View count: 237
  • Dislikes: 0
  • Comments:
Tags: The Backyard Fabricator,Backyard Fabricator,how to weld,jet bandsaw stand,bandsaw stand,welding p...

MY HOMEMADE WELDING FUME EXTRACTOR

Welding Fume Extractor

This is my homemade welding exhaust fume extractor I made .

  • Likes: 93
  • View count: 11418
  • Dislikes: 41
  • Comments:
Tags: EXHAUST FUME EXTRACTOR,WELDING FUME EXTRACTOR,WELDING FUMES,MY HOMEMADE WELDING FUME EXTRACTOR,HO...

Getting an Avani SPC-2000 Welding Fume Extractor

Welding Fume Extractor

I finally got a fume extractor, aka "Smoke Eater" for the shop from our friends at Avani Environmental. It really does seem like an awesome unit... It's powerful, its simple to use, low maintenance and sounds like a jet engine taking off... I'll be sure to post a full review of this machine afte...

  • Likes: 368
  • View count: 30610
  • Dislikes: 12
  • Comments:
Tags: avani,enviromental,avani enviromental,use,using,usage,portable,weld,welder,welded,welding,fume,ex...